4 layers160 × 80 mm
4 layers160 × 80 mm
CC Debug
EBOThor/DTS_BoardDigital to Synchro board
- Size
- 160 × 80 mm
- Copper layers
- 4
- Thickness
- 1.7 mm
- Parts
- 223
- Nets
- 257
- Pads
- 866
- Tracks, vias
- 1,579, 308
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Aug 2024
- Updated
- 28 Oct 2026
Overview
CC Debug is an open-source printed circuit board by EBOThor, from the EBOThor/DTS_Board repository on GitHub, published under the MIT licence. It is a 4-layer board of 160 × 80 mm with 223 parts on 257 nets, routed with 1,579 tracks and 308 vias.
It is built around the ADUM1254ASA+, TPS62A01DRL and USB2514B/M2, with the ADUM1201BRZ, 93AA46BT-I/OT and FT4232HPQ among its other parts. Its parts include 84 resistors, 65 capacitors, 18 ICs, 9 connectors and 9 switches.
Main components
10
ADUM1254ASA+
SOIC-8Bidirectional automatic direction、Open-drain buffer output、Hotswap、Clock stretching、Multi-voltage domain interface SOIC-8 I2C Isolators ROHSMaxim Integrated (Analog Devices)I2C Isolators
TPS62A01DRL
SOT-563-40℃~+125℃@(TJ) 1 1A 2.4MHz 2.5V~5.5V 20uA 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
USB2514B/M2
SQFN-36-EP(6x6)0℃~+85℃ 3.3V 4 Hub I2C USB 2.0 SQFN-36-EP(6x6) USB HUB Controllers ROHSMicrochip TechnologyUSB ConvertersADUM1201BRZ
SOIC-8-40℃~+125℃ 1 1 10Mbps 2.7V~5.5V 2.7V~5.5V 2500 25kV/us 50ns SOIC-8 Digital Isolators ROHSAnalog DevicesDigital Isolators
93AA46BT-I/OT
SOT-23-6-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 1Kbit 200 Years 3MHz 6ms Built-in power-on reset (POR)、Built-in write enable latch (WEL)、Power-down/Power-up protection circuit SPI SOT-23-6 EEPROM ROHSMicrochip TechnologyEEPROM
FT4232HPQ
QFN64High Speed USB Bridge with Type-C/PD3.0 ControllerFTDIUncategorisedDS04-254-2-03BK-SMT
--40℃~+85℃ 2.54mm 24V 25mA 3 SPST - DIP Switches ROHSCUIDIP Switches
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
DLM0NSM900HY2D
SMD-4P,0.8x0.6mm-40℃~+85℃ 100mA 10MΩ 12.5V 2 3.8Ω 5V 90Ω@100MHz SMD-4P,0.8x0.6mm Common Mode Filters ROHSMurataCommon Mode Filters
62684-401100ALF
SMD,P=0.5mm,卧贴-55℃~+85℃ 0.5mm 2mm 40P Bottom Contact Gold Phosphor bronze Slide Lock Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSAmphenolFFC, FPC (Flat Flexible) Connector Assemblies
README
README.mdDTS_Board
Digital to Synchro board
Parts
223| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | 100n 25V | Capacitor_SMD:C_0603_1608Metric | C2001, C2002, C2003, C2004, C2005, C2006, C2007, C2008, C2009, C2010, C5001, C5002, C5003, C5004, C5005, C5006 +36 |
| 47 | 10K | Resistor_SMD:R_0603_1608Metric | R2002, R2003, R2004, R2005, R2006, R2008, R2012, R2014, R2015, R5001, R5003, R5004, R6001, R6002, R6005, R8001 +31 |
| 16 | 100R | Resistor_SMD:R_0603_1608Metric | R7001, R7002, R7003, R7004, R7005, R7006, R7007, R7008, R7009, R7010, R7011, R7012, R7013, R7014, R7015, R7016 |
| 12 | 10u 10V | Capacitor_SMD:C_0603_1608Metric | C2011, C2012, C2013, C2014, C5010, C5013, C5014, C6006, C6009, C6014, C7018, C7020 |
| 11 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP2001, TP5001, TP5002, TP5004, TP5005, TP5007, TP6001, TP6002, TP6003, TP6004, TP6005 |
| 9 | M;SW;3;SPST | bt_footprints:SW_DS04-254-2-03BK-SMT | SW8001, SW8002, SW8003, SW8004, SW8005, SW8006, SW8007, SW8008, SW8009 |
| 7 | 510R | Resistor_SMD:R_0603_1608Metric | R5006, R6006, R8031, R8032, R8033, R8036, R8037 |
| 7 | LED | LED_SMD:LED_0603_1608Metric | D5001, D6001, D8001, D8002, D8003, D8004, D8005 |
| 6 | 100K | Resistor_SMD:R_0603_1608Metric | R2001, R2007, R2009, R2010, R2011, R2018 |
| 6 | ADuM1201BR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7001, U7002, U7003, U7004, U7007, U7008 |
