

Renfield
Demo for diode boards
- Size
- 37 × 17 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 42
- Nets
- 47
- Pads
- 168
- Tracks, vias
- 302, 70
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Aug 2025
- Updated
- 5 May 2026
Overview
Renfield is an open-source printed circuit board by dioderobot, from the dioderobot/demo repository on GitHub. It is a 4-layer board of 37 × 17 mm with 42 parts on 47 nets, routed with 302 tracks and 70 vias.
It is built around the STM32G0B1KBU6N, TCPP01-M12 and TPS70933QDRVRQ1, with the VLMB1500-GS08, CSD17318Q2 and LTST-C281KSKT among its other parts. Its parts include 9 capacitors, 9 resistors, 4 diodes, 3 ICs and 3 connectors. It belongs with the STM32 boards of this library.
Main components
9STM32G0B1KBU6N
UFQFPN-32(5x5)UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TCPP01-M12
QFN-12-EP(3x3)-40℃~+125℃ 120uA Yes QFN-12-EP(3x3) EMI/RFI Filters (LC, RC Networks) ROHSSTMicroelectronicsEMI/RFI Filters (LC, RC Networks)TPS70933QDRVRQ1
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 1.54V@(150mA) 150mA 190uVrms 1uA 3.3V 30V 62dB@(1kHz) Fixed Over Current Protection、Enable、Thermal Shutdown Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsVLMB1500-GS08
0402-20℃~+80℃ 130° 2.8V 28.1mcd 468nm 472nm 5mA 76mW Blue Discrete Diode 0402 LED Indication - Discrete ROHSVishay IntertechnologyLED Indication - DiscreteCSD17318Q2
WSON-6(2x2)-55℃~+150℃ 1 N-channel 1.2V 15.1mΩ@8V 16W 25A 30V 6nC@4.5V 879pF WSON-6(2x2) MOSFETs ROHSTexas InstrumentsMOSFETsLTST-C281KSKT
0402-30℃~+85℃ 130° 180mcd 20mA 2V~2.4V 587nm~597nm 588nm 75mW Discrete Diode Water Clear Yellow 0402 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteSSM3K15ACT,L3F
SOT-883-31 N-channel 1.5V 100mA 100mW 13.5pF 30V 6.5pF 6Ω@2.5V 8pF N-Channel SOT-883-3 MOSFETs ROHSToshibaMOSFETsUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB ConnectorsVLMS1500-GS08
0402-30℃~+85℃ 130° 20mA 2V 54mcd 631nm 639nm 75mW Discrete Diode Red 0402 LED Indication - Discrete ROHSVishay IntertechnologyLED Indication - Discrete
README
README.mdDiode PCB boards
This repository contains schematics and boards built using the pcb command line utility by Diode, using the Zener language and open source compiler
Prerequisites
For the most up to date information, visit our documentation at docs.pcb.new
The open source PCB compiler is available at github.com/diodeinc/pcb
- KiCad 9.0
- Required for PCB layout
- Download from KiCad website
Project Structure
.
├── README.md
├── components # Auto-generated component definitions (do not edit)
├── modules # User-authored reusable modules (.zen files)
├── boards # Board designs that use modules (.zen files)
└── pcb.toml # Project configurationUsage Guidelines
Building Projects
- Build your project using:
bash pcb build
Important Rules
-
Dependencies
- Always use
pcb addfor dependencies - Never modify pcb.toml directly
- Only add dependencies to directories with a
pcb.tomlfile
- Always use
-
Best Practices
- Components in
components/are auto-generated - never edit them manually - Create reusable modules in
modules/directory - Board designs go in
boards/directory - Use generic components for basic elements (capacitors, resistors, inductors)
- Consult component datasheets when available
- Components in
-
Project Files
- Build artifacts are stored in
.pcb/directory - Project configuration is in
pcb.toml - Component files use
.zenextension
- Build artifacts are stored in
Zener Language Reference
Zener is a Starlark-based language for defining electronic components, modules, and boards as code. Starlark is a simplified dialect of Python designed for configuration files.
Key Concepts
-
Components (in
components/directory)- Auto-generated using
pcb search <PART_NUMBER> - Never edit these manually
- Stored as
.zenfiles
- Auto-generated using
-
Modules (in
modules/directory)- User-authored reusable logic
- Combine components and define connections
- Named as
<module_name>.zen
-
Boards (in
boards/directory)- Instantiate modules for real-world use
- Define the final PCB design
- Named as
<board_name>.zen
Basic Syntax
Since Zener is based on Starlark, it follows Python-like syntax:
- Variables and functions follow Python conventions
- Comments use
# - Indentation matters
- No type annotations required
For detailed syntax and examples, refer to the Diode PCB documentation
Component Management
Components are managed through the pcb command line tool:
- Use
pcb pro search <PART_NUMBER>to find components - Components are automatically downloaded and stored in
components/ - Each component includes symbol, footprint, 3D model, and datasheet information
Contributing
When contributing to this repository, please:
- Follow the project structure
- Use the provided tools for component and module creation
- Ensure all components are properly documented
- Test your changes with
pcb build
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | ? | kicad_libraries_kicad-footprints_TestPoint@9.0.3:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 3 | Fiducial | kicad_libraries_kicad-footprints_Fiducial@9.0.3:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 3 | GCM155R71H104KE02D | kicad_libraries_kicad-footprints_Capacitor_SMD@9.0.3:C_0402_1005Metric | C3, C8, C9 |
| 2 | ERJ-2RKF1002X | kicad_libraries_kicad-footprints_Resistor_SMD@9.0.3:R_0402_1005Metric | R1, R3 |
| 2 | ERJ-2RKF3900X | kicad_libraries_kicad-footprints_Resistor_SMD@9.0.3:R_0402_1005Metric | R4, R6 |
| 2 | GCM1555C1H221FA16D | kicad_libraries_kicad-footprints_Capacitor_SMD@9.0.3:C_0402_1005Metric | C1, C2 |
| 2 | GRM155Z71A105KE01D | kicad_libraries_kicad-footprints_Capacitor_SMD@9.0.3:C_0402_1005Metric | C6, C7 |
| 2 | VLMB1500-GS08 | kicad_libraries_kicad-footprints_LED_SMD@9.0.3:LED_0402_1005Metric | D2, D4 |
| 1 | 2060-452/998-404 | diodeinc_registry_components_Wago_2060-4xx_998-404@0.1.1:2060-4xx_998-404-2P-white | J1 |
| 1 | ? | stdlib_generics_footprints:version-footprint | V1 |
| 1 | ? | kicad_libraries_kicad-footprints_Connector@9.0.3:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | CSD17318Q2 | diodeinc_registry_components_Texas_Instruments_CSD1731xQ2@0.1.0:CSD1731xQ2 | Q2 |
| 1 | ERJ-2RKF1003X | kicad_libraries_kicad-footprints_Resistor_SMD@9.0.3:R_0402_1005Metric | R7 |
| 1 | ERJ-2RKF1802X | kicad_libraries_kicad-footprints_Resistor_SMD@9.0.3:R_0402_1005Metric | R8 |
| 1 | ERJ-2RKF2943X | kicad_libraries_kicad-footprints_Resistor_SMD@9.0.3:R_0402_1005Metric | R9 |
| 1 | ERJ-2RKF4700X | kicad_libraries_kicad-footprints_Resistor_SMD@9.0.3:R_0402_1005Metric | R5 |
| 1 | ERJ-2RKF8200X | kicad_libraries_kicad-footprints_Resistor_SMD@9.0.3:R_0402_1005Metric | R2 |
| 1 | GRM188Z71C475KE21D | kicad_libraries_kicad-footprints_Capacitor_SMD@9.0.3:C_0603_1608Metric | C5 |
| 1 | GRM21BZ71H475KE15K | kicad_libraries_kicad-footprints_Capacitor_SMD@9.0.3:C_0805_2012Metric | C4 |
| 1 | LTST-C281KSKT | kicad_libraries_kicad-footprints_LED_SMD@9.0.3:LED_0402_1005Metric | D1 |
| 1 | SSM3K15ACT,L3F | diodeinc_registry_components_Toshiba_SSM3KxxxCT@0.1.0:SSM3KxxxCT | Q1 |
| 1 | STM32G0B1KBU6N | diodeinc_registry_components_STMicroelectronics_STM32G0B1KxUxN@0.1.4:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U2 |
| 1 | TCPP01-M12 | diodeinc_registry_components_STMicroelectronics_TCPP01-M12@0.1.1:QFN-12-1EP_3x3mm_P0.5mm_EP1.45x1.45mm | U3 |
| 1 | TPS70933QDRVRQ1 | diodeinc_registry_components_Texas_Instruments_TPS709-Q1@0.1.0:TPS709-Q1 | U1 |
| 1 | USB4105-GF-A | kicad_libraries_kicad-footprints_Connector_USB@9.0.3:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | VLMS1500-GS08 | kicad_libraries_kicad-footprints_LED_SMD@9.0.3:LED_0402_1005Metric | D3 |
The 41 most common of 42 parts.
More from dioderobot/demo
12- 4 layers115 × 234.4 mm

