
ESP32Anglerfish
Matchboxscope/Matchboxscope
ESP32-based mini microscope for fluidic device observation

Linear power supply, with digital control
Power board is an open-source printed circuit board by Dominik-Workshop, from the Dominik-Workshop/dw3005t repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 79 mm with 23 parts on 17 nets, routed with 85 tracks and 0 vias.
It is built around the MBR3045CT, BD139 and BYG22B. Its parts include 6 diodes, 4 transistors, 3 connectors, 2 capacitors and 2 resistors. It belongs with the power boards of this library.
This is the second iteration of my linear power supply project available on GitHub, building upon the foundation of my original design. While the first version served as an excellent learning experience, the DW3005T aims to improve upon its predecessor with enhanced performance, better stability, and a more professional design.
[!WARNING]
WORK IN PROGRESS
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LOGO | logos.preety:screw | G***, G***, G***, G*** |
| 4 | MBR3045CT | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | D30, D31, D32, D33 |
| 2 | 0R2 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R40, R41 |
| 2 | 2200u | Capacitor_THT:CP_Radial_D22.0mm_P10.00mm_SnapIn | C30, C31 |
| 2 | BD139 | Package_TO_SOT_THT:TO-126-3_Horizontal_TabUp | Q41, Q43 |
| 2 | BD249C | Package_TO_SOT_THT:TO-247-3_Horizontal_TabUp | Q40, Q42 |
| 2 | BYG22B | Diode_SMD:D_SMA | D20, D21 |
| 2 | FINDER-40.41 | Relay_THT:Relay_SPDT_Finder_36.11 | K20, K21 |
| 1 | JST_B4B-XH-A | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | JST_B4P-VH | Connector_JST:JST_VH_B4P-VH_1x04_P3.96mm_Vertical | J11 |
| 1 | XT30 | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J12 |

Matchboxscope/Matchboxscope
ESP32-based mini microscope for fluidic device observation






xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.

Aleksei327/STM32G474-Precision-Lab-Power-Supply
Precision 0–50 V programmable laboratory PSU with 1 mV/1 mA setting steps, hybrid synchronous-buck + linear regulation, STM32G474 control, INA228 metering, and layered hardware protection.
It measures 100 × 79 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the MBR3045CT, BD139 and BYG22B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dominik-Workshop/dw3005t repository on GitHub, at the commit this page was made from: the board is pcb/power-board/power-board.kicad_pcb and its schematic pcb/power-board/power-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).