2 layers100.2 × 68.6 mm
Board MKIV
Demetrius-Ross/SimMonitor
Rename the main script to main.py '''bash mv espnowsenderrelay.py main.py '''
45 parts
2 layers83.4 × 77.2 mm
Schematic Mk3
Demetrius-Ross/SimMonitorRename the main script to main.py '''bash mv espnowsenderrelay.py main.py '''
- Size
- 83.4 × 77.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 58
- Pads
- 146
- Tracks, vias
- 169, 75
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Dec 2024
- Updated
- 7 Aug 2026
Overview
Schematic Mk3 is an open-source printed circuit board by Demetrius-Ross, from the Demetrius-Ross/SimMonitor repository on GitHub. It is a 2-layer board of 83.4 × 77.2 mm with 33 parts on 58 nets, routed with 169 tracks and 75 vias.
It is built around the REC5A-2405SW/H2/X1, LTV-846S and CR1206-FX-1002ELF, with the CRGH1206J4K7, UHE2A470MPD and DRR3016 among its other parts. Its parts include 18 resistors, 5 connectors, 3 capacitors, 2 ICs and 1 diode. It belongs with the ESP32 and NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
7
REC5A-2405SW/H2/X1
DIP,31.8x20.3mm1 18V~36V 1A 2kV 5V 5W 81% DIP,31.8x20.3mm Isolated Power Modules ROHSRECOM PowerIsolated Power Modules
LTV-846S
SMD-16P-30℃~+100℃ 1.2V 100mV@20mA,1mA 200mW 3us 4 4us 50% 50mA 50mA 5kV 600% 6V 80V DC SMD-16P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
CR1206-FX-1002ELF
1206-55℃~+155℃ 10kΩ 200V 250mW Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountCRGH1206J4K7
1206-55℃~+155℃ 4.7kΩ 500mW Thick Film Resistor ±100ppm/℃ ±5% 1206 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface MountUHE2A470MPD
插件,D10xL12.5mm-40℃~+105℃ 100V 10mm 12.5mm 47uF ±20% 插件,D10xL12.5mm Aluminum Electrolytic Capacitors - Leaded ROHSNichiconAluminum Electrolytic Capacitors - Leaded
DRR3016
插件插件 Rotary Encoders ROHSKnitter-switchCoded Rotary Switches
SS34B-HF
DO-214AA(SMB)-55℃~+150℃ 1 Independent 3A 40V 500uA@40V 550mV@3A 80A DO-214AA(SMB) Schottky Diodes ROHSComchipSchottky Diodes
README
README.mdSimMonitoring Overview WIP
Rename the main script to main.py '''bash mv espnow_sender_relay.py main.py '''
Flash it to the ESP32: '''bash mpremote connect /dev/ttyUSB0 fs cp main.py : '''
Reset the ESP32 to run it automatically: '''bash mpremote connect /dev/ttyUSB0 reset '''
If you want manual execution, you can run any script interactively: '''bash mpremote connect /dev/ttyUSB0 run gpio_test.py '''
Wiring Guide for Each ESP32 Device
ESP32 Device ID Configuration for Sender
Below is a quick reference for how to wire GPIO17, GPIO16, GPIO4, and GPIO2 to assign a device ID (0–15). Each pin is interpreted as a bit in the 4-bit ID, read in the order (Pin2=bit0, Pin4=bit1, Pin16=bit2, Pin17=bit3).
| Device ID | Binary (bit3..bit0) | Pin17 (bit3) | Pin16 (bit2) | Pin4 (bit1) | Pin2 (bit0) |
|---|---|---|---|---|---|
| 0 | 0000 | 0 (LOW) | 0 (LOW) | 0 (LOW) | 0 (LOW) |
| 1 | 0001 | 0 (LOW) | 0 (LOW) | 0 (LOW) | 1 (HIGH) |
| 2 | 0010 | 0 (LOW) | 0 (LOW) | 1 (HIGH) | 0 (LOW) |
| 3 | 0011 | 0 (LOW) | 0 (LOW) | 1 (HIGH) | 1 (HIGH) |
| 4 | 0100 | 0 (LOW) | 1 (HIGH) | 0 (LOW) | 0 (LOW) |
| 5 | 0101 | 0 (LOW) | 1 (HIGH) | 0 (LOW) | 1 (HIGH) |
| 6 | 0110 | 0 (LOW) | 1 (HIGH) | 1 (HIGH) | 0 (LOW) |
| 7 | 0111 | 0 (LOW) | 1 (HIGH) | 1 (HIGH) | 1 (HIGH) |
| 8 | 1000 | 1 (HIGH) | 0 (LOW) | 0 (LOW) | 0 (LOW) |
| 9 | 1001 | 1 (HIGH) | 0 (LOW) | 0 (LOW) | 1 (HIGH) |
| 10 | 1010 | 1 (HIGH) | 0 (LOW) | 1 (HIGH) | 0 (LOW) |
| 11 | 1011 | 1 (HIGH) | 0 (LOW) | 1 (HIGH) | 1 (HIGH) |
| 12 | 1100 | 1 (HIGH) | 1 (HIGH) | 0 (LOW) | 0 (LOW) |
| 13 | 1101 | 1 (HIGH) | 1 (HIGH) | 0 (LOW) | 1 (HIGH) |
| 14 | 1110 | 1 (HIGH) | 1 (HIGH) | 1 (HIGH) | 0 (LOW) |
| 15 | 1111 | 1 (HIGH) | 1 (HIGH) | 1 (HIGH) | 1 (HIGH) |
Notes
- GPIO2 is the least significant bit (bit0).