- 6 layers24.9 × 51.5 mm

- 6 layers62.1 × 56.2 mm

- 4 layers15 × 51.1 mm

- 4 layers34.3 × 17 mm

- 4 layers32 × 14 mm

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

Similar boards
- 4 layers90 × 44.8 mm

- 4 layers88.9 × 96.5 mm

Ers s32-board
schrodlm/nxp_hal
In this assignment the target platform changes from the STM32F407 to the NXP S32K118, an Arm Cortex‑M0+ microcontroller from the S32K1xx automotive family.
138 parts - 4 layers42 × 42 mm

- 4 layers42.7 × 48.1 mm

WCAM BREAKOUT PCB R03
OV-Tech-GmbH/OVT13
Open-source thin-and-light 13" laptop
120 parts79CERN-OHL-S-2.0 - 4 layers50 × 100 mm

Flight computer one
liquid-rocketry-illinois/flight-computer-one-hw
SAME51-based flight computer with active control capabilities
105 partsCERN-OHL-S-2.0 - 6 layers320.6 × 186.1 mm

- 6 layers16 × 28.3 mm

- 4 layers70.8 × 66.5 mm

Nic2
oxidecomputer/hw-gimletlet-nic
Daughterboard for the Gimletlet 2 which uses a KSZ8463 to break out two ethernet (RJ-45) connectors. In active use for Hubris development.
53 partsMPL-2.0
Questions
How big is the Renfield PCB?
It measures 37 × 17 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Renfield use?
42 parts, built around the STM32G0B1KBU6N, TCPP01-M12, TPS70933QDRVRQ1 and VLMB1500-GS08. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Renfield KiCad files?
From the dioderobot/demo repository on GitHub, at the commit this page was made from: the board is boards/Renfield/layout/layout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Renfield design in my own project?
Its repository states no licence, so its author keeps all rights: ask dioderobot before reusing the design.