8 layers75 × 115 mm
8 layers245 × 129 mm
Squishy main panel
esden/squishy-hardware1Squishy hardware design files
- Size
- 245 × 129 mm
- Copper layers
- 8
- Thickness
- 1.62 mm
- Parts
- 1,155
- Nets
- 1,248
- Pads
- 4,998
- Tracks, vias
- 9,513, 2,628
- Pours
- 162
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Oct 2024
- Updated
- 2 Oct 2024
Overview
Squishy main panel is an open-source printed circuit board by esden, from the esden/squishy-hardware repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is an 8-layer board of 245 × 129 mm with 1,155 parts on 1,248 nets, routed with 9,513 tracks and 2,628 vias.
It is built around the ATSAMD09D14A-MU, AP3428DNTR-G1 and S80KS5122GABHI020, with the TPD4E02B04DQAR, 74HC1G02GW,125 and CRCW060310K0FKEAC among its other parts. Its parts include 330 capacitors, 240 resistors, 36 ICs, 36 diodes and 18 transistors. It belongs with the SAM D and SAM boards of this library.
Main components
12ATSAMD09D14A-MU
QFN-24-EP(4x4)-40℃~+85℃ 1.62V~3.63V 12bit 16KB 22 32 Bit 48MHz 4KB ARM Cortex-M0+ Built-in FLASH QFN-24-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AP3428DNTR-G1
UDFN2020-6-40℃~+85℃ 1 1.5MHz 1A 2.5V~5.5V 40uA 600mV~5.5V Adjustable Buck Buck Built-in UDFN2020-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
S80KS5122GABHI020
FBGA-24(6x8)FBGA-24(6x8) DRAM ROHSInfineon TechnologiesSRAM
TPD4E02B04DQAR
USON-10(1x2.5)-40℃~+125℃ 0.33pF 10nA 17W@8/20us 2A@8/20us 3.6V 7.5V 8.8V Bidirectional Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
74HC1G02GW,125
TSSOP-5-1.3mm-40℃~+125℃ 1 1.5V、3.15V、4.2V 1.9V、4.4V、5.9V 100mV、400mV、400mV 2 2.6mA 2.6mA 20uA 2V~6V 500mV、1.35V、1.8V 74HC 8ns@6V,50pF NOR Gate TSSOP-5-1.3mm Logic Gates ROHSNexperiaLogic Gates
CRCW060310K0FKEAC
0603-55℃~+155℃ 100mW 10kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountCRCW06034K70FKEAC
0603-55℃~+155℃ 100mW 4.7kΩ Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
UMK107BJ105KA-T
06031uF 50V X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMT
AC0201KRX7R8BB103
020110nF 25V X7R ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCRCW06032K20FKEAC
0603-55℃~+155℃ 100mW 2.2kΩ Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
150060VS75000
SMD,1.6x0.8mm-40℃~+85℃ 140° 2.4V 20mA 40mcd 570nm 572nm 72mW Discrete Diode Green SMD,1.6x0.8mm LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
CAY16-103J4LF
0603x410kΩ 4 62.5mW 8 ±200ppm/℃ ±5% 0603x4 Resistor Networks, Arrays ROHSBournsResistor Networks & Arrays
README
README.mdSquishy - Hardware
This repository contains the hardware design files for Squishy.
You can view a live rendering of the WIP hardware in your web browser here, thanks to KiCanvas.
[!IMPORTANT] If you're looking for the Squishy software/gateware, they can be found at
squishy-scsi/squishy.
Documentation
The documentation for the Squishy hardware can be found here.
