Skip to the content
2 layers80.3 × 40.7 mmProject1, the printed circuit board in 3D

An end-to-end IoT and embedded systems solution designed to monitor solar farm parameters in real-time and predict environmental or operational anomalies.

Size
80.3 × 40.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
72
Nets
82
Pads
280
Tracks, vias
695, 223
Pours
7
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
11 Jun 2026
Updated
6 Sep 2026

Overview

Project1 is an open-source printed circuit board by athulskrishna, from the athulskrishna/Solar-Farm-Monitoring-System-with-Predictive-Anomaly-Detection repository on GitHub. It is a 2-layer board of 80.3 × 40.7 mm with 72 parts on 82 nets, routed with 695 tracks and 223 vias.

It is built around the ESP-12F, LM5160DNTR and MIC5219-3.3YM5, with the SS14 among its other parts. Its parts include 27 capacitors, 19 resistors, 6 ICs, 6 connectors and 4 diodes. It belongs with the ESP8266 and STM32 boards of this library.

Main components

4

README

README.md

Solar Farm Monitoring System with Predictive Anomaly Detection

An end-to-end IoT and embedded systems solution designed to monitor solar farm parameters in real-time and predict environmental or operational anomalies. The system utilizes a multi-node architecture to collect sensor data over a robust wireless network and processes it for predictive analytics.

🏗️ System Architecture

The project features a modular Master-Slave deployment strategy targeting localized sensor telemetry and centralized data aggregation:

  • Slave Node (Sensor Telemetry): Responsible for interfacing with localized sensors (voltage, current, temperature, irradiance), processing raw data, and handling low-power states.
  • Master Node (Data Aggregator): Aggregates incoming data packets from multiple Slave Nodes, executes initial filtering, and handles uplink data formatting for local storage or cloud ingestion dashboards.
  • Hardware Design: Custom-engineered PCB layouts optimized for noise immunity, power regulation, and reliable RF/wireless signal integrity.

📂 Repository Structure

text
├── Master_Node/          # STM32 firmware for the central aggregator node
│   ├── Core/             # Application source (Src) and headers (Inc)
│   ├── Drivers/          # HAL and hardware-specific abstraction layers
│   └── *.ioc             # STM32CubeIDE hardware configuration file
│
├── Slave_Node/           # STM32 firmware for remote telemetry sensor nodes
│   ├── Core/             # Sensor polling and communication logic
│   └── Drivers/          # Peripheral initialization drivers
│
└── pcb_design/           # Hardware schematics and manufacturing files
    ├── *.kicad_sch       # Schematic capture source files
    ├── *.kicad_pcb       # Multi-layer PCB layout routing
    └── gerbers/          # Production-ready Gerber and drill data files

Parts

72
QtyValueFootprintReferences
810kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R11, R12, R13, R14, R16, R18, R19
5100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC7, C8, C18, C22, C25
510uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC9, C10, C13, C14, C26
44.7uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC11, C12, C19, C23
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2, H3, H4
30.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC16, C17, C24
31uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C15, C21
34.7kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10, R15, R17
3FiducialFiducial:Fiducial_1mm_Mask2mmFID1, FID2, FID3
3SS14Diode_SMD:D_SMAD3, D4, D5
22.2uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
22kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R8
2Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ3, J4
10.01uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6
10.022uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
10.47Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6
10.47uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
110nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC20
1127kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1169kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
118.2kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
13.01kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5
1470Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9
1470nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC27
147uHInductor_SMD:L_Bourns_SRP1038C_10.0x10.0mmL1
1Battery ConnectorConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ2
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1ESP-12FRF_Module:ESP-12EU6
1INA260Package_SO:TSSOP-16_4.4x5mm_P0.65mmU4
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1LM5160DNTRPackage_QFP:LM5160DNTRU1
1LOGOCEC:UntitledG***
1MCP73831-3-OTPackage_TO_SOT_SMD:SOT-23-5U2
1MIC5219-3.3YM5Package_TO_SOT_SMD:SOT-23-5U3
1STLINK ConnConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5
1STM32F072C8TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU5
1SW_Push_SPDTButton_Switch_SMD:SW_SPST_B3U-1100PSW1
1outConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6

Similar boards

  • 2 layers25 × 40 mmESP8266-WLED, the printed circuit board in 3D

    ESP8266-WLED

    dokuhn/ESP8266-WLED

    This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].

    32 parts
  • 2 layers98.8 × 55.1 mmH bridge controller, the printed circuit board in 3D

    H bridge controller

    jayanta525/dual-h-bridge

    Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller

    104 parts5MIT
  • 2 layers50 × 50 mmEsp32 drone, the printed circuit board in 3D

    Esp32 drone

    saravanan-x/esp32-drone-pcb_design

    61 parts
  • 2 layers22.5 × 110.8 mmSMS, the printed circuit board in 3D

    SMS

    Lee34667/PCB_Kicad_Projects

    Creating a L9110 module using PCB techniques.

    42 parts1
  • 4 layers44.5 × 22.5 mmIkea fyrtur, the printed circuit board in 3D

    Ikea fyrtur

    mjuhanne/ikea-fyrtur

    ESP8266 WiFi module PCB for Ikea Fyrtur blinds

    46 parts23MIT
  • 2 layers92.4 × 113.4 mmAutomation, the printed circuit board in 3D

    Automation

    CK20000/STM32-Digital-Twin-Project-Status-Architecture

    Tired of paywalled PCB simulators? Open-source, physics-accurate digital twin for KiCad. Real MCU (Renode), real analog (ngspice), live PyQt6 dashboard. No stubs, no fake numbers. Fork and grow it.

    143 parts2MIT
  • 4 layers97.8 × 99.6 mmStepper Module, the printed circuit board in 3D

    Stepper Module

    McReeii/Stepper-Module

    Smart_Stepper_Module

    171 partsMIT
  • 2 layers43.3 × 26.3 mmSample, the printed circuit board in 3D

    Sample

    pavankalyan226/Esp12E-F

    PCB

    30 parts

Questions

How big is the Project1 PCB?

It measures 80.3 × 40.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Project1 use?

72 parts, built around the ESP-12F, LM5160DNTR, MIC5219-3.3YM5 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Project1 KiCad files?

From the athulskrishna/Solar-Farm-Monitoring-System-with-Predictive-Anomaly-Detection repository on GitHub, at the commit this page was made from: the board is pcb_design/project1.kicad_pcb and its schematic pcb_design/project1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Project1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask athulskrishna before reusing the design.