
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

MicroPython & PCB Class 2022 repo.
0x01-class is an open-source printed circuit board by DC540-Nova, from the DC540-Nova/micropython-and-pcb-class-2022 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 111.8 × 73.7 mm with 7 parts on 42 nets, routed with 50 tracks and 0 vias.
It is built around the WS2812B. Its parts include 6 diodes and 1 IC. It belongs with the RP2040 boards of this library.

MicroPython & PCB Class 2022 repo.
Raspberry Pi Pico w/ Pre-Soldered Headers
Breadboard & Wires [updated link 2022-09-21]
Push Buttons
NeoPixel Ring
SSD1306 Display
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 111.8 × 73.7 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DC540-Nova/micropython-and-pcb-class-2022 repository on GitHub, at the commit this page was made from: the board is chapter_03_basic_PCB_design/0x01-class/0x01-class.kicad_pcb and its schematic chapter_03_basic_PCB_design/0x01-class/0x01-class.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).