License
The hardware design files for Squishy are licensed under the CERN-OHL-S, the license for which can be found in LICENSE
Parts
1,155| Qty | Value | Footprint | References |
|---|---|---|---|
| 174 | NPTH | NPTH | KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_10_5, KiKit_MB_10_6, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_11_5, KiKit_MB_11_6, KiKit_MB_12_1, KiKit_MB_12_2, KiKit_MB_12_3, KiKit_MB_12_4 +158 |
| 63 | 10k | rhais_rcl:R0603 | R4, R12, R12, R12, R17, R17, R17, R28, R28, R28, R32, R32, R32, R36, R36, R36 +47 |
| 51 | 100n | Capacitor_SMD:C_0201_0603Metric | C50, C50, C50, C52, C52, C52, C53, C100, C100, C100, C102, C102, C102, C106, C106, C106 +35 |
| 51 | 4k7 | rhais_rcl:R0603 | R22, R22, R22, R37, R37, R37, R38, R38, R38, R39, R39, R39, R44, R44, R44, R45 +35 |
| 48 | 100n | rhais_rcl:C0402 | C2, C2, C2, C3, C3, C3, C10, C10, C10, C31, C31, C31, C34, C34, C34, C35 +32 |
| 45 | 1u | rhais_rcl:C0603 | C17, C17, C17, C20, C20, C20, C21, C21, C21, C30, C30, C30, C39, C39, C39, C40 +29 |
| 36 | 100n | rhais_rcl:C0603 | C11, C11, C11, C13, C13, C13, C14, C14, C14, C19, C19, C19, C23, C23, C23, C25 +20 |
| 36 | 10n | Capacitor_SMD:C_0201_0603Metric | C51, C51, C51, C55, C55, C55, C58, C58, C58, C61, C108, C108, C108, C111, C111, C111 +20 |
| 27 | 2k2 | rhais_rcl:R0603 | R7, R24, R24, R24, R25, R25, R25, R26, R26, R26, R31, R31, R31, R34, R34, R34 +11 |
| 24 | 1u | Capacitor_SMD:C_0201_0603Metric | C63, C63, C63, C75, C75, C75, C76, C103, C103, C103, C104, C104, C104, C105, C105, C105 +8 |
| 21 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7, D7, D7, D8, D10, D10, D10, D11, D11, D11, D12, D12, D12, D16, D16, D16 +5 |
| 18 | 10K | rhais_rcl:R0603_Array_Concave_4 | R14, R14, R14, R35, R35, R35, R46, R46, R46, R48, R48, R48, R50, R50, R50, R66 +2 |
| 18 | 1n | Capacitor_SMD:C_0201_0603Metric | C56, C56, C56, C59, C59, C59, C62, C62, C62, C85, C109, C109, C109, C112, C112, C112 +2 |
| 18 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID1, FID1, FID2, FID2, FID2, FID3, FID3, FID3, FID4, FID4, FID4, FID5, FID5, FID5, FID6 +2 |
| 15 | 1k | rhais_rcl:R0603 | R1, R1, R1, R21, R21, R21, R23, R23, R23, R27, R27, R27, R42, R42, R42 |
| 15 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP3, TP3, TP5, TP5, TP5, TP7, TP7, TP7, TP9, TP9, TP9, TP12, TP12, TP12 |
| 12 | 10n | rhais_rcl:C0603 | C1, C1, C1, C15, C15, C15, C18, C18, C18, C22, C22, C22 |
| 12 | 10u | rhais_rcl:C0603 | C16, C16, C16, C46, C46, C46, C89, C89, C89, C93, C93, C93 |
| 12 | 10u | rhais_rcl:C0805 | C27, C27, C27, C29, C29, C29, C32, C32, C32, C33, C33, C33 |
| 12 | HyperRAM | lethalbit-memory:TFBGA-24-6x8mm-1.0mm | U2, U2, U2, U3, U3, U3, U14, U14, U14, U15, U15, U15 |
| 12 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H1, H1, H2, H2, H2, H3, H3, H3, H4, H4, H4 |
