Skip to the content
2 layers70 × 30 mmTransmitter, the printed circuit board in 3D

Use RFM69 to transmit PPM cheaply

Size
70 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
48
Pads
78
Tracks, vias
60, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
23 Jan 2024
Updated
6 May 2026

Overview

Transmitter is an open-source printed circuit board by DrGlaucous, from the DrGlaucous/FightingRobot repository on GitHub. It is a 2-layer board of 70 × 30 mm with 4 parts on 48 nets, routed with 60 tracks and 0 vias.

It is built around the RFM69HW. Its parts include 3 ICs and 1 connector.

Main components

1

Parts

4
QtyValueFootprintReferences
1BPMy_Library:blue_pillU3
1Mini360My_Library:Mini360U1
1RFM69HWMy_Library:HOPERF_RFM69HWU2
1Remote UmbilicalConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2

More from DrGlaucous/FightingRobot

4
  • 2 layers70 × 100 mmCombined, the printed circuit board in 3D

    Combined

    DrGlaucous/FightingRobot

    Use RFM69 to transmit PPM cheaply

    24 parts
  • 2 layers70 × 70 mmRB1, the printed circuit board in 3D

    RB1

    DrGlaucous/FightingRobot

    Use RFM69 to transmit PPM cheaply

    20 parts
  • 2 layersMainboard STM OLD, the printed circuit board in 3D

    Mainboard STM OLD

    DrGlaucous/FightingRobot

    Use RFM69 to transmit PPM cheaply

    15 parts
  • 2 layersRB3, the printed circuit board in 3D

    RB3

    DrGlaucous/FightingRobot

    Use RFM69 to transmit PPM cheaply

    9 parts

Similar boards

  • 2 layers65 × 31 mmDiy tracker, the printed circuit board in 3D

    Diy tracker

    glidernet/diy-tracker

    Do-it-Yourself OGN Tracker software

    27 parts30GPL-3.0
  • 2 layers35.6 × 20.3 mmSTM32 Sensor, the printed circuit board in 3D

    STM32 Sensor

    freynder/STM32_Sensor

    Tiny STM32 board with RFM69 support

    27 parts12
  • 2 layers65 × 30 mmMySensorsPiGw, the printed circuit board in 3D

    MySensorsPiGw

    llegoff/MySensorsPiGw

    MySensors RFM69 & NRF24L Gateway for Raspberry Pi (zero & B)

    29 parts8
  • 2 layers50 × 50 mmMysensorsGW, the printed circuit board in 3D

    MysensorsGW

    mysensors/SensebenderGW

    Gateway for MySensors

    76 parts7
  • 2 layers55 × 35 mmMini BT Pcb-328P, the printed circuit board in 3D

    Mini BT Pcb-328P

    d-diot/Mini-BT-Pcb-328P

    MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb

    54 parts3
  • 2 layers48 × 35 mmPax BB5, the printed circuit board in 3D

    Pax BB5

    CalinRadoni/pax-BB5

    STM32L051K8T BaseBoard with RFM69HW and external Flash memory with support for PlatformIO

    27 parts2GPL-3.0

Questions

How big is the Transmitter PCB?

It measures 70 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Transmitter use?

4 parts, built around the RFM69HW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Transmitter KiCad files?

From the DrGlaucous/FightingRobot repository on GitHub, at the commit this page was made from: the board is RB1/Schematic/Transmitter/Transmitter.kicad_pcb and its schematic CommonFirmware/RetroTransmitterConversion/Schematic/Schematic/Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Transmitter design in my own project?

Its repository states no licence, so its author keeps all rights: ask DrGlaucous before reusing the design.