

DTS Board
Digital to Synchro board
- Size
- 167.6 × 81.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 118
- Pads
- 327
- Tracks, vias
- 364, 197
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Aug 2024
- Updated
- 28 Oct 2026
Overview
DTS Board is an open-source printed circuit board by EBOThor, from the EBOThor/DTS_Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 167.6 × 81.3 mm with 86 parts on 118 nets, routed with 364 tracks and 197 vias.
It is built around the LM324AD, TEENSY 4.1 and LM1875T. Its parts include 30 resistors, 27 capacitors, 11 ICs, 5 connectors and 2 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3LM324AD
SOIC-14-16V~-1.5V、1.5V~16V -25℃~+85℃ 1.2MHz 2nA 300nA 35nV/√Hz@1kHz 3V~32V 4 500V/ms 60mA 7mV 800uA 80dB EMI filtering/RF suppression SOIC-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierTEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedLM1875T
TO-220B-50.015% 16V~60V 70mA 83dB、95dB TO-220B-5 Audio Amplifiers ROHSHGSEMIAudio Amplifiers
README
README.mdDTS_Board
Digital to Synchro board
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0805_2012Metric | C2003, C2004, C2005, C5002, C5003, C5004, C5005, C5006 |
| 8 | 1u | Capacitor_SMD:C_1206_3216Metric | C6001, C6002, C6003, C6004, C6007, C6008, C6009, C6010 |
| 7 | 10k | Resistor_SMD:R_0805_2012Metric | R2004, R2005, R3003, R3004, R3005, R6001, R6002 |
| 6 | 33p | Capacitor_SMD:C_0805_2012Metric | C2001, C2002, C3002, C3003, C6005, C6006 |
| 5 | 120 | Resistor_SMD:R_0805_2012Metric | R5005, R5006, R5007, R5008, R5013 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric | R3006, R5001, R5002, R5003, R5004 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric | R5009, R5010, R5011, R5012 |
| 4 | 20k | Potentiometer_THT:Potentiometer_Bourns_3266W_Vertical | RV3001, RV3002, RV6001, RV6002 |
| 4 | 20k | Resistor_SMD:R_0805_2012Metric | R2002, R2003, R2006, R2007 |
| 3 | 47u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C4001, C4002, C4003 |
| 2 | 1N5400 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D4001, D4002 |
| 2 | Heatsink_Pad | Heatsink:Heatsink_Fischer_SK104-STCB_35x13mm__2xDrill3.5mm_ScrewM3 | HS6001, HS6002 |
| 2 | LM1875 | Package_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U6001, U6002 |
| 2 | LM324A | Package_DIP:DIP-14_W7.62mm | U2002, U3001 |
| 2 | R | Resistor_SMD:R_0805_2012Metric | R3001, R3002 |
| 1 | 22p | Capacitor_SMD:C_0805_2012Metric | C5001 |
| 1 | 2k2 | Resistor_SMD:R_0805_2012Metric | R5016 |
| 1 | 3k3 | Resistor_SMD:R_0805_2012Metric | R5015 |
| 1 | 4.7n | Capacitor_SMD:C_0805_2012Metric | C3001 |
| 1 | 400Hz | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J1001 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R5014 |
| 1 | CAN | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical | J1003 |
| 1 | DTS | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical | J1004 |
| 1 | ETH | z_mylib:RJ45_LED_Shield | J5001 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U4003 |
| 1 | LM7815_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U4001 |
| 1 | LM7915_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U4002 |
| 1 | LTC1590 | Package_DIP:DIP-16_W7.62mm | U2001 |
| 1 | MCP2551-I-P | Package_DIP:DIP-8_W7.62mm | U5003 |
| 1 | PC847 | Package_DIP:DIP-16_W7.62mm | U5001 |
| 1 | Power | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical | J1002 |
| 1 | TRANSF5 | z_mylib:Audio_trafo_6_pin | TR3001 |
| 1 | Teensy4.1 | teensy:Teensy41 | U5002 |
The 82 most common of 86 parts.
More from EBOThor/DTS_Board
7- 4 layers160 × 80 mm

- 4 layers160 × 80 mm

- 2 layers40 × 45 mm

- 2 layers40 × 45 mm

- 4 layers22 × 4 mm

- 2 layers90 × 50 mm

- 2 layers35.1 × 30.1 mm

Similar boards
- 4 layers100 × 100 mm

PerfectV2.1v0
fer-clerkx/speeduino-expo
Speeduino board using Teensy 4.1 adapted from V0.4.4c design
170 parts1 - 2 layers70 × 50 mm

- 2 layers96.5 × 74.9 mm

MirrorDeflectionDriver
ElectronicsTinkerer/3D-Printable-MEMS-Mirror
Files for a 3D-printable MEMS mirror.
47 parts5MIT - 2 layers374 × 121 mm

- 2 layers79.6 × 79.6 mm

Amplifier
abierto-cc/joselito
Repositorio del único amplificador que hace justicia a una de las estrellas más brillantes de la canción en habla hispana ... ¡Joselito!
29 parts2 - 2 layers228 × 100 mm

AMP MA
pivikd/AMP-MA
AMP-AM (standing for Modus Aequale, signifying a rhythmic, ideal tone and modular structure) is an open-source, transistor-based guitar combo amplifier project.
148 parts1CERN-OHL-S-2.0 - 2 layers155 × 90 mm

- 2 layers158.3 × 70 mm

Questions
How big is the DTS Board PCB?
It measures 167.6 × 81.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DTS Board use?
86 parts, built around the LM324AD, TEENSY 4.1 and LM1875T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DTS Board KiCad files?
From the EBOThor/DTS_Board repository on GitHub, at the commit this page was made from: the board is HW/DTS_Board/DTS_Board.kicad_pcb and its schematic HW/CC_Debug/CC_Debug/CC USB hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DTS Board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).