

AvionicsBoard
Some work I do for CycloneRocketry
- Size
- 106.7 × 60.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 99
- Pads
- 302
- Tracks, vias
- 953, 178
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Jan 2018
- Updated
- 1 May 2019
Overview
AvionicsBoard is an open-source printed circuit board by djmallek, from the djmallek/CycloneRocketry repository on GitHub. It is a 2-layer board of 106.7 × 60.3 mm with 72 parts on 99 nets, routed with 953 tracks and 178 vias.
It is built around the ATSAMD21G18A-AU, MAX-M8W-0 and MPL3115A2R1, with the ECS-.327-12.5-17X-TR, BNO055 and LT1117CST-3.3#TRPBF among its other parts. Its parts include 22 capacitors, 18 connectors, 13 resistors, 10 ICs and 5 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
7ATSAMD21G18A-AU
TQFP-48-40℃~+85℃ 1.62V~3.6V 10bit 12bit 256KB 32 Bit 32KB 38 48MHz ARM Cortex-M0+ Built-in FLASH 上电复位(POR)、欠压检测(BOR/LVD/LVR/LVI)、看门狗复位、内置通用定时器、硬件CRC、日历功能、触控功能 TQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MAX-M8W-0
SMD-18P-167dBm -40℃~+85℃ 2.7V~3.6V GPS、BeiDou、Galileo、GLONASS UART、I2C SMD-18P GNSS Modules ROHSu-bloxGNSS ModulesMPL3115A2R1
LGA-8(3x5)-40℃~+85℃ 0.05Kpa 0.4Kpa 1.95V~3.6V 1s 2uA 50Kpa~1.1bar I2C LGA-8(3x5) Pressure Sensors ROHSNXP SemiconductorsPressure SensorsECS-.327-12.5-17X-TR
MC-306-40℃~+85℃ 12.5pF 32.768kHz 50kΩ ±20ppm MC-306 Crystals ROHSECSCrystalsBNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometersLT1117CST-3.3#TRPBF
SOT-223-30.003%Vout 0℃~+125℃ 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRFM95W
SMD-16PUncategorisedHopeRF Micro-electronics
README
README.mdCyclone Rocketry
This is an avionics control board for Iowa State's Cyclone Rocketry club. Our rocketry must carry a payload to a target altitude of 10,000ft. Score is determined by how close a team's rocket can get to the target altitude, among other things. To ensure we hit our target altitude, we have an air brakes system which actively calculates when and how long it needs to deploy it's air brakes system. The board additionally provides data-logging and radio-relayed GPS tracking.
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10u | Capacitors_SMD:C_1206 | C4, C6, C11, C12, C20, C21 |
| 4 | 1U | Capacitors_SMD:C_0805 | C1, C5, C9, C10 |
| 4 | 22p | Capacitors_SMD:C_0805 | C2, C3, C18, C19 |
| 4 | CHASSIS GND | Mounting_Holes:MountingHole_2.5mm_Pad | J15, J16, J17, J18 |
| 4 | LED | LEDs:LED_1206 | D3, D4, D5, D6 |
| 3 | 100n | Capacitors_SMD:C_0805 | C14, C17, C22 |
| 3 | 10k | Resistors_SMD:R_0805 | R10, R11, R12 |
| 3 | 1K | Resistors_SMD:R_0805 | R19, R20, R21 |
| 2 | 10K | Resistors_SMD:R_0805 | R7, R8 |
| 2 | 1u | Capacitors_SMD:C_0805 | C7, C13 |
| 2 | 2.2k | Resistors_SMD:R_0805 | R2, R3 |
| 2 | ECS-.327-12.5-17X-TR | FoxWestern:XC1195CT-ND | U9, U10 |
| 2 | RF IN | DannysLib:SMA_TH | J7, J12 |
| 1 | 10 | Resistors_SMD:R_0805 | R1 |
| 1 | 10n | Capacitors_SMD:C_0805 | C8 |
| 1 | 120n | Capacitors_SMD:C_1206 | C16 |
| 1 | 12v | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J4 |
| 1 | 1k | Resistors_SMD:R_0805 | R13 |
| 1 | 330 | Resistors_SMD:R_0805 | R4 |
| 1 | 6.8n | Capacitors_SMD:C_1206 | C15 |
| 1 | ATSAMD21G18 | Housings_QFP:TQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | BNO055 | FoxWestern:BNO055-LGA | U7 |
| 1 | Battery_Cell | DannysLib:BR-1225A_HB | BT1 |
| 1 | Buzzer | DannysLib:CUI_CMT-5023S-SMT | BZ1 |
| 1 | CHASSIS LED | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J14 |
| 1 | DS3231-SO16 | Housings_SOIC:SOIC-16W_7.5x10.3mm_Pitch1.27mm | U5 |
| 1 | D_Zener | Diodes_SMD:D_SOD-123 | D1 |
| 1 | FDBK | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J8 |
| 1 | I2C | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J10 |
| 1 | LOGO | RocketShopLogos:QRcode | G*** |
| 1 | LOGO | RocketShopLogos:CycloneRocketryLogo | G*** |
| 1 | LT1117CST-3.3#TRPBF | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | MAX-M8W | FoxWestern:MAX_M8 | U4 |
| 1 | MCP1825S | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | MPL3115A2 | FoxWestern:MPL3115A2 | U6 |
| 1 | Micro_SD_Card | Connectors:microSD_Card_Receptacle_Wuerth_693072010801 | J6 |
| 1 | PWM | Pin_Headers:Pin_Header_Straight_2x02_Pitch2.54mm | J9 |
| 1 | RFM95W | FoxWestern:RFM95W | U8 |
| 1 | SD_CS | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J13 |
| 1 | SPI | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J5 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | UART | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J11 |
| 1 | USB_A | Connectors:USB_Mini-B | J1 |
| 1 | XT-60 | FoxWestern:XT60 | J2 |
More from djmallek/CycloneRocketry
8- 2 layers157.4 × 59 mm

