4 layers160 × 80 mm
2 layers40 × 45 mm
LedDimmer
EBOThor/DTS_BoardDigital to Synchro board
- Size
- 40 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 29
- Pads
- 147
- Tracks, vias
- 210, 92
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Aug 2024
- Updated
- 28 Oct 2026
Overview
LedDimmer is an open-source printed circuit board by EBOThor, from the EBOThor/DTS_Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 45 mm with 67 parts on 29 nets, routed with 210 tracks and 92 vias.
It is built around the PIC12F1572-I/SN, TPS561243DRL and VS-10MQ100HM3/5AT, with the BSS138, BVSS84LT1G-VB and SSM3J133TU,LF among its other parts. Its parts include 16 resistors, 14 capacitors, 6 diodes, 6 transistors and 6 connectors. It belongs with the PIC boards of this library.
Main components
7
PIC12F1572-I/SN
SOIC-8-40℃~+85℃ 10bit 2.3V~5.5V 256Byte 3.5KB 32MHz 5bit 6 8 Bit Built-in FLASH PIC SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TPS561243DRL
SOT-563-40℃~+125℃@(TJ) 1 1.28MHz 110uA 1A 4.2V~17V 600mV~7V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
VS-10MQ100HM3/5AT
DO-214AC(SMA)-55℃~+150℃ 1 Independent 100V 100uA@100V 120A 1A 780mV@1A DO-214AC(SMA) Schottky Diodes ROHSVishay IntertechnologySchottky Diodes
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBVSS84LT1G-VB
SOT-23(TO-236)MOSFETsVBsemi Elec
SSM3J133TU,LF
2-2U1A1 P-Channel 107nC@4.5V 118pF 1V 20V 5.5A 500mW 840pF 88.4mΩ@1.5V 99pF P-Channel 2-2U1A MOSFETs ROHSToshibaMOSFETs
SRR1050HA-2R2Y
SMD,10.2x10mm2.2uH 7.2A 8.2A 9mΩ ±30% SMD,10.2x10mm Power Inductors ROHSBournsPower Inductors
README
README.mdDTS_Board
Digital to Synchro board
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n 25V | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5, C8, C9, C10, C11, C15, C16 |
| 8 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 5 | 5K0 | Resistor_SMD:R_0603_1608Metric | R3, R10, R11, R12, R14 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R5, R9, R18, R21 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | Screw_Terminal_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J3, J4, J5 |
| 3 | Fiducial_05_1 | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3 |
| 3 | LED R | LED_SMD:LED_0603_1608Metric | D3, D4, D5 |
| 3 | VS-10MQ100HM3 | Diode_SMD:D_SMA | D1, D2, D6 |
| 2 | 10u 50V | Capacitor_SMD:C_0805_2012Metric | C1, C14 |
| 2 | 130K | Resistor_SMD:R_0603_1608Metric | R2, R13 |
| 2 | 4u7 10V | Capacitor_SMD:C_0603_1608Metric | C4, C7 |
| 2 | 56R | Resistor_SMD:R_0603_1608Metric | R6, R8 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | BVSS84LT1G | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 2 | SSM3J133TU | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1, Q4 |
| 2 | Screw_Terminal_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J6 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 2.2uH 5.4A | Inductor_SMD:L_1210_3225Metric | L3 |
| 1 | 2.2uH 7.2A | bt_footprints:L_Bourns_bt_SRR1050HA | L1 |
| 1 | 24R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 30K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 47p 50V | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | PIC12F1572 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TPS561243 | Package_TO_SOT_SMD:SOT-563 | U1 |
Questions
How big is the LedDimmer PCB?
It measures 40 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LedDimmer use?
67 parts, built around the PIC12F1572-I/SN, TPS561243DRL, VS-10MQ100HM3/5AT and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LedDimmer KiCad files?
From the EBOThor/DTS_Board repository on GitHub, at the commit this page was made from: the board is HW/LED_Dimmer/LedDimmer/backup/LedDimmer.kicad_pcb and its schematic HW/CC_Debug/CC_Debug/CC USB hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LedDimmer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from EBOThor/DTS_Board
7- 4 layers160 × 80 mm
- 2 layers167.6 × 81.3 mm
- 2 layers40 × 45 mm
- 4 layers22 × 4 mm
- 2 layers90 × 50 mm
- 2 layers35.1 × 30.1 mm
Similar boards
- 4 layers63.5 × 53.3 mm
- 4 layers36 × 50.2 mm
Racer
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
83 parts3.8kApache-2.0 - 4 layers95 × 95 mm
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 2 layers54.6 × 70.9 mm
BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers44.2 × 29.3 mm
- 4 layers142.2 × 82.6 mm
A10-A20-OLINUXINO MICRO-4GB Rev D
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
558 parts429GPL-2.0 - 2 layers21.6 × 52.3 mm
Ps2 pico hat
No0ne/ps2x2pico
USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico
17 parts399MIT - 2 layers45 × 45 mm
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
61 parts379Apache-2.0