
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

this is purely a prototype, unsure if this will work.
Black Mage Eyes is an open-source printed circuit board by dukeofdummies, from the dukeofdummies/expressiveeyes repository on GitHub. It is a 2-layer board of 23 × 92 mm with 6 parts on 39 nets, routed with 69 tracks and 0 vias.
It is built around the RJ45. Its parts include 2 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ARDUINO_PRO_MINI | customfootprints:MODULE_ARDUINO_PRO_MINI | U2 |
| 1 | C | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J2 |
| 1 | USB_B | Connector_USB:USB_B_Amphenol_MUSB-D511_Vertical_Rugged | J1 |
| 1 | ~ | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | NEO1 |

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.



nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project


Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems

mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
It measures 23 × 92 mm and has 2 copper layers, 1.6 mm thick.
6 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dukeofdummies/expressiveeyes repository on GitHub, at the commit this page was made from: the board is Black Mage Eyes/Black Mage Eyes.kicad_pcb and its schematic Black Mage Eyes/Black Mage Eyes.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dukeofdummies before reusing the design.