Skip to the content
2 layers52 × 29 mmEsp wroom 32, the printed circuit board in 3D

A hardware prototyping project based on the ESP-WROOM-32 module, designed using KiCad. This repository contains the circuit schematic, PCB layout, Gerber manufacturing files, design screenshots, datasheets and…

Size
52 × 29 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
58
Pads
178
Tracks, vias
351, 36
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Sep 2026
Updated
27 Sep 2026

Overview

Esp wroom 32 is an open-source printed circuit board by arm-n, from the arm-n/ESP-WROOM-32-Development-Board repository on GitHub. It is a 2-layer board of 52 × 29 mm with 26 parts on 58 nets, routed with 351 tracks and 36 vias.

It is built around the CH340C, ESP32-WROOM-32 and AMS1117-3.3, with the SS8050 and B5819W among its other parts. Its parts include 7 resistors, 6 capacitors, 3 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 boards of this library.

Main components

5

README

README.md

ESP-WROOM-32 KiCad Prototype

A hardware prototyping project based on the ESP-WROOM-32 module, designed using KiCad. This repository contains the circuit schematic, PCB layout, Gerber manufacturing files, design screenshots, datasheets and supporting documentation.

The project was developed as a learning and hardware prototyping exercise, using technical documentation and component datasheets as references.

Project Overview

ParameterDetails
Project NameESP-WROOM-32 KiCad Prototype
Microcontroller ModuleESP-WROOM-32
Design SoftwareKiCad
Project TypeHardware / PCB Design
Design StagePrototype
RepositoryESP-WROOM-32-Development-Board
AuthorArmaan

Repository Structure

text
esp-wroom-32/
│
├── esp_wroom_32.kicad_pro       # KiCad project settings
├── esp_wroom_32.kicad_sch       # Circuit schematic
├── esp_wroom_32.kicad_pcb       # PCB layout
│
├── ESP-WROOM-32.PDF             # ESP-WROOM-32 datasheet
├── DRC.rpt                      # Design rule check report
│
├── gerber/                      # PCB manufacturing files
│   ├── esp_wroom_32-B_Cu.gbr
│   ├── esp_wroom_32-F_Cu.gbr
│   ├── esp_wroom_32-B_Mask.gbr
│   ├── esp_wroom_32-F_Mask.gbr
│   ├── esp_wroom_32-B_Paste.gbr
│   ├── esp_wroom_32-F_Paste.gbr
│   ├── esp_wroom_32-B_Silkscreen.gbr
│   ├── esp_wroom_32-F_Silkscreen.gbr
│   ├── esp_wroom_32-Edge_Cuts.gbr
│   ├── esp_wroom_32-NPTH.drl
│   ├── esp_wroom_32-PTH.drl
│   └── esp_wroom_32-job.gbrjob
│
├── images/                      # Design screenshots

Hardware Design

This project uses the ESP-WROOM-32 module, which provides integrated Wi-Fi and Bluetooth connectivity.

The KiCad project includes the following design files and documentation:

  • Schematic: Circuit diagram and electrical connections.
  • PCB Layout: Component placement, copper routing and board layout.
  • Gerber Files: PCB fabrication outputs.
  • DRC Report: Design rule check results from the saved design.
  • Datasheet: Technical specifications and reference information for the ESP-WROOM-32 module.
  • Design Images: Screenshots documenting the schematic, PCB and design process.

Refer to the KiCad schematic and PCB files for the actual circuit implementation and board layout.

Tools and Software

The following tools and resources are used in this project:

  • KiCad — Electronic schematic capture and PCB design.
  • Git — Version control.
  • GitHub — Project hosting and version management.
  • Espressif Documentation — Technical documentation and component specifications.

Getting Started

1. Clone the Repository

Clone the project from GitHub using:

bash
git clone https://github.com/arm-n/ESP-WROOM-32-Development-Board.git

Navigate to the project directory:

bash
cd ESP-WROOM-32-Development-Board

2. Open the KiCad Project

  1. Install and launch KiCad.
  2. Open the KiCad Project Manager.
  3. Select File → Open Project.
  4. Navigate to the cloned repository.
  5. Open esp_wroom_32.kicad_pro.

3. Explore the Design

Schematic

Open the schematic editor to inspect the circuit diagram, components and electrical connections.

PCB Layout

Open the PCB editor to examine component placement, copper routing, board outline and PCB design.

Design Rule Check

The repository includes a DRC.rpt file containing the design rule check results from the time it was generated.

Run a fresh Design Rule Check (DRC) in KiCad before modifying, fabricating or using the PCB.

PCB Manufacturing Files

The gerber/ directory contains the PCB fabrication files generated from the KiCad PCB layout.

FileDescription
F_Cu.gbrFront copper layer
B_Cu.gbrBack copper layer
F_Mask.gbrFront solder mask
B_Mask.gbrBack solder mask
F_Paste.gbrFront solder paste
B_Paste.gbrBack solder paste
F_Silkscreen.gbrFront silkscreen
B_Silkscreen.gbrBack silkscreen
Edge_Cuts.gbrPCB board outline
PTH.drlPlated through-hole drill file
NPTH.drlNon-plated through-hole drill file
job.gbrjobGerber job configuration

Manufacturing Considerations

Before submitting the PCB for fabrication:

  1. Verify the schematic and PCB layout.
  2. Run the latest Electrical Rules Check (ERC) and Design Rules Check (DRC).
  3. Inspect component footprints, placement and routing.
  4. Verify the board outline and dimensions.
  5. Inspect the Gerber files using a Gerber viewer.
  6. Confirm that the drill files and fabrication outputs correspond to the latest PCB revision.
  7. Check the fabrication requirements of the selected PCB manufacturer.

