2 layers63.5 × 48.3 mm
SimpleServoCtrl
DavidMFlynn/SimpleServoCtrl16
PIC16F1847 based R/C servo controller, 16 channels.
55 parts1
2 layers94 × 66 mm
SimpleServoCtrl
DavidMFlynn/SimpleServoCtrl161PIC16F1847 based R/C servo controller, 16 channels.
- Size
- 94 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 56
- Pads
- 197
- Tracks, vias
- 361, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Nov 2015
- Updated
- 15 Apr 2021
Overview
SimpleServoCtrl is an open-source printed circuit board by DavidMFlynn, from the DavidMFlynn/SimpleServoCtrl16 repository on GitHub. It is a 2-layer board of 94 × 66 mm with 54 parts on 56 nets, routed with 361 tracks and 13 vias.
It is built around the PIC16F1847-E/P and 78L05. Its parts include 24 resistors, 9 connectors, 6 capacitors, 4 diodes and 3 ICs. It belongs with the PIC boards of this library.
Main components
2
PIC16F1847-E/P
PDIP-18-40℃~+125℃ 1.8V~5.5V 10bit 14KB 15 1KB 256Byte 32MHz 8 Bit Built-in FLASH PIC PDIP-18 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
78L05
SOT-89-3-20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 220Ω | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 6 | CONN_8 | Pin_Headers:Pin_Header_Straight_1x08 | P1A1, P1B1, P1C1, P2A1, P2B1, P2C1 |
| 5 | 47KΩ | Resistors_SMD:R_0805_HandSoldering | R18, R20, R22, R23, R24 |
| 4 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C3, C4, C5, C6 |
| 3 | 470Ω | Resistors_SMD:R_0805_HandSoldering | R17, R19, R21 |
| 3 | LED | LEDs:LED-1206 | D1, D2, D3 |
| 3 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1, SW2, SW3 |
| 2 | 74LS237 | Housings_DIP:DIP-16__300 | U2, U3 |
| 2 | MountingHole_3-7mm | Mounting_Holes:MountingHole_3-7mm | H1, H2 |
| 1 | 2.2uF | Capacitors_Elko_ThroughHole:Elko_vert_11x5mm_RM2.5 | C2 |
| 1 | 220uF | Capacitors_Elko_ThroughHole:Elko_vert_20x10mm_RM5_CopperClear | C1 |
| 1 | 78L05 | Discret:LM78XXV | VR1 |
| 1 | CONN_01X04 | Connect:bornier4 | P5 |
| 1 | DIODE | SMD_Packages:SMD-2010_Pol | D4 |
| 1 | I2C | Pin_Headers:Pin_Header_Straight_1x03 | P4 |
| 1 | Jumper_NO_Small | Pin_Headers:Pin_Header_Straight_1x02 | JP1 |
| 1 | PIC16F1847 | Housings_DIP:DIP-18__300 | U1 |
| 1 | Prog | Pin_Headers:Pin_Header_Straight_1x05 | P3 |
| 1 | Symbol_OSHW-Logo_SilkScreen | Symbols:Symbol_OSHW-Logo_SilkScreen | SIM1 |
Questions
How big is the SimpleServoCtrl PCB?
It measures 94 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SimpleServoCtrl use?
54 parts, built around the PIC16F1847-E/P and 78L05. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SimpleServoCtrl KiCad files?
From the DavidMFlynn/SimpleServoCtrl16 repository on GitHub, at the commit this page was made from: the board is SimpleServoPCB/SimpleServoCtrl.kicad_pcb and its schematic SimpleServoPS_PCB/SimpleServoCtrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SimpleServoCtrl design in my own project?
Its repository states no licence, so its author keeps all rights: ask DavidMFlynn before reusing the design.
More from DavidMFlynn/SimpleServoCtrl16
1Similar boards
- 2 layers35.6 × 33 mm
Sega adapter
eyvind/sega-adapter
Sega Megadrive controller adapter for 8-bit Atari computers
7 parts11MIT - 2 layers127 × 81.3 mm
- 2 layers36.8 × 34.7 mm
Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 2 layers51.8 × 32.6 mm
C64-rf modulator replacement
mbarszcz-pcb/c64-rf-modulator-replacement
C64 Composite/S-Video RF Modulator Replacement
33 parts86MIT - 2 layers86.4 × 69.9 mm
- 2 layers106 × 95.4 mm
- 2 layers41.1 × 110.7 mm
- 2 layers99.1 × 63.5 mm
