Skip to the content
2 layers23 × 92 mmBlack Mage Eyes, the printed circuit board in 3D

this is purely a prototype, unsure if this will work.

Size
23 × 92 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
39
Pads
57
Tracks, vias
69, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
29 Oct 2023
Updated
29 Oct 2023

Overview

Black Mage Eyes is an open-source printed circuit board by dukeofdummies, from the dukeofdummies/expressiveeyes repository on GitHub. It is a 2-layer board of 23 × 92 mm with 6 parts on 39 nets, routed with 69 tracks and 0 vias.

It is built around the RJ45. Its parts include 2 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

6
QtyValueFootprintReferences
1ARDUINO_PRO_MINIcustomfootprints:MODULE_ARDUINO_PRO_MINIU2
1CCapacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mmC1
1RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1RJ45Connector_RJ:RJ45_Amphenol_54602-x08_HorizontalJ2
1USB_BConnector_USB:USB_B_Amphenol_MUSB-D511_Vertical_RuggedJ1
1~Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_VerticalNEO1

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 4 layers84 × 82 mmToad, the printed circuit board in 3D

    Toad

    travisgoodspeed/goodfet

    An embedded bus adapter for various microcontrollers and radios.

    241 parts333
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99
  • 2 layers50 × 55.4 mmCasserole, the printed circuit board in 3D

    Casserole

    puddly/casserole

    Control GE appliances

    23 parts94Apache-2.0
  • 2 layers67.9 × 47.8 mmPlatine, the printed circuit board in 3D

    Platine

    nv1t/standing-desk-interceptor

    I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project

    11 parts52CC0-1.0
  • 4 layers90 × 75 mmCM4 2 Backup, the printed circuit board in 3D

    CM4 2 Backup

    olvint/CM4-NAS-MiniPCIE

    Raspberry Pi CM4 based NAS solution board

    21 parts51
  • 4 layers73.9 × 84.5 mmAei, the printed circuit board in 3D

    Aei

    Severson-Group/AMDC-Hardware

    Circuit board designs for controlling advanced motor systems

    54 parts51
  • 2 layers99 × 60 mmPwr, the printed circuit board in 3D

    Pwr

    mfkiwl/KiwiSDR_PCB

    KiCAD PCB files for KiwiSDR project including active antenna and bias tee

    64 parts46

Questions

How big is the Black Mage Eyes PCB?

It measures 23 × 92 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Black Mage Eyes use?

6 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Black Mage Eyes KiCad files?

From the dukeofdummies/expressiveeyes repository on GitHub, at the commit this page was made from: the board is Black Mage Eyes/Black Mage Eyes.kicad_pcb and its schematic Black Mage Eyes/Black Mage Eyes.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Black Mage Eyes design in my own project?

Its repository states no licence, so its author keeps all rights: ask dukeofdummies before reusing the design.