
Duet2
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

The KiCAD source for the Duet 3d printer controller see www.duet3d.com
EthernetModule is an open-source printed circuit board by Duet3D, from the Duet3D/Duet-2-Hardware repository on GitHub. It is a 2-layer board of 37.4 × 33.8 mm with 36 parts on 32 nets, routed with 475 tracks and 44 vias.
It is built around the W5500. Its parts include 15 resistors, 14 capacitors, 3 connectors, 2 inductors and 1 IC. It belongs with the robots and motor control boards of this library.
The Duet 2 3D Printer Controller design files repository.
For hardware ourhcases see https://www.duet3d.com/
Duet Hardware runs RepRapFirmware: https://github.com/Duet3D/RepRapFirmware
Documentation: https://docs.duet3d.com/Duet3D_hardware/Duet_2_family
Design by Tony Lock and David Crocker More info: https://www.duet3d.com/ LICENSE: see the LICENSE file in the repository
Design by Tony Lock, based on the Duet 0.6 More info here: http://blog.think3dprint3d.com/2015/08/new-duet-electronics-version-085.html LICENSE: http://www.ohwr.org/attachments/2388/cern_ohl_v_1_2.txt
Design by Andy Hingston, Tony Lock, Adrian Bowyer with much advice from Chris Palmer. More info here: http://blog.think3dprint3d.com/2013/12/Duet-Arduino-Due-compatible-3DPrinter-controller.html LICENSE: http://www.ohwr.org/attachments/2388/cern_ohl_v_1_2.txt
Developed in KiCAD: http://www.kicad-pcb.org/display/KICAD/KiCad+EDA+Software+Suite
Please use the forum for support requests.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 33R | complib:R_0603 | R6, R7, R8, R9 |
| 4 | 49R9 | complib:R_0603 | R3, R4, R12, R13 |
| 3 | 0u1 | complib:C_0603 | C1, C2, C3 |
| 2 | 10n | complib:C_0603 | C9, C11 |
| 2 | 10uF/16V | complib:C_1206_pol | C4, C5 |
| 2 | 18p | complib:C_0603 | C13, C14 |
| 2 | 1M | complib:R_0603 | R1, R10 |
| 2 | 220R | complib:R_0603 | R11, R15 |
| 2 | 6n8 | complib:C_0603 | C6, C7 |
| 2 | L_MINI | complib:R_0603 | L1, L2 |
| 1 | 0u01 +200V | complib:C_0603 | C12 |
| 1 | 10R | complib:R_0603 | R5 |
| 1 | 12K4 | complib:R_0603 | R16 |
| 1 | 22n | complib:C_0603 | C8 |
| 1 | 4K7 | complib:R_0603 | R2 |
| 1 | 4u7 | complib:C_0603 | C10 |
| 1 | CONN_ALT_HEADER | complib:CONN_ALT_HEADER_th | J2 |
| 1 | CRYSTAL_4PIN | FE Footprints:Xtal_5x3.2 | X1 |
| 1 | C_GND | complib:2.8mm_Spade_terminal | J3 |
| 1 | RJ45+MAG | complib:RJ45+MAG | J1 |
| 1 | W5500 | complib:LQFP-48_7x7mm_Pitch0.5mm | U1 |

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

tombueng/LuxDMX
Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.


OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.

CappyT/freedo
Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on

Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

slintak/NPR70
The New Packet Radio on 70 cm band. Based on the project NPR from F4HDK.

festlv/rioctrl-hw
Hardware design for modular CNC controller
It measures 37.4 × 33.8 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the W5500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Duet3D/Duet-2-Hardware repository on GitHub, at the commit this page was made from: the board is Ethernet_Module/EthernetModule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Duet3D before reusing the design.