

Esp32 rio
A low-cost industrial remote input/output device based on the ESP32-S3 SoC from Espressif
- Size
- 100 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 224
- Nets
- 183
- Pads
- 678
- Tracks, vias
- 1,013, 478
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 May 2025
- Updated
- 9 Jun 2025
Overview
Esp32 rio is an open-source printed circuit board by dougsthenri, from the dougsthenri/esp32_rio repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 85 mm with 224 parts on 183 nets, routed with 1,013 tracks and 478 vias.
It is built around the ESP32-S3-WROOM-1U-N4, LM2596S-3.3 and TLV3202AID, with the TL431, BSS138 and IRLML6344 among its other parts. Its parts include 108 resistors, 51 transistors, 32 diodes, 11 capacitors and 8 ICs. It belongs with the ESP32 boards of this library.
Main components
7ESP32-S3-WROOM-1U-N4
SMD,19.2x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 UART、SPI、I2C、I2S、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLM2596S-3.3
TO-263-5L-20℃~+70℃ 1 170kHz 2mA 3.3V 3A 4.5V~40V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHSGRDC-DC ConvertersTLV3202AID
SOIC-8-2.75V~-1.35V、1.35V~2.75V -40℃~+125℃ 1.2mV 10uV/℃ 1mV 2 2.7V~5.5V 40ns 40uA 5.5V 50pA 50pA 70dB CMOS Enable/shutdown function、Overvoltage protection Push-pull Rail-to-rail input SOIC-8 Comparators ROHSTexas InstrumentsComparatorsTL431
SOT-23-20℃~+85℃ 150mA 1mA 2.5V~36V 50ppm/℃ Adjustable Parallel Temperature compensation control ±1% SOT-23 Voltage Reference ROHSGuangdong HottechVoltage ReferenceBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsIRLML6344
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC@4.5V 650pF SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsSS26T3G
DO-214AA-55℃~+150℃ 1 Independent 200uA@60V 2A 40A 510mV 60V DO-214AA Schottky Diodes ROHSTokmasSchottky Diodes
README
hardware/board/README.mdesp32_rio
PCB project for a low-cost industrial remote I/O device based on the ESP32-S3 SoC from Espressif. Proudly made using KiCad 9.0.

