
Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32

Code samples and ready projects based on bare-metal STM32
Stm32 is an open-source printed circuit board by eddyem, from the eddyem/stm32samples repository on GitHub. It is a 2-layer board of 93.5 × 55 mm with 67 parts on 61 nets, routed with 725 tracks and 33 vias.
It is built around the MAX3485ED, MCP2551-I/SN and LM1117-3.3, with the LM1117-5.0, MBRS130L and MM3Z3V9 among its other parts. Its parts include 18 resistors, 18 connectors, 12 capacitors, 8 diodes and 5 ICs. It belongs with the sensors and measurement and computers and single-board computers boards and the STM32 boards of this library.
The stm32samples repository is a collection of low-level, bare-metal code examples and complete
projects for various STM32 microcontroller series (F0, F1, F3, F4, G0). It uses CMSIS header files
from modm-io/cmsis-header-stm32 for register definitions.
-flto optimisationsdeprecated/This repository is a valuable resource for learning low‑level STM32 programming without vendor libraries. It covers practical applications:
For the latest updates, check the repository on GitHub.
This repository is provided under the GNU General Public License v3 or later. Full text of the GPLv3 is available at https://www.gnu.org/licenses/gpl-3.0.html.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1 | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3, C5, C7, C8, C9, C10, C11, C12 |
| 5 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R5, R6, R7, R8 |
| 4 | Hole | MountingHole:MountingHole_3.2mm_M3 | P2, P3, P4, P5 |
| 3 | 22 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R12, R18 |
| 3 | 47k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R15, R16, R17 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R10 |
| 2 | 120 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R9 |
| 2 | 47uF, 10V | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C4, C6 |
| 2 | Conn_01x08_Female | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3, J4 |
| 2 | MBRS130L | Diode_SMD:D_SMB_Handsoldering | D1, D2 |
| 2 | MM3Z3V9 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7, D8 |
| 2 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1, TP2 |
| 1 | +/- | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J5 |
| 1 | 0/1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J7 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 12v | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J10 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | 1A | MyFootprints:FuseHolder | F1 |
| 1 | 2/3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J8 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14 |
| 1 | A | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | AO3407 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q2 |
| 1 | B | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | CONN_02X03 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | J6 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J13 |
| 1 | DB9_Female | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J9 |
| 1 | DB9_Male | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J11 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LM1117-5.0 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | MAX3485 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | MCP2551-I/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | MM3Z7V5 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | PESD1CAN | TO_SOT_Packages_SMD:SOT-23_Handsoldering | D4 |
| 1 | PESD3V3L4UG | TO_SOT_Packages_SMD:SOT-363_SC-70-6_Handsoldering | D3 |
| 1 | RS-485 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J12 |
| 1 | SI2305 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1 |
| 1 | STM32F072CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U5 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | USB6B1 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | D6 |
| 1 | USB_A | Connectors_USB:USB_B_OST_USB-B1HSxx_Horizontal | P1 |

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32







eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32






festlv/mso5000-logic-probe
Cheap logic probe for Rigol MSO5000-series oscilloscopes



EmbeddedDesign/GotT-Translation-Circuit
A Bluetooth voice modulator for Dalek speech

msoe-vex/pcb-design
This repository is dedicated to storing files required for designing and creating PCB Boards


It measures 93.5 × 55 mm and has 2 copper layers, 2.5 mm thick.
67 parts, built around the MAX3485ED, MCP2551-I/SN, LM1117-3.3 and LM1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eddyem/stm32samples repository on GitHub, at the commit this page was made from: the board is F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/stm32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask eddyem before reusing the design.