Skip to the content
16 layers80 × 90 mmJunction Box, the printed circuit board in 3D

Repository for holding PCB designs, Pspice files, and other shocking thigns!

Size
80 × 90 mm
Copper layers
16
Thickness
1.6 mm
Parts
108
Nets
102
Pads
396
Tracks, vias
1,371, 168
Pours
6
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Jan 2019
Updated
11 May 2019

Overview

Junction Box is an open-source printed circuit board by EasternEdgeRobotics, from the EasternEdgeRobotics/Electrical_2019 repository on GitHub, published under the MIT licence. It is a 16-layer board of 80 × 90 mm with 108 parts on 102 nets, routed with 1,371 tracks and 168 vias.

It is built around the ATTINY45-20XU, FT230XS-R and BC817-40. Its parts include 42 capacitors, 24 resistors, 9 crystals, 6 diodes and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

2019-Electrical

Electrical files for MATE 2019

Looking for documentation? See the wiki.

Looking for control software? See the 2019 repo.

Parts

108
QtyValueFootprintReferences
170.1uFJunction Box:C0603C2, C5, C7, C8, C10, C14, C16, C18, C21, C23, C25, C28, C30, C32, C37, C38 +1
120.22uFJunction Box:C0603C1, C4, C6, C13, C15, C17, C20, C22, C24, C27, C29, C31
80.27Junction Box:R0805R2, R4, R9, R10, R13, R14, R17, R18
6C-GRID-04-70553Junction Box:70553-04X2, X3, X5, X6, X7, X8
6LEDCHIP-LED0603Junction Box:CHIP-LED0603LED1, LED2, LED3, LED4, LED5, LED6
6RINGSCREWJunction Box:RINGSCREWU$5, U$6, U$7, U$8, U$9, U$10
4100KJunction Box:R0603R1, R3, R11, R15
447uFJunction Box:C1206C3, C19, C26, C33
4A4982Junction Box:A4982U$1, U$2, U$3, U$4
3330Junction Box:R0603R8, R21, R22
3JP1EJunction Box:JP1JP1, JP2, JP4
20.01uFJunction Box:C0603C40, C41
210uFJunction Box:C0603C34, C39
2180Junction Box:R0603R12, R23
222pFJunction Box:C0603C11, C12
227Junction Box:R0603R19, R20
247pFJunction Box:C0603C35, C36
26.2KJunction Box:R0603R6, R7
2BC817-40Junction Box:SOT23U3, U4
110KJunction Box:R0603R5
11KJunction Box:R0603R24
11uFJunction Box:C0603C42
16.2KJunction Box:M1206R16
1ATMEGA328P-AURJunction Box:32AU1
1ATTINY45-20XUJunction Box:8XU2
1C-GRID-02-70553Junction Box:70553-02X9
1C-GRID-03-70553Junction Box:70553-03X4
1C1S_1.5Junction Box:C1F1
1CRYSTALJunction Box:CRYSTALQ1
1EERLOGOJunction Box:EERLOGOU$12
1EERLOGOLONGJunction Box:EERLOGOLONGU$14
1FT230XSJunction Box:SSOP16IC1
1MILOGOJunction Box:MILOGOU$16
1MINI-USB-32005-201Junction Box:32005-201X1
1MUNLOGOJunction Box:MUNLOGOU$15
1PINHD-1X6Junction Box:1X06JP3
1RELAYJunction Box:RELAYU$13
1RESETSWITCHJunction Box:RESETSWITCHU$11

More from EasternEdgeRobotics/Electrical_2019

8
  • 2 layers60 × 85 mmPower Distribution Board, the printed circuit board in 3D

    Power Distribution Board

    EasternEdgeRobotics/Electrical_2019

    Repository for holding PCB designs, Pspice files, and other shocking thigns!

    114 parts2MIT
  • 2 layers104.7 × 67.4 mmTooling Board, the printed circuit board in 3D

    Tooling Board

    EasternEdgeRobotics/Electrical_2019

    Repository for holding PCB designs, Pspice files, and other shocking thigns!