| 5 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q8001, Q8002, Q8003, Q8004, Q8005 |
| 5 | Conn_02x10_Odd_Even | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J8002, J8003, J8004, J8005, J8006 |
| 5 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP2002, TP5003, TP5006, TP6006, TP6007 |
| 4 | Fiducial_05_1 | Fiducial:Fiducial_0.5mm_Mask1mm | FID4001, FID4002, FID4003, FID4004 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H4001, H4002, H4003, H4004 |
| 3 | 12K | Resistor_SMD:R_0603_1608Metric | R2013, R5002, R6004 |
| 2 | 12Mhz,50ppm | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | U5001, U6002 |
| 2 | 2K2 | Resistor_SMD:R_0603_1608Metric | R5005, R6003 |
| 2 | 93AA46BT-I/OT | Package_TO_SOT_SMD:SOT-23-6 | U5003, U6001 |
| 2 | ADuM1254ASA+ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7005, U7006 |
| 2 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J8007, J8008 |
| 2 | FT4232H_QFN | Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm | U5002, U6003 |
| 1 | 100mA,90ohm, 5V | bt_footprints:DLM0NSM900HY2D | FL3001 |
| 1 | 1M | Resistor_SMD:R_1210_3225Metric | R7017 |
| 1 | 1n | Capacitor_SMD:C_1812_4532Metric | C7021 |
| 1 | 1uH | Inductor_SMD:L_0805_2012Metric | L2001 |
| 1 | 22K | Resistor_SMD:R_0603_1608Metric | R2016 |
| 1 | 24Mhz,50ppm | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | U2002 |
| 1 | 430K | Resistor_SMD:R_0603_1608Metric | R2017 |
| 1 | 62684-401100ALF | bt_footprints:62684-401100ALF | J8001 |
| 1 | ADuM6028-3 | Package_SO:SOIC-8_7.5x5.85mm_P1.27mm | U7009 |
| 1 | TPS62A01 | Package_TO_SOT_SMD:SOT-23-6 | U2003 |
| 1 | USB2514B/M2 | bt_footprints:SQFN36_6X6_MCH | U2001 |
| 1 | USB_B | Connector_USB:USB_B_TE_5787834_Vertical | J3001 |
Questions
How big is the CC Debug PCB?
It measures 160 × 80 mm and has 4 copper layers, 1.7 mm thick.
What parts does the CC Debug use?
223 parts, built around the ADUM1254ASA+, TPS62A01DRL, USB2514B/M2 and ADUM1201BRZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CC Debug KiCad files?
From the EBOThor/DTS_Board repository on GitHub, at the commit this page was made from: the board is HW/CC_Debug/CC_Debug/CC_Debug.kicad_pcb and its schematic HW/CC_Debug/CC_Debug/CC USB hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CC Debug design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from EBOThor/DTS_Board
7- 2 layers167.6 × 81.3 mm
- 2 layers40 × 45 mm
- 2 layers40 × 45 mm
- 4 layers22 × 4 mm
- 2 layers90 × 50 mm
- 2 layers35.1 × 30.1 mm
Similar boards
- 4 layers61.9 × 84.4 mm
FastStepper
harp-tech/device.faststepper
A fast moving stepper motor controller device, with acceleration, jerk control, and end stop support
141 parts - 4 layers234.1 × 105.6 mm
Gameconsole
Nikhil-Krishnamurthy/Retro-Gaming-Handheld
This project was creating a gaming handheld from scratch, including cadding the case and designing the pcb. This handheld will run retro games up to the SNES.
118 parts1 - 2 layers49.3 × 103.7 mm
- 4 layers92.7 × 76.2 mm
Dut artix7-a12t
GMUCERG/fobos
Flexible Open-source workBench fOr Side-channel analysis (FOBOS)
199 parts18Apache-2.0 - 8 layers45 × 70 mm
- 4 layers85 × 56 mm
- 4 layers120 × 92 mm
Kehvm
knewter/kvm-board
An open-source KVM-over-IP device built with a Milk-V Duo S (RISC-V) and ESP32-S3. Remotely control any computer's keyboard, video, and mouse over your network — at the hardware level, independent of the target's OS.
70 parts2 - 4 layers124 × 23 mm
Octobot controller
Deivid-Negoita/octobot
An eight-legged walking robot I built end to end: chassis CAD, a 24-servo ATmega32U4 controller board, the firmware, and a browser IK workbench you can drive it from.
120 parts1MIT