

ESP8266 LED controller
DIY LEd Strip Controller with ESP-12E
- Size
- 42 × 45.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 20
- Pads
- 110
- Tracks, vias
- 230, 19
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Jul 2019
- Updated
- 30 Jul 2019
Overview
ESP8266 LED controller is an open-source printed circuit board by daumemo, from the daumemo/DIY-ESP-12E-LED-Strip-Controller-4-Channel repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 42 × 45.1 mm with 31 parts on 20 nets, routed with 230 tracks and 19 vias.
It is built around the ESP-12E, MC34063 and IRLR2905, with the SS14 among its other parts. Its parts include 12 resistors, 6 capacitors, 4 transistors, 4 connectors and 2 ICs. It belongs with the ESP8266 boards of this library.
Main components
4ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesMC34063
SOP-80℃~+70℃@(TA) 1 33kHz 3V~40V Adjustable Buck、Boost Built-in Inverting No SOP-8 DC-DC Converters ROHSHXY MOSFETDC-DC ConvertersIRLR2905
TO-252MOSFETsTECH PUBLICSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
KiCad/README.mdDIY-ESP-12E-LED-Strip-Controller-4-Channel
Here are the KiCad project files. Project was created with 4.0.6 version. PART_LIST.csv contains all parts needed for the project
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4k7 | Resistors_SMD:R_0603 | R1, R2, R3, R4, R8 |
| 4 | 10k | Resistors_SMD:R_0603 | R9, R10, R11, R12 |
| 4 | IRLR2905 | TO_SOT_Packages_SMD:TO-252-2 | Q1, Q2, Q3, Q4 |
| 2 | 100n | Capacitors_SMD:C_0603 | C3, C4 |
| 2 | out1 | Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm | P1, P4 |
| 1 | 100u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Hand | C5 |
| 1 | 100u | Capacitors_ThroughHole:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 1R5 | Resistors_SMD:R_0603 | R5 |
| 1 | 220p | Capacitors_SMD:C_0603 | C2 |
| 1 | 2u | Capacitors_SMD:C_0603 | C6 |
| 1 | 330u | Inductors:Inductor_Wurth_HCI-5040 | L1 |
| 1 | 3k6 | Resistors_SMD:R_0603 | R6 |
| 1 | 5k6 | Resistors_SMD:R_0603 | R7 |
| 1 | ESP-12E | User2016:Esp-12E | U2 |
| 1 | MC34063 | Housings_SOIC:SO-8_5.3x6.2mm_Pitch1.27mm | U1 |
| 1 | Out+ | Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm | P2 |
| 1 | PWR | Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm | P3 |
| 1 | Res | Buttons_Switches_ThroughHole:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | SW1 |
| 1 | ss14 | Diodes_SMD:D_SMA | D1 |
Similar boards
- 2 layers210 × 145 mm

- 2 layers100 × 95 mm

- 2 layers100 × 60 mm

- 2 layers150 × 100 mm

- 4 layers135.2 × 46.8 mm

Gd power supply board pcb
baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!
161 parts33MIT - 2 layers150 × 95 mm

- 2 layers44.5 × 37.9 mm

PetPull v3
Fremen72/MiniPetPull
Recycler PET plastic bottles into filament for 3D printer
14 partsGPL-3.0 - 2 layers99.1 × 92.1 mm

Questions
How big is the ESP8266 LED controller PCB?
It measures 42 × 45.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP8266 LED controller use?
31 parts, built around the ESP-12E, MC34063, IRLR2905 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP8266 LED controller KiCad files?
From the daumemo/DIY-ESP-12E-LED-Strip-Controller-4-Channel repository on GitHub, at the commit this page was made from: the board is KiCad/ESP8266_LED_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP8266 LED controller design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).