| 12 | NX6008NBKR | Package_TO_SOT_SMD:SOT-23 | Q2, Q2, Q2, Q3, Q3, Q3, Q4, Q4, Q4, Q5, Q5, Q5 |
| 6 | 0 | rhais_rcl:R0402 | R29, R29, R29, R30, R30, R30 |
| 6 | 100 | rhais_rcl:R0402 | R11, R11, R11, R13, R13, R13 |
| 6 | 100k | rhais_rcl:R0603 | R19, R19, R19, R20, R20, R20 |
| 6 | 1M | rhais_rcl:R0603 | R8, R8, R8, R41, R41, R41 |
| 6 | 300p | rhais_rcl:C0603 | C49, C49, C49, C91, C91, C91 |
| 6 | 4u7 | rhais_rcl:C0402 | C64, C64, C64, C71, C71, C71 |
| 6 | 50m | rhais_rcl:R0805 | R52, R52, R52, R53, R53, R53 |
| 6 | 600 @ 100MHz | rhais_rcl:R0805 | FB2, FB2, FB2, FB3, FB3, FB3 |
| 6 | 7A | Fuse:Fuse_1206_3216Metric | F1, F1, F1, F2, F2, F2 |
| 6 | BLUE | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D2, D2, D6, D6, D6 |
| 6 | DMN65D8L-7 | Package_TO_SOT_SMD:SOT-23 | Q8, Q8, Q8, Q9, Q9, Q9 |
| 6 | Fiducial | Fiducial | KiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3 |
| 6 | PINK | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D3, D3, D5, D5, D5 |
| 6 | TPD4E02B04DQA | rhais_package-qfn:USON-10_2.5x1.0mm_P0.5mm | U6, U6, U6, U8, U8, U8 |
| 6 | TPS7A1112PDRVT | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U16, U16, U16, U20, U20, U20 |
| 3 | 100MHz | lethalbit:AK3A-xxxMHz | X1, X1, X1 |
| 3 | 10m | rhais_rcl:R0603 | R16, R16, R16 |
| 3 | 12n | rhais_rcl:C0402 | C26, C26, C26 |
| 3 | 13MHz | rhais_osc:SMD2520 | X2, X2, X2 |
| 3 | 150k | rhais_rcl:R0603 | R43, R43, R43 |
| 3 | 178k | rhais_rcl:R0603 | R57, R57, R57 |
| 3 | 1u | lethalbit-inductor:L_Vishay_IHLP-3232 | L3, L3, L3 |
| 3 | 1u5 | lethalbit-inductor:Bourns-SRF1260 | L1, L1, L1 |
| 3 | 1v2 | TestPoint:TestPoint_Pad_D1.0mm | TP11, TP11, TP11 |
| 3 | 1v2A | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP2, TP2 |
| 3 | 1v8 | TestPoint:TestPoint_Pad_D1.0mm | TP13, TP13, TP13 |
| 3 | 200MHz | lethalbit:AK2A-xxxMHz | X3, X3, X3 |
| 3 | 22p | rhais_rcl:C0603 | C90, C90, C90 |
| 3 | 22u | rhais_rcl:C0603 | C101, C101, C101 |
| 3 | 24.25V @ 120mA | Diode_SMD:D_SOD-323 | D13, D13, D13 |
| 3 | 249k | rhais_rcl:R0603 | R55, R55, R55 |
| 3 | 2u2 | Capacitor_SMD:C_1812_4532Metric | C28, C28, C28 |
| 3 | 2u2 | rhais_rcl:L0603 | L2, L2, L2 |
| 3 | 2u2 | rhais_rcl:C0603 | C24, C24, C24 |
| 3 | 2v5 | TestPoint:TestPoint_Pad_D1.0mm | TP4, TP4, TP4 |
| 3 | 300k | rhais_rcl:R0603 | R33, R33, R33 |
| 3 | 39k2 | rhais_rcl:R0603 | R56, R56, R56 |
| 3 | 3v3 | TestPoint:TestPoint_Pad_D1.0mm | TP6, TP6, TP6 |
| 3 | 40k | rhais_rcl:R0603 | R18, R18, R18 |
| 3 | 40k2 | rhais_rcl:R0402 | R3, R3, R3 |
| 3 | 47u | lethalbit:C_Elec_KEMET_EB | C94, C94, C94 |
| 3 | 48MHz | rhais_osc:SMD3225 | X4, X4, X4 |
| 3 | 4u7 | rhais_rcl:C0603 | C12, C12, C12 |
| 3 | 52R3 | rhais_rcl:R0603 | R47, R47, R47 |
| 3 | 5V | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP1, TP1 |
| 3 | 5k36 | rhais_rcl:R0603 | R15, R15, R15 |
