Skip to the content
2 layers127 × 81.3 mmNerfCanonLights, the printed circuit board in 3D

PIC16F1847, 24 Bit Output PCB

Size
127 × 81.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
145
Nets
142
Pads
414
Tracks, vias
832, 72
Routed
Yes
KiCad
KiCad 4
Created
22 Apr 2015
Updated
22 Apr 2015

Overview

NerfCanonLights is an open-source printed circuit board by DavidFlynn, from the DavidFlynn/NerfCannonLights repository on GitHub. It is a 2-layer board of 127 × 81.3 mm with 145 parts on 142 nets, routed with 832 tracks and 72 vias.

It is built around the PIC16F1847-E/P and 74LS259DC. Its parts include 76 resistors, 26 diodes, 24 transistors, 7 capacitors and 5 connectors. It belongs with the PIC boards of this library.

Main components

2

README

README.md

NerfCannonLights

PIC16F1847, 24 Bit Output PCB

NerfCannonLights receives a pulse from the gun controller and flashes the lights down the barrel. Open Source GPL v2

Based on a PIC16F1847 and using 3 74HC259 addressable latches to drive transistor outputs.

7 to 24VDC input I2C is optional, but not used in this version. 200mA per output, 2 amp total for the PCB.

David Flynn dflynn@oxfordvue.com (w) +1-626-256-6557 (m) +1-626-893-6654 Oxford V.U.E., Inc. 11711 Clark Street #108 Arcadia, CA 91006 USA

Parts

145
QtyValueFootprintReferences
251KΩResistors_SMD:R_0805_HandSolderingR2, R10, R12, R14, R16, R18, R20, R22, R24, R26, R28, R30, R32, R34, R36, R38 +9
25LEDLEDs:LED-1206D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9
242N7000Discret:TO92DGSQ1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +8
24470ΩResistors_SMD:R_0805_HandSolderingR53, R54, R55, R56, R57, R58, R59, R60, R61, R62, R63, R64, R65, R66, R67, R68 +8
2447ΩResistors_SMD:R_0805_HandSolderingR1, R3, R11, R13, R15, R17, R19, R21, R23, R25, R27, R29, R31, R33, R35, R37 +8
50.1uFCapacitors_SMD:C_0805_HandSolderingC2, C3, C4, C5, C6
34.7KΩResistors_SMD:R_0805_HandSolderingR50, R51, R52
374LS259Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mmU2, U3, U4
3CONN_8X2Pin_Headers:Pin_Header_Straight_2x08P3, P4, P5
2MountingHole_3-7mmMounting_Holes:MountingHole_3-7mmH1, H2
110uFCapacitors_Elko_ThroughHole:Elko_vert_11.5x8mm_RM3.5C7
12.2uFCapacitors_ThroughHole:C_Radial_D5_L6_P2.5C1
17805Discret:LM78XXVVR1
1CONN_2Connect:bornier2P1
1CONN_3Connect:bornier3P2
1DIODEDiodes_SMD:Diode-SMA_HandsolderingD26
1PIC16F1847Housings_DIP:DIP-18__300U1

Similar boards

  • 2 layers35.6 × 33 mmSega adapter, the printed circuit board in 3D

    Sega adapter

    eyvind/sega-adapter

    Sega Megadrive controller adapter for 8-bit Atari computers

    7 parts11MIT
  • 2 layers94 × 66 mmSimpleServoCtrl, the printed circuit board in 3D

    SimpleServoCtrl

    DavidMFlynn/SimpleServoCtrl16

    PIC16F1847 based R/C servo controller, 16 channels.

    54 parts1
  • 2 layers365.1 × 203.2 mmDIAG, the printed circuit board in 3D

    DIAG

    Nakazoto/CenturionComputer

    This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.

    150 parts172
  • 4 layers330.2 × 215.9 mmRetroii, the printed circuit board in 3D

    Retroii

    jonthomasson/retroii

    Retro ][ is a 6502 based computer based off of the Apple ][.

    302 parts33
  • 2 layers188 × 193 mm6800sbc, the printed circuit board in 3D

    6800sbc

    jefftranter/6800

    Code related to the Motorola 6800 microprocessor.

    164 parts32
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers236.8 × 169.8 mmTK2000, the printed circuit board in 3D

    TK2000

    clemarfolly/Microdigital-TK2000

    Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II

    212 parts17
  • 2 layers364 × 203 mmCPU6S, the printed circuit board in 3D

    CPU6S

    Meisaka/CenMiniCom

    Centurion Minicomputer Schematics

    240 parts8

Questions

How big is the NerfCanonLights PCB?

It measures 127 × 81.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the NerfCanonLights use?

145 parts, built around the PIC16F1847-E/P and 74LS259DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NerfCanonLights KiCad files?

From the DavidFlynn/NerfCannonLights repository on GitHub, at the commit this page was made from: the board is NerfCanonLightsPCB/NerfCanonLights.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the NerfCanonLights design in my own project?

Its repository states no licence, so its author keeps all rights: ask DavidFlynn before reusing the design.