Skip to the content
2 layers55 × 55 mmDisplayBoard, the printed circuit board in 3D

A small project that combines ESP32 with a vintage Soviet Nixie tube from the 70’ to create an artistic clock. Originally developed on ESP8266/Arduino, now evolved to ESP32 with ESP-IDF for greater performance and stability.

Size
55 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
44
Pads
118
Tracks, vias
296, 37
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Apr 2020
Updated
18 Dec 2025

Overview

DisplayBoard is an open-source printed circuit board by Deni90, from the Deni90/singleDigitNixieClock repository on GitHub, published under the MIT licence. It is a 2-layer board of 55 × 55 mm with 38 parts on 44 nets, routed with 296 tracks and 37 vias.

It is built around the MMBTA42, BSS123 and WS2812B. Its parts include 17 resistors, 11 transistors, 2 capacitors, 1 IC and 1 diode. It belongs with the lEDs and displays and retro computing and games boards and the ESP32 boards of this library.

Main components

3

README

README.md

Single Digit Nixie Clock

A small project combining ESP32 with a vintage Soviet Nixie tube from the 70’ to create an artistic clock. Originally developed on ESP8266/Arduino, now evolved to ESP32 with ESP-IDF for greater performance and stability.

Huge thank you to PCBWay for sponsoring this project!

Single Digit Nixie Clock

For more details follow project logs on: my personal blog or hackaday.io

Some of the key features:

  • Shows current time (hours and minutes) on a single nixie tube.
  • Configurable RGB LED backlight lights up the nixie tube every second.
  • USB powered.
  • Hosts a web server for easy setup & configuration.
  • Synchronises time with NTP server.

Operating modes:

  • AP mode
    • This mode is hosting a dedicated open wifi network called NixieClock. Its main purpose is to use it for first time setup to update wifi configuration. In addition, this mode will be activated when the clock is not able to connect to a configured network. Clock hosts a captive portal. A configuration page will be opened automatically upon connecting to NixieClock network.
  • Client mode
    • In this mode the clock is connected to a configured wifi network. If there is internet access, the clock will synchronize its RTC with NTP server at startup and then every hour periodically.

In both modes, the configuration page is easily reachable on the following URL: <HOSTNAME>.local. There is no need to keep track of the IP address, the clock is hosting Multicast DNS (mDNS) server. mDNS is supported by Chrome and Safari browsers out of the box.

By default, the HOSTNAME is set to mynixieclock.

Firmware

This project started on ESP8266 with the Arduino framework, which was great for fast prototyping. However, the reliance on third-party libraries often led to instability and crashes.

To ensure long-term support and stability, the project was migrated from the now-obsolete ESP8266 to the ESP32, using ESP-IDF in C++.

This move provides:

  • A robust and stable firmware base.
  • Full access to ESP32’s hardware features.
  • Use of official ESP-IDF components

REST API

End pointMethodBody (JSON)Description
/api/v1/led/led_infoGET{
    “R”: <0-255>,
    “G”: <0-255>,
    “B”: <0-255>,
    “state”: <0-2>
}
Get color and state of the backlight (RGB LED).
/api/v1/led/led_infoPOST{
    “R”: <0-255>,
    “G”: <0-255>,
    “B”: <0-255>,
    “state”: <0-2>
}
Set color and state of the backlight (RGB LED).
/api/v1/clock/sleep_infoGET{
     “sleep_before”: <value>,
     “sleep_after”: <value>
}
Get sleep mode configuration. The time before and after (in minutes) the backlight will be turned off.
/api/v1/clock/sleep_infoPOST{
     “sleep_before”: <value>,
     “sleep_after”: <value>
}
Set sleep mode configuration.
/api/v1/clock/time_infoGET{
    "tz_zone": "<Geographic zone>",
    “tz_offset”: “<Proleptic TZ>",
    "time_format": <"12h" | "24h">
}
Get time zone configuration
/api/v1/clock/time_infoPOST{
    "tz_zone": "<Geographic zone>",
    “tz_offset”: “<Proleptic TZ>",
    "time_format": <"12h" | "24h">
}
Set time zone configuration
/api/v1/wifi/wifi_infoGET{
    "hostname": "<HOSTNAME>",
    “SSID”: “<Wifi SSID>”,
    "auth_type": <"open" | "wpa2" | "wpa3">,
    “password”: “<base64 encoded password>”
}
Get wifi configuration.
/api/v1/wifi/wifi_infoPOST{
    "hostname": "<HOSTNAME>",
    “SSID”: “<Wifi SSID>”,
    "auth_type": <"open" | "wpa2" | "wpa3">,
    “password”: “<base64 encoded password>”
}
Set wifi configuration.

Front-end layout & design

Initially, the front end was implemented with jQuery mobile. Reason for choosing this framework was in its simplicity. It provides a simple way to create and control user interface components. One thing that always annoyed me was its low response time. It took too much time to load jQuery, jQueryMobile and theme resources. On top of this, this slow response time caused WDT resets.

One more thing, I just realised that jQuery mobile project is deprecated since October 7, 2021. Huh, when it comes to web related technologies, it looks like I'm living under a rock...