| 3 | 74AHC1G02 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U24, U24, U24 |
| 3 | 80k6 | rhais_rcl:R0402 | R2, R2, R2 |
| 3 | 820p | rhais_rcl:C0402 | C38, C38, C38 |
| 3 | 8k06 | rhais_rcl:R0603 | R10, R10, R10 |
| 3 | AP3428/A | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1.01x1.7mm | U21, U21, U21 |
| 3 | APX811-40UG-7 | Package_TO_SOT_SMD:SOT-143 | U4, U4, U4 |
| 3 | ATSAMD09D14A-M | rhais_package-qfn:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U11, U11, U11 |
| 3 | Antifaschistische_Aktion | lethalbit-graphics:Antifaschistische Aktion_600dpi | G1, G1, G1 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J1, J1 |
| 3 | DC Polarity | lethalbit-graphics:DC-Center-Positive | G8, G8, G8 |
| 3 | DFU | rhais_button-smd:B3U-1000P-B | SW2, SW2, SW2 |
| 3 | FLASH | lethalbit-connectors:FTSH-105-01-L-DV-K-TR | J8, J8, J8 |
The 951 most common of 1,155 parts.
More from esden/squishy-hardware
10- 6 layers75 × 55 mm
- 4 layers85 × 85 mm
- 4 layers121.4 × 109.4 mm
- 6 layers75 × 55 mm
- 6 layers75 × 55 mm
- 6 layers75 × 34 mm
- 6 layers75 × 34 mm
- 6 layers75 × 34 mm
- 6 layers75 × 34 mm
Similar boards
- 14 layers55 × 40 mm
Polarfire som
antmicro/polarfire-som
System on Module based on Microchip PolarFire MPFS250T SoC
473 parts48Apache-2.0 - 4 layers100 × 70 mm
- 4 layers45.5 × 52 mm
- 4 layers160 × 90 mm
- 6 layers450 × 235 mm
Baseline
DeadlySIn777/Controller
Unfinished CNC controller motherboard: native KiCad sources, rules, DSN and global routing review
2,723 parts - 4 layers188.3 × 49.3 mm
Sound Sensor Teensy Carrier
forrestrae/teensy-sound-sensor-pcb
A KiCad 9.0 carrier board for the Teensy 4.x microcontroller, designed for real-time audio sensing with USB-C Power Delivery input, 4S Li-ion battery management, I2S MEMS microphone, and LED lighting outputs.
257 partsApache-2.0 - 6 layers108 × 158.8 mm
Gk pcbv3
jncronin/gk
This respository provides PCB schematics, firmware and debugging support for the gkv4 handheld game console and its operating system, gkos. For the original STM32H7S7-based gk, see README-v3.md.
289 parts79 - 4 layers90 × 65 mm
Final chain
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
37 parts3MIT
Questions
How big is the Squishy main panel PCB?
It measures 245 × 129 mm and has 8 copper layers, 1.62 mm thick.
What parts does the Squishy main panel use?
1,155 parts, built around the ATSAMD09D14A-MU, AP3428DNTR-G1, S80KS5122GABHI020 and TPD4E02B04DQAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Squishy main panel KiCad files?
From the esden/squishy-hardware repository on GitHub, at the commit this page was made from: the board is panels/squishy/squishy-main-panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Squishy main panel design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).