

DCC Detector
Serial Model Railroad Control
- Size
- 82.6 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 37
- Pads
- 140
- Tracks, vias
- 328, 35
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Mar 2025
- Updated
- 2 Oct 2026
Overview
DCC Detector is an open-source printed circuit board by DavidMFlynn, from the DavidMFlynn/SerialMRRC repository on GitHub, published under the MIT licence. It is a 2-layer board of 82.6 × 25.4 mm with 57 parts on 37 nets, routed with 328 tracks and 35 vias.
It is built around the LM358AM and 1N4148W. Its parts include 33 resistors, 9 capacitors, 7 diodes, 3 ICs and 2 transistors. It belongs with the interfaces and adapters boards of this library.
Main components
2LM358AM
SOIC-8-16V~-1.5V、1.5V~16V 0℃~+70℃ 1MHz 1mA 2 20mA 2mV 3V~32V 45nA 5nA 7uV/℃ 85dB Built-in compensation SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
README
README.mdSerialMRRC
Serial Model Railroad Control
This is a set of PCBs and software to control a model railroad with RS485 data buss.
Stand Alone Boards
Controller Board, PIC15F15345, 1KB Ram, 224B Flash, 8KW Program memory Switch Machine, 1 servo, 1 DPDT relay Switch Machine and Signals, 1 servo, 1 DPDT relay, 5 Signal heads
Daughter Cards
USB Daughter Board Input 32 Daughter Bouad, 32 Pull-to-Ground inputs Output 32 Daughter Board, 32 Open collector Pull-to-Ground outputs Lighting 8x Transistot Outputs, +12v resistor current limited outputs
Anamation Controller, 8 servos Block Detector, detects voltage across diode/resistor Optical Detector, broken beam or reflected beam
USB Operation
When a command packet is received from RX2 (USB): Source=Master, Destination=Me: Parse and Process the command. Send any requested data back to Master on TX2 (USB). Source=Master, Destination<>Me: Retransmit on TX1 (RS485)
When a command packet is received from RX1 (RS485): Source=any, Destination=Me: Parse and Process the command. Send any requested data back to the sender on TX1 (RS485). Source=any, Destination=Master: Retransmit on TX2 (USB) Source=any, Destination= other than Master or Me do nothing.
Node (w/o USB)
When a command packet is received from RX1 (RS485): Source=any, Destination=Me: Parse and Process the command. Send any requested data back to the sender on TX1 (RS485). Source=any, Destination<>Me do nothing.
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R13, R14, R15, R16, R18, R20, R21, R22, R28, R29, R30, R31 |
| 6 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R17, R19 |
| 4 | .01uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C9 |
| 4 | .1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C5 |
| 4 | 1N4148W | Diode_SMD:D_SOD-123 | D3, D4, D5, D6 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11, R12 |
| 4 | 220K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R25, R26, R27 |
| 3 | LM358AM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3 |
| 2 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R33 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 1206 LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 2.2uf | Capacitor_SMD:CP_Elec_3x5.3 | C10 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 6V 500mW | Diode_SMD:D_SMA_Handsoldering | D2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J1 |
| 1 | D_ALT | Diode_SMD:D_SMA_Handsoldering | D7 |
More from DavidMFlynn/SerialMRRC
11- 2 layers66 × 117 mm

- 2 layers66 × 117 mm

- 2 layers166.4 × 83.8 mm

- 2 layers98 × 68 mm

- 2 layers95.4 × 54.4 mm

- 2 layers55 × 60 mm

- 2 layers60 × 60 mm

- 2 layers60 × 60 mm

- 2 layers36 × 40 mm

- 2 layers60 × 60 mm

- 2 layers60 × 60 mm

Similar boards
- 2 layers92.7 × 33 mm

- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers208.8 × 396.9 mm

Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm

- 4 layers95.6 × 73.6 mm

- 2 layers141.5 × 83 mm

Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm

- 2 layers99.1 × 90.7 mm

Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108
Questions
How big is the DCC Detector PCB?
It measures 82.6 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DCC Detector use?
57 parts, built around the LM358AM and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DCC Detector KiCad files?
From the DavidMFlynn/SerialMRRC repository on GitHub, at the commit this page was made from: the board is Dual Detector Module/PCB/DCC_Detector.kicad_pcb and its schematic Block Relay PCB/BlockRelay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DCC Detector design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).