
Electronic
slash4you/Anemometre-Girouette
Projet de construction DIY d'anémomètre et girouette connectés à Home Assistant

Bachelors PCB is an open-source printed circuit board by davidstrasak, from the davidstrasak/Bachelors_PCB repository on GitHub. It is a 2-layer board of 89 × 160.1 mm with 43 parts on 44 nets, routed with 216 tracks and 8 vias.
It is built around the DMN65D8L-7(ES), SK16 and G5LE-1A DC3, with the 0PTF0078P and WEMOS_D1_MINI_PRO4 among its other parts. It belongs with the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | DMN65D8L-7 | mosfet:SOT96P240X115-3N | Q_NchFET_1, Q_NchFET_2, Q_NchFET_3, Q_NchFET_4, Q_NchFET_5, Q_NchFET_6 |
| 6 | SK16 | schottky:DIOM5027X250N | D_sch_1, D_sch_2, D_sch_3, D_sch_4, D_sch_5, D_sch_6 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric | R_4k7_1, R_4k7_2, R_4k7_3, R_4k7_4 |
| 3 | G5LE-1 | type c relay:G5LE1DC3 | K_TypeCRel_4, K_TypeCRel_5, K_TypeCRel_6 |
| 3 | G5LE-1A_DC3 | type a relay:G5LE1A4DC5 | K_TypeARel_1, K_TypeARel_2, K_TypeARel_3 |
| 3 | MountingHole | MountingHole:MountingHole_3mm | H2, H3, H5 |
| 2 | Screw_Terminal_01x05 | 1x5 screw conn:1935190 | J_VFDconnectors_2, J_VFDconnectors_3 |
| 1 | 0PTF0078P | 600 mA fuse:0PTF0078P | Fuse_1500mA_1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C_10uF_2 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C_22uF_1 |
| 1 | 470uF | 470uF C:CAPPRD250W52D630H1250 | C_470uF_3 |
| 1 | 82103C 10uH | DCDC L:8200 | L_10uH_1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J_LCDconn_1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Local DI0 (onoff) | 1x4 screw conn:1935187 | SW_OnOff_2 |
| 1 | Local DI1 (incspeed) | 1x4 screw conn:1935187 | SW_IncSpeed_3 |
| 1 | Local DI2 (decspeed) | 1x4 screw conn:1935187 | SW_DecSpeed_4 |
| 1 | MountingHole | MountingHole:MountingHole_5mm | H1 |
| 1 | MountingHole | MountingHole:MountingHole_4mm | H4 |
| 1 | REC10K-2405SAW_H2 | dcdc converter:REC10K-AW | PS_DCDC_24V5V_1 |
| 1 | Screw_Terminal_01x02 | 1x2 screw conn:1729128 | J_24Vin+GND_1 |
| 1 | WeMos_D1_Mini_Pro | Module:WEMOS_D1_mini_light | U_WeMos_D1_Mini_Pro_1 |
| 1 | local/remote switch | 1x2 screw conn:1729128 | SW_LocRem_1 |

slash4you/Anemometre-Girouette
Projet de construction DIY d'anémomètre et girouette connectés à Home Assistant

Tonikiller10000/8BitProcessor
This is a series of boards witch make an functional 8 bit processor for educational purposes.



Caroma97/WT32-ETH01_PWM_Fan_Controller
esphome compartible dual fan controller

EdSmithe/meniscus-controller
Closed-loop meniscus pressure controller for inkjet printing: custom KiCad PCB, Arduino control firmware, Python GUI

citrineio/LEL-Detector
This project takes inspiration from my current job as a control and instrumentation engineer in the oil and gas industry.

It measures 89 × 160.1 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the DMN65D8L-7(ES), SK16, G5LE-1A DC3 and 0PTF0078P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the davidstrasak/Bachelors_PCB repository on GitHub, at the commit this page was made from: the board is PCB.kicad_pcb and its schematic PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask davidstrasak before reusing the design.