Note: The included manufacturing files represent a saved design revision. Verify them before ordering a PCB, as they may not reflect subsequent design changes.

Design References

This project was developed using publicly available technical documentation and component datasheets for learning and design reference.

Datasheets

These documents provide technical specifications, electrical characteristics, pin information and other reference material relevant to the ESP32 platform.

Third-party documentation, designs, images and other materials retain their respective copyrights and licences.

Design Status

Current Status: Prototype

The repository contains the KiCad project files, schematic, PCB layout, Gerber manufacturing outputs, DRC report, datasheet and design screenshots.

The project is intended for educational purposes, hardware experimentation and PCB design practice.

Further review and validation are required before fabrication or use in a production application.

Licence

The licensing of this project is subject to the ownership and permissions applicable to its individual design contributions and included third-party materials.

The CERN Open Hardware Licence Version 2 — Permissive (CERN-OHL-P-2.0) is a potential licence for original hardware design contributions, provided the contributor has the necessary rights to distribute them under its terms.

Third-party materials, including any incorporated reference designs, schematics, PCB layouts, symbols, footprints, images and documentation, remain subject to their respective copyrights and licences.

Attribution alone does not grant permission to redistribute or relicense third-party material.

Refer to the LICENSE file, if included, for the applicable licence terms.

Author

Armaan

Hardware prototyping, KiCad schematic design and PCB development.

Disclaimer

This project is provided for educational, experimental and hardware prototyping purposes.

The design and associated manufacturing files are provided without a guarantee of fitness for a particular purpose.

Users should independently verify the circuit, component specifications, electrical characteristics, PCB layout, manufacturing outputs and safety requirements before fabrication or use.

Parts

26
QtyValueFootprintReferences
5100nFCapacitor_SMD:C_0402_1005MetricC1, C3, C4, C5, C6
310kResistor_SMD:R_0603_1608MetricR4, R5, R6
25.1kResistor_SMD:R_0603_1608MetricR1, R2
2Conn_01x15_PinConnector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_VerticalJ2, J3
2LEDLED_SMD:LED_0201_0603MetricD2, D3
2SS8050Package_TO_SOT_SMD:SOT-23Q1, Q2
2SW_PushButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW1, SW2
110uF / 16VCapacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-IC2
11kResistor_SMD:R_0603_1608MetricR3
1220Resistor_SMD:R_0603_1608MetricR7
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1B5819WDiode_SMD:D_SOD-123D1
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU3
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

Similar boards

  • 2 layers52 × 29 mmEsp32 wroom mudule, the printed circuit board in 3D

    Esp32 wroom mudule

    moksh-pcb-design/ESP32-WROOM-Development-Board

    Custom ESP32-WROOM-32 Development Board designed in KiCad 10 featuring USB Type-C, CH340C USB-UART interface, AMS1117 power regulation and auto-programming circuitry.

    26 parts2
  • 2 layers52 × 29 mmEsp32 wroom, the printed circuit board in 3D

    Esp32 wroom

    7205jmj/Custom-ESP32-WROOM-32-Development-Board

    Most ESP32 development boards available in the market include additional features that may not be required for every project.

    26 parts1
  • 2 layers52 × 30 mmEsp32wroom32, the printed circuit board in 3D

    Esp32wroom32

    Harshavar8jdm/esp32-wroom-32-dev-board

    26 parts1GPL-3.0
  • 2 layers50 × 35 mmEsp32 board, the printed circuit board in 3D

    Esp32 board

    Adichidrawar/electronics-assessment-IF

    Hardware design solution for the Intelligence Factory Hardware/Mechatronics Engineer take-home assessment. Includes a two-board ESP32-based embedded system with a remote IMU sensor board, complete PCB design in KiCad…

    27 parts
  • 2 layers48 × 41.9 mmXo DevBoard, the printed circuit board in 3D

    Xo DevBoard

    danielmcneto/Xo-DevBoard

    An ESP32 based DevBoard

    29 parts
  • 2 layers33 × 51.5 mmOrph32, the printed circuit board in 3D

    Orph32

    pizzalover125/orpheus32

    An ESP32 devboard made specifically for Hack Club!

    28 parts
  • 4 layersTubesPCB Wijdan, the printed circuit board in 3D

    TubesPCB Wijdan

    wijdanmkh-insk/Tasks

    This is my backups from my exercises and for fun coding. I don't like my files that messing around my main drive so instead save them in my computer, I save them here. It's just for fun.

    26 parts

Questions

How big is the Esp wroom 32 PCB?

It measures 52 × 29 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp wroom 32 use?

26 parts, built around the CH340C, ESP32-WROOM-32, AMS1117-3.3 and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp wroom 32 KiCad files?

From the arm-n/ESP-WROOM-32-Development-Board repository on GitHub, at the commit this page was made from: the board is esp_wroom_32.kicad_pcb and its schematic esp_wroom_32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp wroom 32 design in my own project?

Its repository states no licence, so its author keeps all rights: ask arm-n before reusing the design.