

Placa alimentacao
Repositório da EDROM-UFU destinado ao desenvolvimento do projeto humanoide para participação nas competições LARC e ROBOCUP.
- Copper layers
- 2
- Thickness
- 1.59 mm
- Parts
- 26
- Nets
- 9
- Pads
- 65
- Tracks, vias
- 60, 0
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Dec 2022
- Updated
- 15 Oct 2025
Overview
Placa alimentacao is an open-source printed circuit board by edromufu, from the edromufu/edromufu repository on GitHub, published under the MIT licence. It is a 2-layer board with 26 parts on 9 nets, routed with 60 tracks and 0 vias.
It is built around the TIP35C, XT60-M and 3296W-1-250. Its parts include 10 connectors, 5 diodes, 3 capacitors, 3 resistors and 2 transistors.
Main components
3README
README.mdHi there 👋
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 22-03-5035 | TTL-3PIN:TTL_3pin | J3, J4, J5, J6, J7, J8, J9, J10 |
| 4 | DIODE | Diode_THT:D_A-405_P12.70mm_Horizontal | D1, D2, D3, D4 |
| 2 | 0,1uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2, C3 |
| 2 | TIP35C | Package_TO_SOT_THT:TO-3PB-3_Vertical | Q1, Q2 |
| 2 | XT60-M | XT-60:AMASS_XT60-M | J1, J2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 2200 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 3296W-1-250 | XT-60:TRIM_3296W-1-250 | VR1 |
| 1 | 4700uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | LED | LED_THT:LED_D3.0mm | D5 |
| 1 | LM317L_TO92 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
Similar boards
- 2 layers158 × 64 mm

- 2 layers99.8 × 99.8 mm

Ozinverterkicad
PawelSroczynski/enklava
The Toloka application revives the traditional Central European concept of communal work parties ("toloka"), creating a digital platform that connects DIY project owners with skilled volunteers, learners, and mentors.
83 partsGPL-3.0 - 4 layers100.1 × 60.2 mm

Hades
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
215 parts1kBSD-3-Clause - 2 layers120 × 100 mm

Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT - 2 layers110 × 110 mm

- 2 layers107.9 × 63.2 mm

- 2 layers99.5 × 67 mm

Controller Board
kairobyte/bipedal_self_balance
A bipedal self balancing robot with 2DOF in each leg. Built from scratch.
23 parts7MIT - 4 layers65.8 × 77.2 mm

Questions
What parts does the Placa alimentacao use?
26 parts, built around the TIP35C, XT60-M and 3296W-1-250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Placa alimentacao KiCad files?
From the edromufu/edromufu repository on GitHub, at the commit this page was made from: the board is src/eletrica/placa-alimentação/placa_alimentacao/placa_alimentacao.kicad_pcb and its schematic src/eletrica/placa-alimentação/placa_alimentacao/placa_alimentacao.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Placa alimentacao design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).