danielmcneto/Xo-DevBoardAn ESP32 based DevBoard
Xo DevBoard is an open-source printed circuit board by danielmcneto, from the danielmcneto/Xo-DevBoard repository on GitHub. It is a 2-layer board of 48 × 41.9 mm with 29 parts on 59 nets, routed with 657 tracks and 76 vias.
It is built around the CH340C, ESP32-WROOM-32 and AMS1117-3.3, with the SS8050 and B5819W among its other parts. Its parts include 7 resistors, 6 capacitors, 4 connectors, 3 ICs and 3 diodes. It belongs with the microcontroller boards boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C6, C7, C8 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R5, R6, R8 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 10uF/16v | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C5 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 200R | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J5 |
| 1 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J2 |
| 1 | DISPLAY | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | LOGO | codeboy:draw | THAT SHIT WAS HARD TO BUILT |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
The 28 most common of 29 parts.
It measures 48 × 41.9 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the CH340C, ESP32-WROOM-32, AMS1117-3.3 and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danielmcneto/Xo-DevBoard repository on GitHub, at the commit this page was made from: the board is PCB/project.kicad_pcb and its schematic PCB/project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask danielmcneto before reusing the design.
moksh-pcb-design/ESP32-WROOM-Development-Board
Custom ESP32-WROOM-32 Development Board designed in KiCad 10 featuring USB Type-C, CH340C USB-UART interface, AMS1117 power regulation and auto-programming circuitry.
7205jmj/Custom-ESP32-WROOM-32-Development-Board
Most ESP32 development boards available in the market include additional features that may not be required for every project.
Adichidrawar/electronics-assessment-IF
Hardware design solution for the Intelligence Factory Hardware/Mechatronics Engineer take-home assessment. Includes a two-board ESP32-based embedded system with a remote IMU sensor board, complete PCB design in KiCad…
arm-n/ESP-WROOM-32-Development-Board
A hardware prototyping project based on the ESP-WROOM-32 module, designed using KiCad. This repository contains the circuit schematic, PCB layout, Gerber manufacturing files, design screenshots, datasheets and…
wijdanmkh-insk/Tasks
This is my backups from my exercises and for fun coding. I don't like my files that messing around my main drive so instead save them in my computer, I save them here. It's just for fun.