    95 parts2MIT
  • 2 layers58.4 × 36.8 mmDC DC Board Micro, the printed circuit board in 3D

    DC DC Board Micro

    EasternEdgeRobotics/Electrical_2019

    Repository for holding PCB designs, Pspice files, and other shocking thigns!

    56 parts2MIT
  • 2 layers58.4 × 36.8 mmDC DC Board, the printed circuit board in 3D

    DC DC Board

    EasternEdgeRobotics/Electrical_2019

    Repository for holding PCB designs, Pspice files, and other shocking thigns!

    38 parts2MIT
  • 2 layers26 × 44 mmCamCon Board Rev 1.1, the printed circuit board in 3D

    CamCon Board Rev 1.1

    EasternEdgeRobotics/Electrical_2019

    Repository for holding PCB designs, Pspice files, and other shocking thigns!

    29 parts2MIT
  • 2 layers44.9 × 45.8 mmMaestro Adapter, the printed circuit board in 3D

    Maestro Adapter

    EasternEdgeRobotics/Electrical_2019

    Repository for holding PCB designs, Pspice files, and other shocking thigns!

    28 parts2MIT
  • 2 layers56 × 65 mmDual CamCon, the printed circuit board in 3D

    Dual CamCon

    EasternEdgeRobotics/Electrical_2019

    Repository for holding PCB designs, Pspice files, and other shocking thigns!

    14 parts2MIT
  • 2 layers11.5 × 11.5 mmBAR30-SENSOR, the printed circuit board in 3D

    BAR30-SENSOR

    EasternEdgeRobotics/Electrical_2019

    Repository for holding PCB designs, Pspice files, and other shocking thigns!

    10 parts2MIT

Similar boards

  • 2 layersMP Tracker, the printed circuit board in 3D

    MP Tracker

    elektra42/freifunk-open-mppt

    Open hard- and software solar maximum power point tracker

    70 parts89
  • 2 layers44.2 × 32.6 mmWiring, the printed circuit board in 3D

    Wiring

    esp-ebus/ebus-adapter-hardware

    This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.

    49 parts44
  • 11 layers74.2 × 29.2 mmSolderingStationPCB, the printed circuit board in 3D

    SolderingStationPCB

    clytle374/Open-T12-Soldering-Station

    This is a clone of the cheap T12 soldering stations, attempting to eliminate the shortfalls of the cheap designs.

    68 parts43GPL-3.0
  • 6 layers69.6 × 46.1 mmCarrier, the printed circuit board in 3D

    Carrier

    KaiPereira/CM5-SODIMM-Carrier

    A fully open source CM5 carrier to turn your Pi into a Jetson in compact SO-DIMM format!

    98 parts29
  • 4 layersIONPAK2, the printed circuit board in 3D

    IONPAK2

    m-labs/ionpak

    A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)

    259 parts23
  • 2 layers24 × 24 mmBlue - 1.2mm, the printed circuit board in 3D

    Blue - 1.2mm

    flummer/pcb-color-samples

    Small PCB color samples to be used when designing printed circuit boards

    25 parts21CC-BY-SA-4.0
  • 2 layers96.3 × 93.6 mmESP OpenMppt, the printed circuit board in 3D

    ESP OpenMppt

    ISEMS/ISEMS-ESP32

    ISEMS-Port for Solarnodes based on ESP32 Microcontrollers

    75 parts11
  • 2 layers56.5 × 53.3 mmCompressorController, the printed circuit board in 3D

    CompressorController

    ieb/fridgeController

    Secop or Danfoss 12v fridge compressor controller

    21 parts10

Questions

How big is the Junction Box PCB?

It measures 80 × 90 mm and has 16 copper layers, 1.6 mm thick.

What parts does the Junction Box use?

108 parts, built around the ATTINY45-20XU, FT230XS-R and BC817-40. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Junction Box KiCad files?

From the EasternEdgeRobotics/Electrical_2019 repository on GitHub, at the commit this page was made from: the board is PCBs/Junction Box/Junction Box.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Junction Box design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).