
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

For the code behind the eyes here https://www.youtube.com/watch?v=K9V43iSXRQA
BlackMageEyes is an open-source printed circuit board by dukeofdummies, from the dukeofdummies/BlackMageEyes repository on GitHub. It is a 2-layer board of 23 × 92 mm with 6 parts on 36 nets, routed with 60 tracks and 0 vias.
It is built around the RJ45. Its parts include 2 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
For the code behind the eyes here https://www.youtube.com/watch?v=K9V43iSXRQA
The main gyst of this code is to read button pushes (contact closures) from a controller to change patterns in Adafruit's Neopixel Array.
For details on the Hardware behind it see here https://www.deviantart.com/dukeofdummies
This current eye pattern is one strand in this orientation zig zagging up and down, many LEDs aren't actually used
0 18 36 54 55 56 57 58 59 60 78 96
1 17 19 35 37 53 61 77 79 95 97 113
2 16 20 34 38 52 62 76 80 94 98 112
3 15 21 33 39 51 63 75 81 93 99 111
4 14 22 32 40 50 64 74 82 92 100 110
5 13 23 31 41 49 65 73 83 91 101 109
6 12 24 30 42 48 66 72 84 90 102 108
7 11 25 29 43 47 67 71 85 89 103 107
8 10 26 28 44 46 68 70 86 88 104 106
9 27 45 69 87 105every expression also has a positive number associated with it in the "expression" variable. If we're already expressing the expression, the code shouldn't do anything. (this saves on quite a bit of power) Each expression is associated with a number.
The general pattern will look like this
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ARDUINO_PRO_MINI | customfootprints:MODULE_ARDUINO_PRO_MINI | U2 |
| 1 | C | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J2 |
| 1 | USB_B | Connector_USB:USB_B_Amphenol_MUSB-D511_Vertical_Rugged | J1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | NEO1 |

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.



nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project


Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems

mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
It measures 23 × 92 mm and has 2 copper layers, 1.6 mm thick.
6 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dukeofdummies/BlackMageEyes repository on GitHub, at the commit this page was made from: the board is Black Mage Eyes board/Black Mage Eyes.kicad_pcb and its schematic Black Mage Eyes board/Black Mage Eyes.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dukeofdummies before reusing the design.