DPIclimate/kangaroo-nodeEnviro-Node About • Install • Firmware • License
Kangaroo is an open-source printed circuit board by DPIclimate, from the DPIclimate/kangaroo-node repository on GitHub, published under the MIT licence. It is a 2-layer board of 74.1 × 112 mm with 29 parts on 37 nets, routed with 172 tracks and 53 vias.
It is built around the MIC2288YD5-TR, TBP02R2-381-03BE and TBP02R2-381-04BE, with the AOD417, LQH43CN100K03L and PTS636 SM43J SMTR LFS among its other parts. Its parts include 8 resistors, 8 connectors, 2 capacitors, 2 diodes and 1 IC.
About • Install • Firmware • License
TODO
This project uses PlatformIO as a build system. Instructions for building the project are below.
Clone this project in your desired directory.
git clone https://github.com/DPIclimate/enviro-nodeThis project is MIT licensed, as found in the LICENCE file.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7K | Resistor_SMD:R_0805_2012Metric | R3, R5, R6 |
| 2 | TBP02R2-381-03BE | TBP02R2-381-03BE:CUI_TBP02R2-381-03BE | J7, J8 |
| 2 | TBP02R2-381-04BE | TBP02R2-381-04BE:CUI_TBP02R2-381-04BE | J2, J5 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 320 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 43.3K | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 5K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | AOD417 | AOD417:DPAK228P994X240_3N | Q1 |
| 1 | Adafruit_Feather_M0_RFM9x_LoRa_Radio | Module:Adafruit_Feather_M0_RFM | A1 |
| 1 | BHDL | BHDL:BHDL | BT1 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LQH43CN100K03L | LQH43CN100K03L:IND_LQH43CN100K03L | L1 |
| 1 | MIC2288YD5-TR | MIC2288YD5-TR:SOT95P280X100-5N | U1 |
| 1 | PTS636_SM43J_SMTR_LFS | PTS636_SM43J_SMTR_LFS:SW_PTS636_SM43J_SMTR_LFS | S1 |
| 1 | SS34LW_RVG | SS34LW_RVG:SODFL3718X102N | D2 |
| 1 | ST1W008S4AR1500 | ST1W008S4AR1500:JAE_ST1W008S4AR1500 | J3 |
| 1 | SWCLK | TestPoint:TestPoint_Pad_D2.0mm | SWCLK |
| 1 | SWDIO | TestPoint:TestPoint_Pad_D2.0mm | SWDIO |
| 1 | TBP02R2-381-02BE | TBP02R2-381-02BE:CUI_TBP02R2-381-02BE | J1 |
It measures 74.1 × 112 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the MIC2288YD5-TR, TBP02R2-381-03BE, TBP02R2-381-04BE and AOD417. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DPIclimate/kangaroo-node repository on GitHub, at the commit this page was made from: the board is electronics/kangaroo.kicad_pcb and its schematic electronics/kangaroo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
ionutms/Modular_Software_Configurable_IO_PLC
This repository contains a modular KiCad design project for a Software Configurable I/O PLC. The project integrates several advanced components to create a versatile and powerful industrial control solution.
DPIclimate/ag-node
Automatic multi-weigh-station for measuring the live-weight of sheep in remote locations.
LouisVizard/NavBoard
A full navigation solution featuring MCU, GNSS receiver, RF transceiver, and 9-DOF IMU
HarveyBates/Open-JIP
An open-source Arduino based chlorophyll fluorometer for quantifying photosynthesis in photosynthetic organisms.
c-klinger/AskSinPP-PCB
Collection of my PCBs for building custom Homematic devices using AskSin++