

Bass detector
LTSpice project to light up a LED diode when bass frequencies are detected in a sound provided by a 3.5 mm jack input (here is ac voltage source)
- Size
- 42.5 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 17
- Pads
- 66
- Tracks, vias
- 89, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Nov 2025
- Updated
- 13 Dec 2025
Overview
Bass detector is an open-source printed circuit board by eepyminded, from the eepyminded/LTSpice-Bass-Detector repository on GitHub. It is a 2-layer board of 42.5 × 56 mm with 27 parts on 17 nets, routed with 89 tracks and 17 vias.
It is built around the LM358 and SS12. Its parts include 15 resistors, 6 capacitors, 2 diodes, 2 connectors and 1 IC. It belongs with the audio and music boards of this library.
Main components
2README
README.mdLTspice bass detector
LTSpice project to light up a LED diode when bass frequencies are detected in a sound provided by a 3.5 mm jack input.
Screenshots
Circuit schematic in LTspice

Circuit schematic in KiCad

3D view in KiCad

LTspice simulation
If you want to check the circuit for a specific audio clip, change it to be a .wav file, put it in the project folder, change the name in LTspice of the V2 voltage source according to audio clip's name, then change the .tran directive to the amount of seconds your audio clip lasts. Next, check the voltage across the LED diode (A,K) to see when the LED diode lights up.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R9, R11 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R12, R13 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4 |
| 2 | 15k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R15 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 1k2 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 2.2u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 220k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 560R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 5k6 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J1 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | SS12 | Diode_SMD:D_SMA | D1 |
| 1 | SW_SPST | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
Similar boards
- 2 layers102 × 52 mm

- 4 layers38.5 × 47 mm

- 8 layers153.7 × 88.9 mm

Link
oro-os/link
The Oro OS CI/CD pipeline including PCBs, CAD files, firmware and server infrastructure
381 parts14MIT - 2 layers70 × 70 mm

AirSensor display
MarcFinns/AirSensor-for-HomeAssistant
AirSensor for HomeAssistant (hardware and software)
30 parts8 - 2 layers150 × 150 mm

BoardGame
jkordek1/Man-Don-t-Get-Angry-Board-game
"Man don't get mad" - electronic board game
218 parts5 - 2 layers71.8 × 50.4 mm

- 4 layers56 × 88 mm

Pico peltier
syauqi-alias/pico-peltier
A TEC Controller using Pico RP2350 with Analog Devices LT8722 full bridge driver rated at 15V 4A
99 parts1MIT - 4 layers68.8 × 68.6 mm

GMWM Analysis Board
thejamesrhodes/IMU-Quantisation-research-project
Research into quantisation effects in MEMS gyroscopes using custom STM32 hardware.
163 parts1MIT
Questions
How big is the Bass detector PCB?
It measures 42.5 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bass detector use?
27 parts, built around the LM358 and SS12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bass detector KiCad files?
From the eepyminded/LTSpice-Bass-Detector repository on GitHub, at the commit this page was made from: the board is bass_detector/bass_detector.kicad_pcb and its schematic bass_detector/bass_detector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bass detector design in my own project?
Its repository states no licence, so its author keeps all rights: ask eepyminded before reusing the design.