
WT32-ETH01 PWM Fan Controller V1
Caroma97/WT32-ETH01_PWM_Fan_Controller
esphome compartible dual fan controller

esphome compartible dual fan controller
WT32-ETH01 PWM Fan Controller is an open-source printed circuit board by Caroma97, from the Caroma97/WT32-ETH01_PWM_Fan_Controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 84 × 57.8 mm with 26 parts on 33 nets, routed with 132 tracks and 7 vias.
It is built around the 0PTF0078P and BC547. Its parts include 8 resistors, 6 connectors, 3 ICs, 2 capacitors and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 3,3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R4, R5, R6, R8 |
| 2 | 0,1n | Capacitor_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C1, C2 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H3 |
| 1 | 0PTF0078P | Library:0PTF0078P | U3 |
| 1 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 2071556-3 | Library:20715563 | K1 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | Conn_01x04_Male | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J2 |
| 1 | FAN1 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | FAN2 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Flash | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Programming Port | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | WT32_ETH01 | haus-automatisierung:WT32_ETH01 | U1 |
| 1 | ~ | SamacSys_Parts:2596S-ADJ_3A_DC-DC_Step_Down_Buck_Power_Module | U2 |
The 25 most common of 26 parts.

Caroma97/WT32-ETH01_PWM_Fan_Controller
esphome compartible dual fan controller



EdSmithe/meniscus-controller
Closed-loop meniscus pressure controller for inkjet printing: custom KiCad PCB, Arduino control firmware, Python GUI

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

It measures 84 × 57.8 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the 0PTF0078P and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Caroma97/WT32-ETH01_PWM_Fan_Controller repository on GitHub, at the commit this page was made from: the board is PCB/WT32-ETH01_PWM_Fan_Controller.kicad_pcb and its schematic PCB/WT32-ETH01_PWM_Fan_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).