Skip to the content
12345678

MPL3115A2R1

NXP SemiconductorsExtended

-40℃~+85℃ 0.05Kpa 0.4Kpa 1.95V~3.6V 1s 2uA 50Kpa~1.1bar I2C LGA-8(3x5) Pressure Sensors ROHS

Part id
nxp/MPL3115A2R1
Category
Pressure Sensors
Package
LGA-8(3x5)
Pins
8
In stock
2,202 at JLCPCB (C54429)
Used on
52 open-source boards

Overview

The MPL3115A2R1 is a pressure Sensor made by NXP Semiconductors in a LGA-8(3x5) package with 8 pins. -40℃~+85℃ 0.05Kpa 0.4Kpa 1.95V~3.6V 1s 2uA 50Kpa~1.1bar I2C LGA-8(3x5) Pressure Sensors ROHS.

PCBKit's library has its KiCad symbol (Sensor_Pressure:MPL3115A2, from KiCad's library) and its footprint (Package_LGA:NXP_LGA-8_3x5mm_P1.25mm_H1.1mm, from KiCad's library), ready for a KiCad board. 2,202 are in stock at JLCPCB (part C54429). 52 open-source boards in 33 repositories on GitHub use it.

Symbol

1VDD2CAP3GND4VDDIO5INT26INT17SDL8SCL
Sensor_Pressure:MPL3115A2From KiCad's library

Footprint

12345678
Package_LGA:NXP_LGA-8_3x5mm_P1.25mm_H1.1mmFrom KiCad's library

Pinout

8
The pins of the MPL3115A2R1
PinNameType
1VDDPower in
2CAPPassive
3GNDPower in
4VDDIOPower in
5INT2Open collector
6INT1Open collector
7SDLInput/output
8SCLInput

Open-source boards using it

52See all 52
  • 4 layers30 × 55 mmAvionics Board, the printed circuit board in 3D

    Avionics Board

    ModelRocketryAvionics/Avionics-Board

    Avionics PCB for Model Rocketry

    67 parts8
  • 4 layers50 × 60 mmLyrav3og, the printed circuit board in 3D

    Lyrav3og

    prs2026/Lyra-flight-computer

    repo for the lyra flight computer

    135 parts3GPL-3.0
  • 4 layers100.3 × 29 mmRocketPCB, the printed circuit board in 3D

    RocketPCB

    scottzach1/Project-Beans

    VUW Engineering project to deliver a model rocket for a client.

    76 parts3MIT
  • 4 layers32 × 25.5 mmEngineControl, the printed circuit board in 3D

    EngineControl

    Badger-Embedded/BadgerHW-EngineControl

    62 parts2
  • 2 layers52 × 29 mmAudible altimeter, the printed circuit board in 3D

    Audible altimeter

    buq2/audible_altimeter

    Audible altimeter KiCad schematic for skydiving

    52 parts2
  • 2 layers152.4 × 63.7 mmCut down control board, the printed circuit board in 3D

    Cut down control board

    dwkennedy/ballooning

    Mutli-function balloon related project (variometer, balloon cut-down, let down reel, tracking)

    52 parts2GPL-3.0
  • 2 layers142 × 23 mmMassue bento v4, the printed circuit board in 3D

    Massue bento v4

    benkuper/BenTo-Legacy

    Legacy repository for the former BenTo-Club project

    101 parts1GPL-3.0
  • 2 layers48.3 × 43.2 mmBlackbox ng, the printed circuit board in 3D

    Blackbox ng

    calstar/blackbox-ng

    Blackbox Next Generation

    62 parts1BSD-3-Clause

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the MPL3115A2R1?

Yes. The symbol is Sensor_Pressure:MPL3115A2 and the footprint Package_LGA:NXP_LGA-8_3x5mm_P1.25mm_H1.1mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MPL3115A2R1?

LGA-8(3x5), with 8 pins. Its footprint is drawn on this page.

Where is the MPL3115A2R1 datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the MPL3115A2R1?

JLCPCB lists it as part C54429, with 2,202 in stock; the sellers' links on this page open their listings.

What can replace the MPL3115A2R1?

Parts like it in the library: the MPL115A1T1 by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MPL3115A2R1?

52 boards in 33 repositories on GitHub; the most starred are listed on this page, with their KiCad files.