
ESP8266 LED controller
daumemo/DIY-ESP-12E-LED-Strip-Controller-4-Channel
DIY LEd Strip Controller with ESP-12E

Exposure unit for making PCBs
UV Exposer is an open-source printed circuit board by Shaman7312, from the Shaman7312/UV-Exposure repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 150 × 100 mm with 94 parts on 70 nets, routed with 836 tracks and 22 vias.
It is built around the MC34063, MMBT3904 and 2SD1803, with the SS14 among its other parts. Its parts include 42 resistors, 21 diodes, 11 capacitors, 5 transistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Exposure unit for making PCBs
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 330 | Resistors_SMD:R_0805 | R1, R2, R3, R4, R10, R11, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +5 |
| 20 | UV | LEDs:LED_D5.0mm | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 12 | 2,2k | Resistors_SMD:R_1206 | R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36 |
| 5 | 4,7k | Resistors_SMD:R_1206 | R13, R24, R37, R38, R40 |
| 4 | 0,1 | Capacitors_SMD:C_1206 | C3, C6, C7, C10 |
| 4 | MMBT3904 | TO_SOT_Packages_SMD:SOT-23 | Q2, Q3, Q4, Q5 |
| 2 | 220uF | Capacitors_SMD:CP_Elec_6.3x5.3 | C2, C8 |
| 2 | 22p | Capacitors_SMD:C_1206 | C4, C5 |
| 1 | 0,22 | Resistors_ThroughHole:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R39 |
| 1 | 1,2k | Resistors_SMD:R_0805 | R42 |
| 1 | 1,2k | Resistors_SMD:R_1206 | R12 |
| 1 | 16Mhz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | 2SD1803 | TO_SOT_Packages_SMD:TO-252-2 | Q1 |
| 1 | 3,6k | Resistors_SMD:R_0805 | R41 |
| 1 | 39uH | Choke_SMD:Choke_SMD_12x12mm_h8mm | L1 |
| 1 | 470uF | Capacitors_SMD:CP_Elec_8x10 | C11 |
| 1 | 47uF | Capacitors_SMD:CP_Elec_5x5.3 | C1 |
| 1 | 680 | Capacitors_SMD:C_1206 | C9 |
| 1 | ATMEGA8-AI | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | BARREL_JACK | Connectors:BARREL_JACK | CON1 |
| 1 | BUZZER | Buzzers_Beepers:MagneticBuzzer_ProSignal_ABI-009-RC | SP1 |
| 1 | CA56-12 | Displays_7-Segment:CA56-12CGKWA | AFF1 |
| 1 | CONN_02X05 | ab2_idc:AB2_HDR_M05-2V-S | P1 |
| 1 | MC34063 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | ROTARY_ENCODER_SWITCH | ab2_input_devices:AB2_ROTARY_ENCODER_W_SWITCH | SW1 |
| 1 | SS14 | Diodes_SMD:D_SMA | D21 |
| 1 | Shaman_LOGO | KiCad_mods:shaman_logo13x13 | Shaman |
The 89 most common of 94 parts.

daumemo/DIY-ESP-12E-LED-Strip-Controller-4-Channel
DIY LEd Strip Controller with ESP-12E



baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!


MattisLind/teleprinterHat
A RaspberryPi HAT that interfaces a old school teleprinter


It measures 150 × 100 mm and has 2 copper layers, 1.6 mm thick.
94 parts, built around the MC34063, MMBT3904, 2SD1803 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Shaman7312/UV-Exposure repository on GitHub, at the commit this page was made from: the board is UV-Exposer_KiCad/UV-Exposer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).