
Esp32 wroom mudule
moksh-pcb-design/ESP32-WROOM-Development-Board
Custom ESP32-WROOM-32 Development Board designed in KiCad 10 featuring USB Type-C, CH340C USB-UART interface, AMS1117 power regulation and auto-programming circuitry.

An ESP32 devboard made specifically for Hack Club!
Orph32 is an open-source printed circuit board by pizzalover125, from the pizzalover125/orpheus32 repository on GitHub. It is a 2-layer board of 33 × 51.5 mm with 28 parts on 59 nets, routed with 294 tracks and 28 vias.
It is built around the CH340C, ESP32-WROOM-32 and AMS1117-3.3, with the SS8050, B5819W and SK6812MINI-E among its other parts. Its parts include 7 resistors, 6 capacitors, 4 diodes, 3 ICs and 3 connectors. It belongs with the microcontroller boards boards and the ESP32 boards of this library.
An ESP32 devboard made for Hack Club. A rival to the famous Orpheus Pico.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nf | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R5, R6 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x15_Pin | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 220R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 22uf | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

moksh-pcb-design/ESP32-WROOM-Development-Board
Custom ESP32-WROOM-32 Development Board designed in KiCad 10 featuring USB Type-C, CH340C USB-UART interface, AMS1117 power regulation and auto-programming circuitry.

7205jmj/Custom-ESP32-WROOM-32-Development-Board
Most ESP32 development boards available in the market include additional features that may not be required for every project.


Adichidrawar/electronics-assessment-IF
Hardware design solution for the Intelligence Factory Hardware/Mechatronics Engineer take-home assessment. Includes a two-board ESP32-based embedded system with a remote IMU sensor board, complete PCB design in KiCad…

arm-n/ESP-WROOM-32-Development-Board
A hardware prototyping project based on the ESP-WROOM-32 module, designed using KiCad. This repository contains the circuit schematic, PCB layout, Gerber manufacturing files, design screenshots, datasheets and…



wijdanmkh-insk/Tasks
This is my backups from my exercises and for fun coding. I don't like my files that messing around my main drive so instead save them in my computer, I save them here. It's just for fun.
It measures 33 × 51.5 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the CH340C, ESP32-WROOM-32, AMS1117-3.3 and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pizzalover125/orpheus32 repository on GitHub, at the commit this page was made from: the board is PCB/orph32.kicad_pcb and its schematic PCB/orph32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pizzalover125 before reusing the design.