dovy6/FaikedThis project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
Faikout is an open-source printed circuit board by dovy6, from the dovy6/Faiked repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70 × 70 mm with 47 parts on 44 nets, routed with 257 tracks and 98 vias.
It is built around the ESP32-S3-MINI-1-N4R2, TPS562246DRL and GRM033R61A104KE15, with the 0402B104K250NT, RC0201FR-10KL and RC-01W1503FT among its other parts. Its parts include 12 capacitors, 6 resistors, 4 diodes, 3 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered trademark AJK logo or other registered trademarks, or any GS1 allocated EANs/barcode assigned to Andrews & Arnold Ltd.
These files are for use with KiCAD.
3D case designs are normally automatically created from the PCB so as to ensure correct details and placement of apertures, etc.
| Design | Bottom | Top | Combined |
|---|---|---|---|
| Faikout |  |  |  |
Auto generated README.md 2026-06-15T07:23:17
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | TestPoint | RevK:PAD-2mm | TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 6 | 100nF | RevK:C_0201 | C1, C2, C4, C5, C7, C18 |
| 6 | ~ | RevK:VCUT70N | V1, V2, V3, V4, V5, V6 |
| 2 | 100nF 25V | RevK:C_0402 | C3, C16 |
| 2 | 10k | RevK:R_0201 | R1, R2 |
| 2 | 150k 1% | RevK:R_0201 | R5, R6 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID2, FID3 |
| 2 | ~ | RevK:DFN1006-2L | D2, D3 |
| 1 | 10K | RevK:R_0201 | R3 |
| 1 | 18pF | RevK:C_0201 | C19 |
| 1 | 1uF | RevK:C_0201 | C6 |
| 1 | 22uF 25V | RevK:C_0805 | C17 |
| 1 | 33k 1% | RevK:R_0201 | R8 |
| 1 | 4.7uH | RevK:L_5x5 | L1 |
| 1 | 47uF 6V3 | RevK:C_0805 | C15 |
| 1 | 70x70 | RevK:PCB7070 | PCB1 |
| 1 | BSS138PS | RevK:SOT-363_SC-70-6 | Q1 |
| 1 | D | RevK:D_0402 | D4 |
| 1 | ESP32-S3-MINI-1 | RevK:ESP32-S3-MINI-1 | U4 |
| 1 | Reset | RevK:AA-Pad | J3 |
| 1 | S21 | RevK:JST_EH_S5B-EH_1x05_P2.50mm_Horizontal | J1 |
| 1 | TC2030-USB-NL | RevK:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | TPS562246 | RevK:SOT-5x3-6 | U1 |
| 1 | XL-1615RGBC-2812B | RevK:SMD1615 | D1 |
It measures 70 × 70 mm and has 2 copper layers, 1.2 mm thick.
47 parts, built around the ESP32-S3-MINI-1-N4R2, TPS562246DRL, GRM033R61A104KE15 and 0402B104K250NT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dovy6/Faiked repository on GitHub, at the commit this page was made from: the board is PCB/Faikout/Faikout.kicad_pcb and its schematic PCB/Faikout/Faikout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
dovy6/Faiked
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
Rsa76d/FaikoutRSA
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
Yang-xy-svg/ESP_OpenMic
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
Phiumi/ESP32-Faikout-CostOptimize
This is a cost optimize version of the original repo by RevK
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
