2 layers70 × 70 mm
2 layers70 × 100 mm
Combined
DrGlaucous/FightingRobotUse RFM69 to transmit PPM cheaply
- Size
- 70 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 52
- Pads
- 183
- Tracks, vias
- 211, 1
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jan 2024
- Updated
- 6 May 2026
Overview
Combined is an open-source printed circuit board by DrGlaucous, from the DrGlaucous/FightingRobot repository on GitHub. It is a 2-layer board of 70 × 100 mm with 24 parts on 52 nets, routed with 211 tracks and 1 via.
It is built around the RFM69HW. Its parts include 9 ICs, 9 connectors, 2 resistors, 2 fuses and 1 diode. It belongs with the ESP32 boards of this library.
Main components
1Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Fuse 15A | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | F1, F2 |
| 2 | Mini360 | My_Library:Mini360 | U1, U6 |
| 2 | RFM69HW | My_Library:HOPERF_RFM69HW | U2, U4 |
| 2 | Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5, J6 |
| 2 | ~ | My_Library:HW-627 | U2, U3 |
| 1 | 10k Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 150k Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | BATT_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | BP | My_Library:blue_pill | U3 |
| 1 | ESC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | ESC_PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | ESP32-LOLIN32-Lite | Espressif:ESP32-LOLIN32-Lite | U1 |
| 1 | MAIN_CUTOFF | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | Motor_A | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Motor_B | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Motor_C | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Remote Umbilical | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | XL60019_Boost_Module | My_Library:XL60019 Boost Module | U5 |
Questions
How big is the Combined PCB?
It measures 70 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Combined use?
24 parts, built around the RFM69HW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Combined KiCad files?
From the DrGlaucous/FightingRobot repository on GitHub, at the commit this page was made from: the board is RB1/Schematic/Combined/Mainboard.kicad_pcb and its schematic CommonFirmware/RetroTransmitterConversion/Schematic/Schematic/Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Combined design in my own project?
Its repository states no licence, so its author keeps all rights: ask DrGlaucous before reusing the design.
More from DrGlaucous/FightingRobot
4- 2 layers
- 2 layers
- 2 layers70 × 30 mm
Similar boards
- 2 layers65 × 31 mm
- 2 layers35.6 × 20.3 mm
- 2 layers25.4 × 25.4 mm
- 2 layers65 × 30 mm
MySensorsPiGw
llegoff/MySensorsPiGw
MySensors RFM69 & NRF24L Gateway for Raspberry Pi (zero & B)
29 parts8 - 2 layers50 × 50 mm
- 2 layers100 × 100 mm
- 2 layers55 × 35 mm
Mini BT Pcb-328P
d-diot/Mini-BT-Pcb-328P
MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb
54 parts3 - 2 layers48 × 35 mm
Pax BB5
CalinRadoni/pax-BB5
STM32L051K8T BaseBoard with RFM69HW and external Flash memory with support for PlatformIO
27 parts2GPL-3.0