

Room cpu32
Misc smart house hardware
- Size
- 69.9 × 45.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 40
- Pads
- 143
- Tracks, vias
- 350, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 25 Oct 2017
- Updated
- 11 Oct 2023
Overview
Room cpu32 is an open-source printed circuit board by dzavalishin, from the dzavalishin/hardware repository on GitHub. It is a 2-layer board of 69.9 × 45.1 mm with 35 parts on 40 nets, routed with 350 tracks and 19 vias.
It is built around the ATMEGA32-16PU and RS485. Its parts include 10 resistors, 8 capacitors, 5 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32-16PU
PDIP-40-40℃~+85℃ 10bit 16MHz 1KB 2KB 32 32KB 4.5V~5.5V 8 Bit AVR Built-in FLASH PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)RS485
SOP-81 1 1.2mA 2.5Mbps 256 5V Half-Duplex Transceiver ±4kV SOP-8 RS-485 / RS-422 ICs ROHSGRRS-485 / RS-422 ICs
README
README.mdhardware
Misc smart house hardware, kicad designs.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Mounting_Holes:MountingHole_3.2mm_M3 | , , , | |
| 4 | 0,1 | Capacitors_SMD:C_1206_HandSoldering | C1, C2, C4, C8 |
| 4 | 10k | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3, R5 |
| 3 | 2,7k | Resistors_SMD:R_1206_HandSoldering | R4, R8, R9 |
| 2 | 1,0 | Capacitors_SMD:C_1206_HandSoldering | C3, C7 |
| 2 | 18pF | Capacitors_SMD:C_1206_HandSoldering | C5, C6 |
| 2 | 2,2k | Resistors_SMD:R_1206_HandSoldering | R6, R7 |
| 1 | 120uH | Choke_SMD:Choke_SMD_1206_Handsoldering | L1 |
| 1 | 16MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | 1k | Resistors_SMD:R_1206_HandSoldering | R10 |
| 1 | ATMEGA32-16PU | Housings_DIP:DIP-40_W15.24mm_LongPads | U2 |
| 1 | Bus | Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mm | P1 |
| 1 | Comparator | Potentiometers:Potentiometer_Trimmer-EVM3E | RV1 |
| 1 | Fail | LEDs:LED_D3.0mm | D2 |
| 1 | IO | LEDs:LED_D3.0mm | D1 |
| 1 | JTAG | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | J1 |
| 1 | Jumper | Oddities:NetTie-I_Connected_SMD | JP1 |
| 1 | ModbusAddrL | Pin_Headers:Pin_Header_Straight_2x02_Pitch2.54mm | P3 |
| 1 | RS485 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P2 |
| 1 | SPI | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | J2 |
| 1 | ST485 | Housings_SOIC:SO-8_5.3x6.2mm_Pitch1.27mm | U1 |
More from dzavalishin/hardware
12- 2 layers

- 2 layers156.2 × 86.4 mm

- 2 layers

- 2 layers124.5 × 81.3 mm

- 2 layers254 × 55.9 mm

- 2 layers71 × 140 mm

- 2 layers106.7 × 58.4 mm

- 2 layers108 × 77.5 mm

- 2 layers68.9 × 118.5 mm

- 2 layers155 × 58 mm

- 2 layers90.2 × 72.4 mm

- 2 layers20.3 × 200.7 mm

Similar boards
- 2 layers73.7 × 83.8 mm

- 2 layers119.4 × 88.9 mm

USB MidiController
derrudi187/USB-MidiController
MidiController based on Atmel with V-USB powered by http://www.obdev.at/vusb/
31 partsGPL-3.0 - 2 layers100 × 80 mm

ATmega32 EEPROM Storage
DINHO365/ATmega32_EEPROM_Data_Storage
Demonstrates internal EEPROM read/write on the ATmega32 by letting a user increment/decrement a value in RAM, save it to EEPROM, read it back, clear it, and recover it after reset or a power cycle.
26 parts - 2 layers189.2 × 124.5 mm

- 2 layers

ATMEGA 32 1
ernest-czachorowski/Flood-Sensors-KiCad-Files
This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.
74 partsMIT - 2 layers89.5 × 56.5 mm

- 2 layers149.9 × 106.7 mm

- 2 layers168.5 × 160.6 mm

AUTOMATIC LIGHT SENSOR
josbertbaingana2002-bot/ATmega32_LDR_Automatic_Lighting
Automatic Lighting System using ATmega32, LDR, KiCad and SimulIDE
29 parts
Questions
How big is the Room cpu32 PCB?
It measures 69.9 × 45.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Room cpu32 use?
35 parts, built around the ATMEGA32-16PU and RS485. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Room cpu32 KiCad files?
From the dzavalishin/hardware repository on GitHub, at the commit this page was made from: the board is _Boards/room_unit/cpu32/room_cpu32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Room cpu32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dzavalishin before reusing the design.