- GPIO17 is the most significant bit (bit3).
- Use 10kΩ resistors (or internal pulls) to pull each pin HIGH or LOW.
- For a Sender role, set GPIO18 = 0 (LOW) and GPIO19 = 0 (LOW). This yields
role_value = 0=>"SENDER".
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | CR1206-FX-1002ELF | footprints:RESC3216X75N | R9, R10, R11, R12, R13, R14, R15, R16, R17, R18 |
| 7 | CRGH1206J4K7 | footprints:RESC3115X65N | R1, R2, R3, R5, R6, R7, R8 |
| 2 | UHE2A470MPD | footprints:PCAP_10x12_5-THRU-ELECT_NCA | C1, C2 |
| 2 | ~ | footprints:PTC_RESET_FUSE | RF1, RF2 |
| 1 | 1000pf/3kV | footprints:CAPC3216X180N | C3 |
| 1 | 1770979 | footprints:PHOENIX_1770979 | J5 |
| 1 | A-DF_09_A_KG-T4S | footprints:ASSMANN_A-DF_09_A_KG-T4S | J1 |
| 1 | CRGH1206J4K7 | footprints:RESC3015X65N | R4 |
| 1 | DRR3016 | footprints:DRR3010 | S1 |
| 1 | ESP32-DEVKITC-32D | footprints:MODULE_ESP32-DEVKITC-32D | U1 |
| 1 | JST -SM | footprints:CONN_BM04B-SRSS-TB_SPK | J3 |
| 1 | LTV-846S | footprints:SOIC254P1016X460-16N | U2 |
| 1 | REC5A-2405SW_H2 | footprints:CONV_REC5A-2405SW_H2 | PS1 |
| 1 | S3B-EH | footprints:CONN_S3B-EH_JST | J4 |
| 1 | SS34B-HF | footprints:DO214AASMB_CIP-L | D1 |
| 1 | jst-power | footprints:PHOENIX_1757255 | J2 |
Questions
How big is the Schematic Mk3 PCB?
It measures 83.4 × 77.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Schematic Mk3 use?
33 parts, built around the REC5A-2405SW/H2/X1, LTV-846S, CR1206-FX-1002ELF and CRGH1206J4K7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Schematic Mk3 KiCad files?
From the Demetrius-Ross/SimMonitor repository on GitHub, at the commit this page was made from: the board is Hardware-Design/board_design_legacy/schematic_Mk3.kicad_pcb and its schematic Hardware-Design/board_MKIV/ESP-Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Schematic Mk3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Demetrius-Ross before reusing the design.
More from Demetrius-Ross/SimMonitor
5- 2 layers87 × 55.5 mm
Schematic Mk2
Demetrius-Ross/SimMonitor
Rename the main script to main.py '''bash mv espnowsenderrelay.py main.py '''
29 parts - 2 layers100 × 32 mm
Signal board
Demetrius-Ross/SimMonitor
Rename the main script to main.py '''bash mv espnowsenderrelay.py main.py '''
28 parts - 2 layers100 × 32 mm
ESP Board
Demetrius-Ross/SimMonitor
Rename the main script to main.py '''bash mv espnowsenderrelay.py main.py '''
19 parts - 2 layers100 × 120 mm
Board telemetry
Demetrius-Ross/SimMonitor
Rename the main script to main.py '''bash mv espnowsenderrelay.py main.py '''
13 parts
Similar boards
- 2 layers75 × 50 mm
SlidersOfSociety PCB
OE1KHZ/SlidersOfSociety-PCB
A CANbus controlled closed loop motor fader module based on Microchip's PIC18F25K83
26 partsMIT - 2 layers179.5 × 53.5 mm
- 4 layers151.1 × 71.1 mm
- 4 layers221.5 × 130.8 mm
MEP MAXI-85V-1-REV-2-Interface Board
JGilcreast/MetalHead
An opensource firmware and software drop-in replacement for the 85V Automatic Stirrup Bender by CRS Specialties Inc. ...short story behind the name...
407 parts - 2 layers21.5 × 49.5 mm
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915