16 layers80 × 90 mm
Junction Box
EasternEdgeRobotics/Electrical_2019
Repository for holding PCB designs, Pspice files, and other shocking thigns!
108 parts2MIT
2 layers60 × 85 mm
Power Distribution Board
EasternEdgeRobotics/Electrical_20192Repository for holding PCB designs, Pspice files, and other shocking thigns!
- Size
- 60 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 114
- Nets
- 65
- Pads
- 410
- Tracks, vias
- 687, 90
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Jan 2019
- Updated
- 11 May 2019
Overview
Power Distribution Board is an open-source printed circuit board by EasternEdgeRobotics, from the EasternEdgeRobotics/Electrical_2019 repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 85 mm with 114 parts on 65 nets, routed with 687 tracks and 90 vias.
It is built around the TLV733PDBV. Its parts include 41 capacitors, 29 connectors, 15 resistors, 12 ICs and 4 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
1README
README.md2019-Electrical
Electrical files for MATE 2019
Looking for documentation? See the wiki.
Looking for control software? See the 2019 repo.
Parts
114| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | Conn_01x01 | EER:RingTerminal | J1, J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23 +11 |
| 23 | 1uF | Capacitors_SMD:C_0603 | C1, C2, C13, C14, C15, C16, C21, C22, C23, C25, C27, C28, C29, C31, C33, C35 +7 |
| 13 | 0.1uF | Capacitors_SMD:C_0603 | C3, C4, C9, C10, C11, C12, C17, C18, C19, C20, C30, C34, C41 |
| 12 | 1k | Resistors_SMD:R_0603 | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R14 |
| 10 | ACS711 | EER:ACS711 | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10 |
| 3 | 10uF | Capacitors_SMD:C_0805 | C24, C26, C32 |
| 2 | 22pF | Capacitors_SMD:C_0603 | C37, C38 |
| 2 | Ferrite_Bead | Inductors_SMD:L_0805 | L1, L2 |
| 2 | ORNGE | LEDs:LED_0805 | D3, D4 |
| 1 | 10k | Resistors_SMD:R_0603 | R15 |
| 1 | 32.7680kHz | EER:Crystal_SMD_3215-2pin_3.2x1.5mm | Y1 |
| 1 | 330 | Resistors_SMD:R_0603 | R12 |
| 1 | 500mA | EER:Fuse_SMD1206_Reflow | F1 |
| 1 | 680 | Resistors_SMD:R_0603 | R13 |
| 1 | ATSAMD21E16L-MFT | EER:QFN-32-1EP_5x5mm | U12 |
| 1 | BLUE | LEDs:LED_0805 | D1 |
| 1 | Conn_02x05_Odd_Even | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm | J29 |
| 1 | EERLOGO | EER:EERLOGO | U$12 |
| 1 | EERLOGOLONG | EER:EERLOGOLONG | U$14 |
| 1 | MILOGO | EER:MILOGO | U$16 |
| 1 | MUNLOGO | EER:MUNLOGO | U$15 |
| 1 | RED | LEDs:LED_0805 | D2 |
| 1 | SW_Push | EER:SW_SPST_EVQPE1 | SW1 |
| 1 | TLV733P | TO_SOT_Packages_SMD:SOT-23-5 | U11 |
| 1 | USB_B_Mini | EER:32005-201 | J28 |
The 110 most common of 114 parts.
More from EasternEdgeRobotics/Electrical_2019
8- 2 layers104.7 × 67.4 mm
Tooling Board
EasternEdgeRobotics/Electrical_2019
Repository for holding PCB designs, Pspice files, and other shocking thigns!
95 parts2MIT - 2 layers58.4 × 36.8 mm
DC DC Board Micro
EasternEdgeRobotics/Electrical_2019
Repository for holding PCB designs, Pspice files, and other shocking thigns!
56 parts2MIT - 2 layers58.4 × 36.8 mm
DC DC Board
EasternEdgeRobotics/Electrical_2019
Repository for holding PCB designs, Pspice files, and other shocking thigns!
38 parts2MIT - 2 layers26 × 44 mm
CamCon Board Rev 1.1
EasternEdgeRobotics/Electrical_2019
Repository for holding PCB designs, Pspice files, and other shocking thigns!
29 parts2MIT - 2 layers44.9 × 45.8 mm
Maestro Adapter
EasternEdgeRobotics/Electrical_2019
Repository for holding PCB designs, Pspice files, and other shocking thigns!
28 parts2MIT - 2 layers56 × 65 mm
Dual CamCon
EasternEdgeRobotics/Electrical_2019
Repository for holding PCB designs, Pspice files, and other shocking thigns!
14 parts2MIT - 2 layers11.5 × 11.5 mm
BAR30-SENSOR
EasternEdgeRobotics/Electrical_2019
Repository for holding PCB designs, Pspice files, and other shocking thigns!
10 parts2MIT
Similar boards
- 4 layers6.3 × 6.4 mm
- 4 layers62.8 × 75.6 mm
- 6 layers87 × 81 mm
- 4 layers34.6 × 30.8 mm
Gregdavill advent calendar of circuits 2020 esp32s2 lepton
oomlout/oomlout_oomp_project_bot_v_2
69 parts - 2 layers142.9 × 114.9 mm
SofleKeyboard
josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards
114 parts2.6k - 2 layers208.8 × 393.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
114 parts1.3k - 2 layers284 × 140.8 mm
Atreis
dekonnection/atreis
Based on Keebio's Iris keyboard design files, modified to achieve the same layout in a single-piece form-factor.
114 parts124MIT - 2 layers126.7 × 100.2 mm
Questions
How big is the Power Distribution Board PCB?
It measures 60 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power Distribution Board use?
114 parts, built around the TLV733PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power Distribution Board KiCad files?
From the EasternEdgeRobotics/Electrical_2019 repository on GitHub, at the commit this page was made from: the board is PCBs/Power Distribution Board/Power Distribution Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power Distribution Board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).