- 4 layers25 × 0.3 mm

- 4 layers

- 2 layers118.7 × 184.1 mm

- 2 layers118.7 × 129.5 mm

- 2 layers53.3 × 127 mm

- 4 layers25 × 0.3 mm

- 4 layers25 × 0.3 mm

Similar boards
- 4 layers100 × 132.5 mm

IcE1usb panel
osmocom/osmo-e1-hardware
Osmocom open source E1 (TDM) hardware; mirror of https://gitea.osmocom.org/retronetworking/osmo-e1-hardware
240 parts9 - 2 layers53.8 × 53.1 mm

Obd32
mkrasselt1/obd32
Anyone is free to join our goal to make the hardware reliable and affordable.
79 parts4 - 2 layers50 × 77.5 mm

GPS board v3
MatthewBoeding/GPSboard
Lab 2 for ECEN-435 design files. Will update as necessary.
17 parts1BSD-3-Clause - 2 layers34.7 × 1 mm

- 4 layers85.1 × 100.5 mm

Onboard pcb
rober708/BIRD-E
The Bounded Infrared Recording Drone Ecosystem (BIRD-E) is a tethered quadcopter with an attached infrared camera, with livestream functionality and XBOX ground control. Senior design capstone at Purdue ECE.
103 parts - 2 layers83.8 × 94 mm

- 4 layers22.9 × 62.2 mm

- 2 layers23.9 × 26 mm

Questions
How big is the AvionicsBoard PCB?
It measures 106.7 × 60.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AvionicsBoard use?
72 parts, built around the ATSAMD21G18A-AU, MAX-M8W-0, MPL3115A2R1 and ECS-.327-12.5-17X-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AvionicsBoard KiCad files?
From the djmallek/CycloneRocketry repository on GitHub, at the commit this page was made from: the board is Board3 - Shorty/AvionicsBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AvionicsBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask djmallek before reusing the design.