2 layers23.4 × 23.5 mm
2 layers
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 21
- Pads
- 78
- Tracks, vias
- 104, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 9 Apr 2015
- Updated
- 10 Apr 2015
Overview
Pap is an open-source printed circuit board by dolphin22, from the dolphin22/iSmartPlug repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board with 23 parts on 21 nets, routed with 104 tracks and 6 vias.
It is built around the MC34063, MOC3020M and ESP8266-07S, with the JUMPER3 among its other parts. Its parts include 5 resistors, 4 capacitors, 3 ICs, 3 connectors and 2 inductors. It belongs with the ESP8266 boards of this library.
Main components
4
MC34063
SOP-80℃~+70℃@(TA) 1 33kHz 3V~40V Adjustable Buck、Boost Built-in Inverting No SOP-8 DC-DC Converters ROHSHXY MOSFETDC-DC Converters
MOC3020M
DIP-6-40℃~+85℃ 1 1.15V 4.17kV 400V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output OptoisolatorsESP8266-07S
SMD-16P,16.0x17.0SMD-16P,16.0x17.0 New Arrivals ROHSAi-ThinkerUncategorisedJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
README
README.mdiPlug
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220 | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | CONN_01X02 | Connect:AK300-2 | P1, P2 |
| 1 | 1.8 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R3 |
| 1 | 100uF | Capacitors_SMD:c_elec_6.3x7.7 | C4 |
| 1 | 13k | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 1uH | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | L2 |
| 1 | 220pF | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 22k | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 330uH | Inductors:SELF-WE-PD-XXL | L1 |
| 1 | 33uF | Capacitors_SMD:c_elec_5x5.8 | C3 |
| 1 | 470uF | papLib:C_Radial_D8_L11.5_P3.5 | C1 |
| 1 | CONN_01X03 | Socket_Strips:Socket_Strip_Straight_1x03 | P3 |
| 1 | DS107S_SMD | papLib:DS107S_SMD | BR1 |
| 1 | D_Schottky | Diodes_SMD:Diode-DO-214BA | D1 |
| 1 | ESP8266_07 | papLib:ESP8266_07 | H1 |
| 1 | JUMPER3 | Socket_Strips:Socket_Strip_Straight_1x03 | JP1 |
| 1 | MC34063 | papLib:DIP-8__300 | U3 |
| 1 | MOC3020M | papLib:DIP-6__300 | U2 |
| 1 | SW_PUSH | papLib:RST_SWITCH_SMD | SW1 |
| 1 | TRANSFO_3PINS | papLib:ZN28150BA2-12V-1.2W | T1 |
| 1 | TRIAC | Transistors_TO-220:TO-220_Neutral123_Vertical | U1 |
Questions
What parts does the Pap use?
23 parts, built around the MC34063, MOC3020M, ESP8266-07S and JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pap KiCad files?
From the dolphin22/iSmartPlug repository on GitHub, at the commit this page was made from: the board is pap/pap.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pap design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers62 × 42 mm
- 2 layers50 × 50 mm
- 2 layers79 × 29 mm
- 2 layers69.2 × 53.9 mm
- 2 layers240 × 63 mm
- 2 layers147.8 × 106.3 mm
Mr washi
mayermakes/MyGenWashy
Generic washing Machine Controller - Result of the TuttleButtle Hackathon 2025
54 parts12GPL-3.0 - 4 layers78 × 78 mm
