
SL23-modem tester
JitterCompany/debug-tools
Collection of useful utility PCBs for development purposes

PCB layout for Signet HC
Signet2 is an open-source printed circuit board by nthdimtech, from the nthdimtech/signet-hc-pcb repository on GitHub. It is a 6-layer board of 16 × 28.3 mm with 65 parts on 256 nets, routed with 549 tracks and 91 vias.
It is built around the THGBMHG8C2LBAIL, USBULC6-2M6 and VLMB1500-GS08, with the ABM10-167-12.000MHZ-T3 and EVQPLDA15 among its other parts. Its parts include 27 capacitors, 17 resistors, 10 connectors, 4 ICs and 2 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | Capacitor_SMD:C_0201_0603Metric | C3, C4, C5, C6, C7, C8, C10, C13, C14, C15, C17, C18, C19, C20, C26, C27 +1 |
| 13 | 10k | Resistor_SMD:R_0201_0603Metric | R1, R3, R5, R6, R7, R8, R9, R10, R11, R12, R14, R15, R17 |
| 9 | Conn_01x01_Male | signet2:TestPoint_Pad_1.5x1.5mm | J2, J3, J4, J6, J7, J8, J9, J10, J11 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C2, C21, C25 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C11, C12, C16 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R2, R13 |
| 2 | 16pF | Capacitor_SMD:C_0402_1005Metric | C22, C23 |
| 2 | LOGO | signet2:signet_logo | G***, G*** |
| 2 | VLMB1500-GS08 | Diode_SMD:D_0402_1005Metric | D1, D2 |
| 1 | 100k | Resistor_SMD:R_0201_0603Metric | R18 |
| 1 | 10nF | Capacitor_SMD:C_0201_0603Metric | C29 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 3k | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | 480372200 | signet2:MOLEX-480037-2200 | J1 |
| 1 | ABM10-167-12.000MHZ-T3 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | EVQ_PLDA15 | Button_Switch_SMD:SW_SPST_Panasonic_EVQPL_3PL_5PL_PT_A15 | SW1 |
| 1 | LDFM33PUR | signet2:VDFN6 | U1 |
| 1 | STM32F733IEKx | Package_BGA:UFBGA-201_10x10mm_Layout15x15_P0.65mm | U2 |
| 1 | THGBMHG8C2LBAIL | signet2:FBGA153 | IC1 |
| 1 | USBULC6-2M6 | Package_DFN_QFN:ST_UQFN-6L_1.5x1.7mm_Pitch0.5mm | U3 |
The 64 most common of 65 parts.

JitterCompany/debug-tools
Collection of useful utility PCBs for development purposes




oxidecomputer/hw-gimletlet-nic
Daughterboard for the Gimletlet 2 which uses a KSZ8463 to break out two ethernet (RJ-45) connectors. In active use for Hubris development.

peterisza/mobilecg
MobilECG II is an open source clinical grade Holter ECG. For more information, please visit http://mobilecg.hu.

PicoballoonLabs/Debug-Boards
Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator

The810man/cross_pcb
KiCad project to create a custom USB-C key with mass storage and a microSD connector. Find all the KiCad schematics and layout files.
It measures 16 × 28.3 mm and has 6 copper layers, 1.02 mm thick.
65 parts, built around the THGBMHG8C2LBAIL, USBULC6-2M6, VLMB1500-GS08 and ABM10-167-12.000MHZ-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nthdimtech/signet-hc-pcb repository on GitHub, at the commit this page was made from: the board is signet2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nthdimtech before reusing the design.