2 layers165.1 × 66 mm
Selector8x16
DavidMFlynn/VideoSelector
Sets camera to monitor connections, RS-232, Extron Electronics MAV 88, PIC16F1847.
113 parts1GPL-3.0
2 layers24.8 × 22.9 mm
Switch16
DavidMFlynn/VideoSelector1Sets camera to monitor connections, RS-232, Extron Electronics MAV 88, PIC16F1847.
- Size
- 24.8 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 6
- Pads
- 23
- Tracks, vias
- 58, 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20160815)
- Created
- 2 Mar 2017
- Updated
- 18 May 2017
Overview
Switch16 is an open-source printed circuit board by DavidMFlynn, from the DavidMFlynn/VideoSelector repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 24.8 × 22.9 mm with 6 parts on 6 nets, routed with 58 tracks and 3 vias.
It is built around the RJ45. Its parts include 4 resistors and 2 connectors.
Main components
1README
README.mdVideoSelector
Sets camera to monitor connections, RS-232, Extron Electronics MAV 88, PIC16F1847. Created by David M. Flynn 2017 I could find one, so I built one. The main pcb and selector switch pcbs are connected by ethernet patch cables. Each station can select (with a gray code rotory encoder) which cammera to view. Box 3D has a 3D printable box.
The PCBs are made with kicad. Two of the wires on port 2 are swapped, fixed in software. I know its unlikely anyone will want one, but it makes a good example project.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05 | P1 |
| 1 | RJ45 | E5J88RJ45:E5J88 | J1 |
More from DavidMFlynn/VideoSelector
1Similar boards
- 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm
Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm
- 2 layers50 × 55.4 mm
- 2 layers67.9 × 47.8 mm
Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0 - 4 layers90 × 75 mm
- 4 layers73.9 × 84.5 mm
Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51 - 2 layers99 × 60 mm
Pwr
mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
64 parts46
Questions
How big is the Switch16 PCB?
It measures 24.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Switch16 use?
6 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Switch16 KiCad files?
From the DavidMFlynn/VideoSelector repository on GitHub, at the commit this page was made from: the board is SwitchPCB/Switch16.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Switch16 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).