dokuhn/ESP8266-WLEDThis work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
ESP8266-WLED is an open-source printed circuit board by dokuhn, from the dokuhn/ESP8266-WLED repository on GitHub. It is a 2-layer board of 25 × 40 mm with 32 parts on 30 nets, routed with 136 tracks and 34 vias.
It is built around the ESP-12F, MIC5219-3.3YM5 and WS2812B. Its parts include 8 capacitors, 7 resistors, 5 connectors, 4 diodes and 2 ICs. It belongs with the ESP8266 boards of this library.
 |  |
|---|---|
| Top | Bottom |
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 4 | Conn_01x01_Socket | TestPoint:TestPoint_Pad_D1.5mm | J2, J3, J4, J5 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C6, C7 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | ESP-12F | RF_Module:ESP-12E | U1 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
The 28 most common of 32 parts.
athulskrishna/Solar-Farm-Monitoring-System-with-Predictive-Anomaly-Detection
An end-to-end IoT and embedded systems solution designed to monitor solar farm parameters in real-time and predict environmental or operational anomalies.
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
It measures 25 × 40 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ESP-12F, MIC5219-3.3YM5 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dokuhn/ESP8266-WLED repository on GitHub, at the commit this page was made from: the board is KiCad/ESP8266-WLED.kicad_pcb and its schematic KiCad/ESP8266-WLED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dokuhn before reusing the design.