2 layers100 × 80 mm
2 layers61 × 85 mm
Agritech Esp32
devaexe00/Projects- Size
- 61 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 55
- Pads
- 186
- Tracks, vias
- 422, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Jan 2026
- Updated
- 20 Feb 2026
Overview
Agritech Esp32 is an open-source printed circuit board by devaexe00, from the devaexe00/Projects repository on GitHub. It is a 2-layer board of 61 × 85 mm with 31 parts on 55 nets, routed with 422 tracks and 30 vias.
It is built around the CH340C, ESP32-WROOM-32 and AMS1117-3.3, with the SS8050 among its other parts. Its parts include 7 capacitors, 6 resistors, 5 connectors, 3 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
4
CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3, C4, C6, C7 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C5 |
| 2 | 10k R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3, R6 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J5 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 1 | 10K R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4 |
| 1 | 2k R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R5 |
| 1 | 5.1K R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | 5.1k R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BLUE LED | LED_THT:LED_D5.0mm | D2 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_01x15_Pin_L | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J3 |
| 1 | Conn_01x15_Pin_R | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J2 |
| 1 | EN | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | RED LED | LED_THT:LED_D5.0mm | D1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
Questions
How big is the Agritech Esp32 PCB?
It measures 61 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Agritech Esp32 use?
31 parts, built around the CH340C, ESP32-WROOM-32, AMS1117-3.3 and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Agritech Esp32 KiCad files?
From the devaexe00/Projects repository on GitHub, at the commit this page was made from: the board is Agritech_esp32/Agritech_Esp32.kicad_pcb and its schematic 8channel relay module/relaymodule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Agritech Esp32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask devaexe00 before reusing the design.
More from devaexe00/Projects
2- 2 layers30 × 30 mm
Similar boards
- 2 layers52 × 29 mm
Esp32 wroom mudule
moksh-pcb-design/ESP32-WROOM-Development-Board
Custom ESP32-WROOM-32 Development Board designed in KiCad 10 featuring USB Type-C, CH340C USB-UART interface, AMS1117 power regulation and auto-programming circuitry.
26 parts2 - 2 layers52 × 29 mm
Esp32 wroom
7205jmj/Custom-ESP32-WROOM-32-Development-Board
Most ESP32 development boards available in the market include additional features that may not be required for every project.
26 parts1 - 2 layers52.1 × 29 mm
- 2 layers52 × 30 mm
- 2 layers50 × 35 mm
Esp32 board
Adichidrawar/electronics-assessment-IF
Hardware design solution for the Intelligence Factory Hardware/Mechatronics Engineer take-home assessment. Includes a two-board ESP32-based embedded system with a remote IMU sensor board, complete PCB design in KiCad…
27 parts - 2 layers52 × 29 mm
Esp wroom 32
arm-n/ESP-WROOM-32-Development-Board
A hardware prototyping project based on the ESP-WROOM-32 module, designed using KiCad. This repository contains the circuit schematic, PCB layout, Gerber manufacturing files, design screenshots, datasheets and…
26 parts - 2 layers48 × 41.9 mm
- 4 layers33 × 68.5 mm
ESP32-RTL8201F devboard
PhilipHiet/ESP32-RTL8201F-devboard
Develpoment-board for the ESP32 with a RTL8201F ethernet transceiver and an onboard USB-C debug-interface
52 partsMIT