

Sensorend
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 31
- Pads
- 148
- Tracks, vias
- 698, 93
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 13 Oct 2021
- Updated
- 4 Sep 2018
Overview
Sensorend is an open-source printed circuit board by koson, from the koson/hometether repository on GitHub. It is a 2-layer board of 50 × 50 mm with 38 parts on 31 nets, routed with 698 tracks and 93 vias.
It is built around the DS18B20, ESP8266-07S and LM78M05CT, with the REG1117, RJ45 and S8550 among its other parts. Its parts include 17 resistors, 4 ICs, 4 connectors, 3 capacitors and 2 transistors. It belongs with the ESP8266 boards of this library.
Main components
6DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature SensorsESP8266-07S
SMD-16P,16.0x17.0SMD-16P,16.0x17.0 New Arrivals ROHSAi-ThinkerUncategorisedLM78M05CT
TO-220-40℃~+125℃@(Tj) 1 1uV 35V 4mA 500mA 5V 78dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsREG1117
SOT-223-4-40℃~+125℃@(Tj) 1 1.25V~13.5V 1.2V@(800mA) 15V 5mA 62dB@(120Hz) 800mA Adjustable Over Current Protection、Over Temperature Protection Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorisedS8550
SOT-23-55℃~+150℃ 1 PNP 100nA 120 150MHz 25V 300mW 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | SM0603 | R4, R5, R9, R11, R12, R15 |
| 3 | 1K | SM0603 | R7, R10, R13 |
| 3 | 4K7 | SM0603 | R8, R16, R17 |
| 2 | 0 | SM0603 | R1, R2 |
| 2 | 100 | SM0603 | R3, R14 |
| 2 | 100u | C1V5 | C1, C2 |
| 2 | DBG | JMP3 | JP1, JP3 |
| 2 | RJ45 | RJ45_8 | J1, J2 |
| 2 | S8550 | SOT23 | Q1, Q2 |
| 1 | 10u | SM1206 | C3 |
| 1 | 5VIN | JMP3 | JP4 |
| 1 | DS18B20 | PIN_ARRAY_3X1 | K1 |
| 1 | ESP8266-07 | ESP8266-07 | U2 |
| 1 | HX1838 | PIN_ARRAY_3X1 | K2 |
| 1 | IRMOTION | PIN_ARRAY_4x1 | P2 |
| 1 | LED | LED-5MM | D1 |
| 1 | LM78M05CT | TO252-m2 | U1 |
| 1 | LUMIN | PIN_ARRAY_2X1 | R6 |
| 1 | NRF24L01-M | nRF24L01M | U3 |
| 1 | PROG | PIN_ARRAY_2X1 | JP2 |
| 1 | REG1117 | SOT223 | IC1 |
| 1 | RFM69HCW_95 | RFM69HCW_95 | M1 |
| 1 | SI4432 | SI4432 | P1 |
More from koson/hometether
6- 2 layers48.4 × 46.2 mm

- 2 layers48.3 × 46 mm

- 2 layers49.8 × 46 mm

- 2 layers66 × 69 mm

- 2 layers49.8 × 47.2 mm

- 2 layers49.8 × 47.2 mm

Similar boards
- 2 layers51.8 × 47.5 mm

Ethernet
Erhannis/LaserEthernet
Cleanup and manufacture-prep of http://blog.svenbrauch.de/2017/02/19/homemade-10-mbits-laser-optical-ethernet-transceiver, license CC-BY-SA-NC 4.0
79 parts - 2 layers49.3 × 47.5 mm

Ethernet
oguzhanbaser/GalvoScanner
Gazebo-Sim/ mytestpkg/ CMakeLists.txt (ROS paketi derleme tanımı) package.xml (ROS paket meta verisi) launch/cameragazebo.launch (Kamera modelini Gazebo’da başlatma) urdf/cameramodel.xacro (Parametrik kamera URDF/Xacro…
72 parts - 4 layers138.6 × 100 mm

MegaDAQ
Orthogonal-Systems/MegaDAQ
Data acquisition shield for VMEMega system compatible with arduino mega boards. 16 12b ADCs and 12 12b DACs.
168 partsGPL-3.0 - 2 layers23.4 × 23.5 mm

- 2 layers62 × 42 mm

- 2 layers

- 2 layers79 × 29 mm

- 2 layers49 × 49 mm

Questions
How big is the Sensorend PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensorend use?
38 parts, built around the DS18B20, ESP8266-07S, LM78M05CT and REG1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensorend KiCad files?
From the koson/hometether repository on GitHub, at the commit this page was made from: the board is kicad/stm32_RJ45_4x2/sensorend.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensorend design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.