To solve these issues, I opted to completely re implement the frontend using plain HTML, CSS and JavaScript. The end result looks almost the same as the previous design or even better. Responsiveness and stability increased significantly. The only drawback is now in maintenance and extension. It is required to implement everything manually.

Custom design of nixie clock's frontend

Design

Schematic and PCB are designed with KiCAD

Control board

Control board is basically a re-packaged generic ESP32 board design connected with DS3231 real time clock and NCH8200HV high voltage boost module board.

Schematic

Control board schematic

Display board

Display board uses a CD4028 BCD-to-decimal decoder. Its purpose is to reduce the number of required GPIO pins from 10 to just 4 for showing digits from 0 to 9. Compared to dedicated BCD to decimal decoder nixie drivers (like K511ID1), the CD4028 is a widely spread component and it is available in SMD package. Since CD4028 has a voltage range from 3.0V to 15V it is not compatible with nixie tube’s operating voltage of 170V out of the box. This problem is solved with MMBTA42, a high voltage transistor, rated to more than 200V.

The rest of the display board consists of a WS2812B RGB LED and a pin header used to connect with the control board.

Schematic

Display board schematic

PCB manufacturing

A representative from PCBWay contacted me because he was deeply impressed by my project and offered to sponsor a batch of PCBs to test out their services.

Since I recently moved to KiCad, it was a perfect opportunity to try out the PCBWay Plug-in for KiCad. It provides a simple way to place an order in just a few clicks. There is no need to bother with exporting gerber files, everything is automated. You just need to update the PCB specification and fill in the shipping information on the webpage. That’s it.

The entire journey from placing the order to receiving the package took less than a week. Incredible! PCBWay did a superb job, PCBs are amazing. I am more than impressed.

Assembled control and display PCBs for the Nixie clock

Enclosure design

3D model is made with Autodesk Fusion 360.

The end result is a simple box shaped design with holes for the nixie tube and USB connector.

3D model of the enclosure for nixie clock

Third-party dependencies

This project includes firmware/flash_data/frontend/zones.json from https://github.com/nayarsystems/posix_tz_db, licensed under the MIT License.

Resources

Parts

38
QtyValueFootprintReferences
104k7Resistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R10
10MMBTA42Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10
518kResistor_SMD:R_0603_1608MetricR12, R14, R15, R16, R17
4~MountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
2100nCapacitor_SMD:C_0603_1608MetricC1, C2
210kResistor_SMD:R_0603_1608MetricR11, R13
14028Package_SO:SO-16_3.9x9.9mm_P1.27mmU1
1BSS123Package_TO_SOT_SMD:SOT-23Q11
1Conn_01x10_PinConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ1
1IN-14displayBoard:IN-14N1
1WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1

More from Deni90/singleDigitNixieClock

1
  • 2 layers55 × 55 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    Deni90/singleDigitNixieClock

    A small project that combines ESP32 with a vintage Soviet Nixie tube from the 70’ to create an artistic clock. Originally developed on ESP8266/Arduino, now evolved to ESP32 with ESP-IDF for greater performance and…

    39 parts5MIT

Similar boards

  • 2 layers247.5 × 25 mmModule pcb, the printed circuit board in 3D

    Module pcb

    akaFunk/BlinkyBar

    Moduar LED light painting strip with 180 LEDs per meter

    106 parts1CC-BY-4.0
  • 2 layers85 × 56.5 mmModemHAT, the printed circuit board in 3D

    ModemHAT

    astuder/ModemHAT

    Classic Phone Modem HAT for the Raspberry Pi

    111 parts56
  • 2 layers120 × 70 mmBRNG, the printed circuit board in 3D

    BRNG

    valerionew/Banana-Random-Number-Generator

    Random number generator based on radioactivity from bananas

    93 parts37
  • 2 layers70 × 40 mmPOE, the printed circuit board in 3D

    POE

    reportingsjr/rfidBoard

    RFID/NFC board with ethernet+PoE with numerous I/Os.

    139 parts16
  • 2 layers137.2 × 30.5 mmPanaplex, the printed circuit board in 3D

    Panaplex

    74hc595/Panaplex-Clock

    Code/schematics for a clock using a Panaplex (planar gas discharge) display

    30 parts12BSD-3-Clause
  • 2 layers168.8 × 95.8 mmNixie clock, the printed circuit board in 3D

    Nixie clock

    alx-alexpark/nixie-clock

    ИН-12 Nixie Tube Clock built with Pico W and k155id1

    75 parts8
  • 4 layers58 × 58 mmBebop, the printed circuit board in 3D

    Bebop

    jonasblixt/bebop

    Power-over-ethernet BLE bridge

    245 parts7
  • 2 layers240 × 38.7 mmETAclock, the printed circuit board in 3D

    ETAclock

    drkmsmithjr/ETANixieClock

    An Estimated Time of Arrival Nixie Tube Clock Open Source Hardware Project

    126 parts6

Questions

How big is the DisplayBoard PCB?

It measures 55 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DisplayBoard use?

38 parts, built around the MMBTA42, BSS123 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DisplayBoard KiCad files?

From the Deni90/singleDigitNixieClock repository on GitHub, at the commit this page was made from: the board is hardware/displayBoard/displayBoard.kicad_pcb and its schematic hardware/controlBoard/controlBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DisplayBoard design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).