For any issues or contributions, please refer to the project's GitHub repository.
Parts
224| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | 1M | esp32_rio-footprints:R_0603_1608Metric | R201, R202, R203, R204, R205, R206, R207, R208, R209, R210, R211, R212, R213, R214, R215, R216 +24 |
| 31 | 68 | esp32_rio-footprints:R_0603_1608Metric | R105, R272, R273, R274, R275, R276, R277, R278, R279, R280, R281, R301, R302, R303, R304, R305 +15 |
| 31 | BSS138 | esp32_rio-footprints:SOT-23 | Q101, Q201, Q202, Q203, Q204, Q205, Q206, Q207, Q208, Q209, Q210, Q321, Q322, Q323, Q324, Q325 +15 |
| 30 | Green | esp32_rio-footprints:LED_D3.0mm | D201, D202, D203, D204, D205, D206, D207, D208, D209, D210, D301, D302, D303, D304, D305, D306 +14 |
| 20 | IRLML6344 | esp32_rio-footprints:SOT-23 | Q301, Q302, Q303, Q304, Q305, Q306, Q307, Q308, Q309, Q310, Q311, Q312, Q313, Q314, Q315, Q316 +4 |
| 13 | 10k | esp32_rio-footprints:R_0603_1608Metric | R101, R102, R103, R225, R226, R227, R228, R229, R230, R231, R232, R257, R258 |
| 10 | 1.2k | esp32_rio-footprints:R_0603_1608Metric | R221, R222, R223, R224, R233, R234, R235, R236, R259, R260 |
| 10 | 649k | esp32_rio-footprints:R_0603_1608Metric | R217, R218, R219, R220, R237, R238, R239, R240, R261, R262 |
| 6 | 100n | esp32_rio-footprints:C_0603_1608Metric | C105, C201, C202, C203, C204, C205 |
| 5 | TLV3202AID | esp32_rio-footprints:SOIC-8_3.9x4.9mm_P1.27mm | U201, U202, U203, U204, U205 |
| 4 | MountingHole | esp32_rio-footprints:MountingHole_2.1mm | H101, H102, H103, H104 |
| 2 | 5.1k | esp32_rio-footprints:R_0603_1608Metric | R106, R107 |
| 1 | 100 | esp32_rio-footprints:R_0603_1608Metric | R104 |
| 1 | 100µ | esp32_rio-footprints:C_Elec_10x10.2 | C101 |
| 1 | 10µ | esp32_rio-footprints:C_0805_2012Metric | C206 |
| 1 | 1µ | esp32_rio-footprints:C_0603_1608Metric | C102 |
| 1 | 22µ | esp32_rio-footprints:C_0805_2012Metric | C104 |
| 1 | 24V_Power | esp32_rio-footprints:Kefa_KF142V-5.08-4P | J101 |
| 1 | 330 | esp32_rio-footprints:R_0603_1608Metric | R266 |
| 1 | 680µ | esp32_rio-footprints:C_Elec_10x10.2 | C103 |
| 1 | 68µ | esp32_rio-footprints:L_Vishay_IHLP-6767 | L101 |
| 1 | Digital_Input | esp32_rio-footprints:Kefa_KF142V-5.08-10P | J201 |
| 1 | Digital_Output_Bank_0 | esp32_rio-footprints:Kefa_KF142V-5.08-10P | J301 |
| 1 | Digital_Output_Bank_1 | esp32_rio-footprints:Kefa_KF142V-5.08-10P | J302 |
| 1 | ESP32-S3-WROOM-1U | esp32_rio-footprints:ESP32-S3-WROOM-1U | U102 |
| 1 | External_Programmer | esp32_rio-footprints:PinHeader_2x03_P2.54mm_Vertical | J103 |
| 1 | LM2596S-3.3 | esp32_rio-footprints:TO-263-5_TabPin3 | U101 |
| 1 | Programming_Port | esp32_rio-footprints:CUI_UJ20-C-V-C-3-SMT-TR | J104 |
| 1 | Red | esp32_rio-footprints:LED_Rectangular_W5.0mm_H2.0mm | D102 |
| 1 | Reset | esp32_rio-footprints:SW_SPST_PTS645 | SW101 |
| 1 | SS26T3G | esp32_rio-footprints:D_SMB | D101 |
| 1 | Signature | esp32_rio-footprints:Signature_7.8x9mm | G*** |
| 1 | TL431 | esp32_rio-footprints:SOT-23 | U206 |
| 1 | Toggle_Outputs | esp32_rio-footprints:SW_SPST_PTS645 | SW102 |
Similar boards
- 2 layers78.7 × 106 mm

- 2 layers70 × 76 mm

- 4 layers50.8 × 25.4 mm

- 6 layers159.3 × 60.8 mm

Combolite2
ekundo/combolite
ComboLite: плата расширения для «Вектора-06Ц» — квазидиски, IDE, дисковод, AY, VGA, Wi-Fi
187 parts2GPL-3.0 - 4 layers65 × 95 mm

Gse control node
Queens-Rocket-Engineering-Team/gse-control-node
The GSE control node is the control PCB for GSE systems to integrate with launch control. This includes actuator control, fan control, and a load cell reading.
193 parts - 4 layers112 × 57 mm

- 2 layers92.9 × 54.5 mm

- 4 layers50 × 111 mm

Questions
How big is the Esp32 rio PCB?
It measures 100 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32 rio use?
224 parts, built around the ESP32-S3-WROOM-1U-N4, LM2596S-3.3, TLV3202AID and TL431. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 rio KiCad files?
From the dougsthenri/esp32_rio repository on GitHub, at the commit this page was made from: the board is hardware/board/esp32_rio.kicad_pcb and its schematic hardware/board/digital_inputs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 rio design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).