2 layers31.8 × 11.4 mm
2 layers
RepeatRover
drebarrera/Repeat-Rover- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 63
- Pads
- 146
- Tracks, vias
- 234, 28
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Aug 2022
- Updated
- 13 Dec 2022
Overview
RepeatRover is an open-source printed circuit board by drebarrera, from the drebarrera/Repeat-Rover repository on GitHub. It is a 2-layer board with 31 parts on 63 nets, routed with 234 tracks and 28 vias.
It is built around the MDBT42Q-512KV2 and MMC5983MA. Its parts include 7 capacitors, 5 connectors, 2 resistors and 1 crystal. It belongs with the nRF52 and nRF5x boards of this library.
Main components
2README
README.mdRepeat-Rover
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C_RST1, C10, C11 |
| 2 | .1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 2 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C16 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_5x5.7 | CVIN1, CVOUT1 |
| 2 | 12pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 2.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1_1, J2_1 |
| 2 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3_1, J4_1 |
| 1 | 104031-0811 | 104031-0811:MOLEX_104031-0811 | SD_SLOT1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_RST1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 32MHz | Hall Effect Footprint:OSC_XRCGB32M000FXH2CR0 | X1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J5 |
| 1 | MDBT42Q-512KV2 | MDBT42Q-512KV2:RAYTAC_MDBT42Q-512KV2 | E1 |
| 1 | MMC5983MA | MMC5983MA:PQFN50P300X300X100-16N | MAG1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | LDO1 |
| 1 | YX1818BM | Package_SO:SOP-16_4.55x10.3mm_P1.27mm | U_HB1 |
| 1 | _ | Button_Switch_THT:SW_PUSH_6mm | SW_RST1 |
More from drebarrera/Repeat-Rover
1Similar boards
- 2 layers85 × 40 mm
Ble beacon
Shwetha-org/BLE-Garment-Monitoring-System
BLE Garment Monitoring System is a research prototype that uses a custom BLE tag, a Raspberry Pi room scanner, and a mobile app to detect simple garment usage states (stored, worn, wet) and summarize wears and washes.
19 parts1 - 4 layers30 × 40 mm
- 4 layers66 × 42 mm
- 4 layers
Carbentra presence sensor
hicancan/carbentra-presence-sensor
CARBENTRA Sense B: wired radar presence sensor, native hardware and authenticated firmware
35 partsAGPL-3.0 - 2 layers40.7 × 52.1 mm
Probe
JamieG/temp-sensor
A wireless temperature monitoring system: small battery-powered probes broadcast temperature, humidity, and battery level over BLE, and a Wi-Fi-connected hub collects those readings and uploads them to a webhook.
11 parts - 2 layers60.1 × 60 mm
Adhdv1.00
Maxwell-Khor/adhd-medication-reminder
Custom embedded medication reminder device with PCB design and firmware development for improving medication adherence
82 parts - 4 layers110 × 30.5 mm
- 2 layers74.5 × 34.5 mm
Bledstripper
reelyactive/bledstripper-grove
Bluetooth Low Energy LED strip controller circuit board with standard Grove connectors. We believe in an open Internet of Things.
30 partsMIT
Questions
What parts does the RepeatRover use?
31 parts, built around the MDBT42Q-512KV2 and MMC5983MA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RepeatRover KiCad files?
From the drebarrera/Repeat-Rover repository on GitHub, at the commit this page was made from: the board is pcb/RepeatRoverV3.0/RepeatRover.kicad_pcb and its schematic pcb/RepeatRoverV2.0/RepeatRover.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RepeatRover design in my own project?
Its repository states no licence, so its author keeps all rights: ask drebarrera before reusing the design.