Skip to the content
2 layers210 × 145 mmPh verzion-01, the printed circuit board in 3D
Size
210 × 145 mm
Copper layers
2
Thickness
1.6 mm
Parts
104
Nets
99
Pads
391
Tracks, vias
0, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Jun 2026
Updated
11 Jun 2026

Overview

Ph verzion-01 is an open-source printed circuit board by tomas-fly, from the tomas-fly/davkovanie-ph-PCB repository on GitHub. It is a 2-layer board of 210 × 145 mm with 104 parts on 99 nets.

It is built around the TL071IP, ESP32-WROOM-32E-N4 and HLK-30M12, with the CA3140EZ, LM2596S-5.0 and ADS1115 among its other parts. Its parts include 31 resistors, 29 capacitors, 14 connectors, 12 ICs and 7 diodes. It belongs with the ESP32 boards of this library.

Main components

12

Parts

104
QtyValueFootprintReferences
14100nFCapacitor_SMD:C_0805_2012MetricC1, C6, C8, C15, C16, C17, C18, C21, C22, C23, C24, C25, C26, C28
610kResistor_SMD:R_0805_2012MetricR18, R19, R24, R25, R26, R27
5100RResistor_SMD:R_0805_2012MetricR20, R21, R22, R23, R30
41kResistor_SMD:R_0805_2012MetricR1, R5, R12, R29
430kResistor_SMD:R_0805_2012MetricR6, R7, R13, R14
4IRLR2905Package_TO_SOT_SMD:TO-252-2Q1, Q2, Q3, Q4
4SS14Diode_SMD:D_SMAD3, D4, D5, D6
310uFCapacitor_SMD:C_0805_2012MetricC4, C12, C27
31uFCapacitor_SMD:C_0805_2012MetricC11, C14, C20
34.7kResistor_SMD:R_0805_2012MetricR16, R17, R31
22.2kResistor_SMD:R_0805_2012MetricR3, R10
22.2nFCapacitor_SMD:C_0805_2012MetricC13, C19
24.7MResistor_SMD:R_0805_2012MetricR2, R9
25kPotentiometer_SMD:Potentiometer_Bourns_3214W_VerticalR4, R11
2600R@100MHzInductor_SMD:L_0805_2012MetricFB1, FB2
275kResistor_SMD:R_0805_2012MetricR8, R15
2CA3140EZPackage_DIP:DIP-8_W7.62mmU6, U8
2TL071IPPackage_DIP:DIP-8_W7.62mmU7, U9
1100nF_X2Capacitor_THT:C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3C29
110uF/16VCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC9
110uF/25VCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC7
110uHInductor_SMD:L_0805_2012MetricL2
112V_IOTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ12
11W_1Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ3
11W_2Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ4
11W_3Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ5
11W_4Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ6
1220uF/10VCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC3
122uFCapacitor_SMD:C_1206_3216MetricC5
1230V_INTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_HorizontalJ1
1275VVaristor:RV_Disc_D12mm_W4.2mm_P7.5mmMOV1
12A/250VFuse:Fuseholder_Cylinder-5x20mm_Schurter_FPG4_Vertical_ClosedF1
1330RResistor_SMD:R_0805_2012MetricR28
133uHInductor_SMD:L_Bourns-SRN1060L1
147uF/16VCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC10
1680uF/25VCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC2
1AC_OUT_230VTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_HorizontalJ11
1ADS1115Package_SO:MSOP-10_3x3mm_P0.5mmU10
1BlueLED_SMD:LED_0805_2012MetricD1
1DISPLAYConnector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_VerticalJ2
1ESP32-WROOM-32E-N4RF_Module:ESP32-WROOM-32EU11
1Finder_40.52Relay_THT:Relay_DPDT_Finder_40.52RLY1
1GPIO_EXTConnector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_VerticalJ7
1HLK-30M12Converter_ACDC:Converter_ACDC_Hi-Link_HLK-30MxxU1
1L7805ABD2TPackage_TO_SOT_SMD:TO-263-2U4
1LD1117AS33TRPackage_TO_SOT_SMD:SOT-223-3_TabPin2U3
1LM2596S-5.0Package_TO_SOT_SMD:TO-263-5_TabPin3U2
1LTV-356TPackage_SO:SOP-4_3.8x4.1mm_P2.54mmU12
1M7Diode_SMD:D_SMAD7
1ORP_BNCConnector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_HorizontalP2
1OUT3TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ9
1OUT4TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ10
1SS34Diode_SMD:D_SMCD2
1TPS60400Package_TO_SOT_SMD:SOT-23-5U5
1UARTConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1pH_BNCConnector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_HorizontalP1

Similar boards

  • 2 layers89.2 × 103.5 mmOas, the printed circuit board in 3D

    Oas

    hubertciebiada/open-ambient-sensor

    OAS — Open Ambient Sensor: DIY multi-sensor indoor environmental monitor (CO2, PM, VOC/NOx, temperature/humidity, mmWave presence) on ESP32-C6 with ESPHome / Home Assistant integration

    64 parts44GPL-3.0
  • 2 layers42 × 45.1 mmESP8266 LED controller, the printed circuit board in 3D

    ESP8266 LED controller

    daumemo/DIY-ESP-12E-LED-Strip-Controller-4-Channel

    DIY LEd Strip Controller with ESP-12E

    31 parts5GPL-3.0
  • 2 layers100 × 85 mmESP32 MediaCarrier routed, the printed circuit board in 3D

    ESP32 MediaCarrier routed

    xmyoot/esp32-media-carrier

    ESP32 multimedia carrier board with 7–24 V DC buck regulator, 3.2 W Class-D I2S audio amp, WS2812 LED ring driver, and SPI TFT display header

    97 partsMIT
  • 2 layers82 × 99 mmZudo pd, the printed circuit board in 3D

    Zudo pd

    Takazudo/zudo-pd

    P15 r1 is the common 27 × 40 mm STUSB4500 15 V / 3 A module for LED first, then PD15. The same PCB, population and NVM image serve both. Source: board-p15-draft.kicadpcb and ../../scripts/schgen/boardp15spec.py.

    94 parts1
  • 2 layers98.5 × 16 mmPCB design Course, the printed circuit board in 3D

    PCB design Course

    AvishkaVishwa/12V-to-5V-DC-Conveter

    12 parts1
  • 2 layers320 × 136 mmGov tracker Panel, the printed circuit board in 3D

    Gov tracker Panel

    lectrotel/Gov_tracker_PCB

    Govenor tracker PCB

    689 parts
  • 4 layersPantiltslide integrated, the printed circuit board in 3D

    Pantiltslide integrated

    AMOVFC/PanTilt

    Three projects live in this folder. They share NewLibrary.kicadsym, TMC2209.pretty and the same philosophy: nothing on the board needs precision placement, every active part is a module in a socket.

    86 parts

Questions

How big is the Ph verzion-01 PCB?

It measures 210 × 145 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ph verzion-01 use?

104 parts, built around the TL071IP, ESP32-WROOM-32E-N4, HLK-30M12 and CA3140EZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ph verzion-01 KiCad files?

From the tomas-fly/davkovanie-ph-PCB repository on GitHub, at the commit this page was made from: the board is pcb pred routovanim - bez chyb ktore treba opravovat/ph-verzion-01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ph verzion-01 design in my own project?

Its repository states no licence, so its author keeps all rights: ask tomas-fly before reusing the design.