Skip to the content
2 layers31.8 × 11.4 mmMMCBreakOut, the printed circuit board in 3D
Size
31.8 × 11.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
7
Pads
30
Tracks, vias
54, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
25 Aug 2022
Updated
13 Dec 2022

Overview

MMCBreakOut is an open-source printed circuit board by drebarrera, from the drebarrera/Repeat-Rover repository on GitHub. It is a 2-layer board of 31.8 × 11.4 mm with 7 parts on 7 nets, routed with 54 tracks and 0 vias.

It is built around the MMC5983MA. Its parts include 2 capacitors, 2 resistors and 2 connectors.

Main components

1

README

README.md

Repeat-Rover

Parts

7
QtyValueFootprintReferences
22.7kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2_Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J2
110uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
11uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
1MMC5983MAPQFN50P300X300X100-16NMAG1

More from drebarrera/Repeat-Rover

1

Similar boards

  • 4 layers33 × 90 mmActive drag system, the printed circuit board in 3D

    Active drag system

    RocketryVT/active-drag-system

    Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.

    100 parts6MIT
  • 4 layers70.8 × 100 mmFlapjack, the printed circuit board in 3D

    Flapjack

    Caleb646/Flapjack

    A custom VTOL drone platform — from airframe to PCB to firmware.

    116 parts4
  • 4 layers47 × 21.6 mmRotini Hardware, the printed circuit board in 3D

    Rotini Hardware

    AlfredoSystems/Rotini-Hardware

    📖 Documentation: https://www.alfredosys.com/Rotini-Hardware/ (pinout, power limits, flashing ExpressLRS, first Arduino upload)

    116 parts3MIT
  • 4 layers31 × 100 mmKp ptr, the printed circuit board in 3D

    Kp ptr

    PTR-projects/PTR_mega_hardware

    Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.

    208 parts3MIT
  • 2 layers120 × 80 mmMainBoard v1, the printed circuit board in 3D

    MainBoard v1

    shimotoriharuki/2021RoboTrace_Kicad

    This repository contains circuit data for line-following robot (UnderBird).

    166 parts3GPL-3.0
  • 6 layers90 × 45 mmHw tele stern, the printed circuit board in 3D

    Hw tele stern

    shorlee/TeleSTERN

    The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.

    303 parts3GPL-3.0
  • 4 layers50 × 100 mmStDevboard, the printed circuit board in 3D

    StDevboard

    teletype7/IRIS

    166 parts3MIT

Questions

How big is the MMCBreakOut PCB?

It measures 31.8 × 11.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MMCBreakOut use?

7 parts, built around the MMC5983MA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MMCBreakOut KiCad files?

From the drebarrera/Repeat-Rover repository on GitHub, at the commit this page was made from: the board is pcb/RepeatRoverV2.0/MMCBreakOut/MMCBreakOut.kicad_pcb and its schematic pcb/RepeatRoverV2.0/RepeatRover.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MMCBreakOut design in my own project?

Its repository states no licence, so its author keeps all rights: ask drebarrera before reusing the design.