2 layers65 × 31 mm

Diy tracker

Do-it-Yourself OGN Tracker software

Size: 65 × 31 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 27
Nets: 45
Pads: 119
Tracks, vias: 581, 0
Routed: Yes
KiCad: KiCad 4
Created: 23 Mar 2015
Updated: 8 Nov 2018

Overview

Diy tracker is an open-source printed circuit board by glidernet, from the glidernet/diy-tracker repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 31 mm with 27 parts on 45 nets, routed with 581 tracks and 0 vias.

It is built around the BMP180 and RFM69HW. It belongs with the STM32 boards of this library.

Main components

README

README.md

diy-tracker

Do-it-Yourself OGN Tracker software

Parts

Qty	Value	Footprint	References
7	100nF	smd_capacitors:c_1206	Cpot1, Csup1, Csup2, Csup3, Csup4, Csup5, Csup6
5	CONN_1	connect:1pin	ANT2, GND1, GND2, GND3, GND4
2	10K	smd_capacitors:c_1206	Rscl1, Rsda1
2	CONS/BT	connect:SIL-4	CON1, CON3
1	3.3/GND/5V	connect:SIL-4	SUP1
1	500	smd_capacitors:c_1206	Rled1
1	BMP180	connect:SIL-4	BARO1
1	BUZZER	connect:SIL-2	SP1
1	CTRL	connect:SIL-3	POT1
1	LED	connect:SIL-2	Dstat1
1	RFM69HW	RFM69HW:RFM69HW	RF1
1	SMA	connect:SIL-2	ANT1
1	STM32F103C8T6_board	dip_sockets:DIP-40__600_ELL	CPU1
1	VK16U6	connect:SIL-6	GPS1
1	microSD	connect:SIL-7	SD1

Questions

How big is the Diy tracker PCB?

It measures 65 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Diy tracker use?

27 parts, built around the BMP180 and RFM69HW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Diy tracker KiCad files?

From the glidernet/diy-tracker repository on GitHub, at the commit this page was made from: the board is PCB/DIY-Tracker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Diy tracker design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

Category and platform

STM32

Project files

Show this board on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/boards/glidernet-diy-tracker" title="Diy tracker in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/boards/glidernet-diy-tracker.jpg" alt="Diy tracker" width="1200" height="900">

A picture that opens the board, for a README

[![Diy tracker](https://pcbkit.io/embed/boards/glidernet-diy-tracker.jpg?size=s)](https://pcbkit.io/boards/glidernet-diy-tracker)

Source

Repository: glidernet/diy-tracker
Board file: PCB/DIY-Tracker.kicad_pcb
Commit: fb53bf6
Licence: GPL-3.0

Similar boards

2 layers35.6 × 20.3 mm
STM32 Sensor
freynder/STM32_Sensor
Tiny STM32 board with RFM69 support
27 parts12
2 layers25.4 × 25.4 mm
RFM69BreakoutBoard
BitKnitting/RFM69BreakoutBoard

15 parts9
2 layers65 × 30 mm
MySensorsPiGw
llegoff/MySensorsPiGw
MySensors RFM69 & NRF24L Gateway for Raspberry Pi (zero & B)
29 parts8
2 layers50 × 50 mm
MysensorsGW
mysensors/SensebenderGW
Gateway for MySensors
76 parts7
2 layers100 × 100 mm
MySensors 8Dimmers
LudovicLemarinel/KicadDomo

68 parts4
2 layers55 × 35 mm
Mini BT Pcb-328P
d-diot/Mini-BT-Pcb-328P
MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb
54 parts3
2 layers48 × 35 mm
Pax BB5
CalinRadoni/pax-BB5
STM32L051K8T BaseBoard with RFM69HW and external Flash memory with support for PlatformIO
27 parts2GPL-3.0
2 layers69.6 × 80.5 mm
ProtoBoard
dustinreynolds/STM32Hardware
Repository for Kicad board development and support libraries
158 parts2