

Coaster
A Stargate thing...
- Size
- 120 × 120 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 282
- Nets
- 175
- Pads
- 944
- Tracks, vias
- 431, 273
- Pours
- 34
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Aug 2024
- Updated
- 19 Dec 2025
Overview
Coaster is an open-source printed circuit board by evansj, from the evansj/ESP32-LED repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 120 × 120 mm with 282 parts on 175 nets, routed with 431 tracks and 273 vias.
It is built around the ESP32-S3-MINI-1-N4R2, TPS562246DRL and ICS-43434, with the GRM033R61A104KE15, XL-1615RGBC-2812B and 0402B104K250NT among its other parts. Its parts include 138 capacitors, 124 diodes, 6 resistors, 5 connectors and 3 ICs. It belongs with the ESP32 boards of this library.
Main components
12ESP32-S3-MINI-1-N4R2
SMD-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi ModulesTPS562246DRL
SOT-5x3-6-40℃~+125℃@(TJ) 1.28MHz 2A 350uA 4.2V~17V 600mV~7V Adjustable Buck Buck Built-in Yes SOT-5x3-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersICS-43434
LGA-6(3.5x2.7)-26dB -40℃~+85℃ 0.98mm 1.65V~3.63V 2.65mm 3.5mm 550uA 64dB I2S Omnidirectional Omnidirectional pickup LGA-6(3.5x2.7) MEMS Microphones ROHSTDK InvenSenseMEMS MicrophonesGRM033R61A104KE15
0201100nF 10V X5R ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMTXL-1615RGBC-2812B
SMD-4P,1.6x1.5mm-20℃~+85℃ 0.35mA 0.6mm 1.5mm 1.6mm 120° 130mcd、360mcd、110mcd 3.5V~5.5V 3000V 4.5kHz 800Kbit/s G:525nm、R:625nm、B:470nm R:620nm~625nm、B:465nm~470nm、G:525nm~530nm Top-mount Water Clear SMD-4P,1.6x1.5mm RGB LEDs(Built-in IC) ROHSXINGLIGHTRGB LEDs(Built-In IC)0402B104K250NT
0402100nF 25V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMTGRM188R6YA106MA73
060310uF 35V X5R ±20% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMTRC-01W1503FT
0201-55℃~+125℃ 150kΩ 25V 50mW Thick Film Resistor ±1% ±200ppm/℃ 0201 Chip Resistor - Surface Mount ROHSGuangdong Fenghua Advanced Tech (FH)Chip Resistor - Surface Mount2060-452/998-404
SMD,P=4mm-60℃~+105℃ 1 18~24 1x2P 2 2P 320V 4mm 9A White SMD,P=4mm Spring Clamp System Terminal Block ROHSWAGOSpring Clamp System Terminal Block0201CG180J500NT
020118pF 50V C0G ±5% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMTCA45-B6R3K227T
CASE-B-3528-19(mm)-55℃~+125℃ 1.2Ω@100kHz 220uF 6.3V ±10% CASE-B-3528-19(mm) Tantalum Capacitors ROHSHunan Xiangyee in S&TTantalum CapacitorsCL21A226MAQNNNE
080522uF 25V X5R ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
PCB/5x7/README.md5x7
These files are for use in KiCad.
Trademark
This is an open source project, but bear in mind you cannot sell boards bearing the Andrews & Arnold Ltd name, the A&A logo, the registered trademark AJK logo, or the GS1 allocated EANs assigned to Andrews & Arnold Ltd.
Images



Auto generated 2025-08-12T11:30:27
Parts
282| Qty | Value | Footprint | References |
|---|---|---|---|
| 129 | 100nF | RevK:C_0201 | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +113 |
| 124 | XL-1010RGBC-WS2812B | RevK:SMD1615 | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +108 |
| 4 | ~ | RevK:VCUT120N | V1, V2, V3, V4 |
| 2 | 100nF 25V | RevK:C_0402 | C134, C135 |
| 2 | 10uF 35V | RevK:C_0603 | C129, C131 |
| 2 | 150k 1% | RevK:R_0201 | R4, R5 |
| 2 | 5K1 | RevK:R_0201 | R2, R3 |
| 2 | DC | RevK:WAGO-2060-452-998-404 | J2, J3 |
| 1 | 10K | RevK:R_0201 | R1 |
| 1 | 120x120 | RevK:PCB120120 | PCB1 |
| 1 | 18pF | RevK:C_0201 | C137 |
| 1 | 1uF | RevK:C_0201 | C130 |
| 1 | 220uF Tant | RevK:CP_EIA-3528-21_Kemet-B | C127 |
| 1 | 22uF 25V | RevK:C_0805 | C133 |
| 1 | 33k 1% | RevK:R_0201 | R6 |
| 1 | 4.7uH | RevK:L_5x5 | L1 |
| 1 | 47uF 6V | RevK:C_0805 | C138 |
| 1 | ESP32-S3-MINI-1 | RevK:ESP32-S3-MINI-1 | U2 |
| 1 | ICS43434_MEMS_Mic | RevK:ICS43434_MEMS_Mic | U1 |
| 1 | Reset | RevK:AA-Pad | J1 |
| 1 | TC2030-USB-NL-DS | RevK:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J4 |
| 1 | TPS562246 | RevK:SOT-563 | U3 |
| 1 | USB-C-Socket-H | RevK:USB-C-Socket-H | J5 |
More from evansj/ESP32-LED
12- 2 layers137 × 148.9 mm

- 2 layers76.2 × 22.9 mm

- 2 layers

- 2 layers

- 2 layers120 × 120 mm

- 2 layers120 × 120 mm

- 2 layers

- 2 layers

- 11 layers198 × 98 mm

- 2 layers10 × 18 mm

- 2 layers70 × 70 mm

- 2 layers70 × 70 mm

Similar boards
- 2 layers70 × 70 mm

Faikout
dovy6/Faiked
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
47 partsGPL-3.0 - 2 layers70 × 70 mm

Access
sijinhui/SolarSystem
Fork of codeberg.org/RevK/SolarSystem — adds ESP32-S3 N16R8 (octal PSRAM) build variant (branch n16r8-octal-psram)
83 partsGPL-3.0 - 2 layers70 × 70 mm

- 4 layers43 × 62 mm

- 2 layers70 × 70 mm

Recorder
Yang-xy-svg/ESP_OpenMic
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
71 partsGPL-3.0 - 6 layers17.8 × 35.8 mm

Rp2350 fpga eensy prePlane
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
61 parts744MIT - 4 layers163.3 × 100 mm

HF phase detector
KLFAMO/phase_detector_Artiq
This is a phase detector designed to measure phase differences for input frequencies ranging from 0 to approximately 200 MHz. The device includes configurable frequency dividers for each input channel.
461 parts - 4 layers20 × 30 mm

Questions
How big is the Coaster PCB?
It measures 120 × 120 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Coaster use?
282 parts, built around the ESP32-S3-MINI-1-N4R2, TPS562246DRL, ICS-43434 and GRM033R61A104KE15. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Coaster KiCad files?
From the evansj/ESP32-LED repository on GitHub, at the commit this page was made from: the board is PCB/Coaster3/Coaster.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Coaster design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).