4 layers430 × 310 mm
2 layers450 × 150 mm
InverterBoostConverter
datacrystals/TractionInverterV31- Size
- 450 × 150 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 246
- Nets
- 143
- Pads
- 707
- Tracks, vias
- 1,050, 965
- Pours
- 34
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Feb 2025
- Updated
- 28 May 2025
Overview
InverterBoostConverter is an open-source printed circuit board by datacrystals, from the datacrystals/TractionInverterV3 repository on GitHub. It is a 2-layer board of 450 × 150 mm with 246 parts on 143 nets, routed with 1,050 tracks and 965 vias.
It is built around the ARDUINO UNO R3, UCC27424QDRQ1 and UCC28220D, with the LM358DR, TL431AIDBZR and IHDM1008BCEV2R2M20 among its other parts. Its parts include 80 resistors, 66 capacitors, 24 diodes, 14 ICs and 12 inductors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
11
ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorised
UCC27424QDRQ1
SOIC-8-40℃~+125℃ 15ns 2 20ns 25ns 35ns 4.5A 4.8A 4V~15V Low Side MOSFET SOIC-8 Gate Drivers ROHSTexas InstrumentsGate Drivers
UCC28220D
SOIC-16-40℃~+105℃@(TJ) 1.5mA 2 500kHz、1MHz 8.4V~14.5V External Flyback、Forward No SOIC-16 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
LM358DR
UncategorisedUnknown maker
TL431AIDBZR
SOT-23-40℃~+85℃ 100mA 2.495V~36V 2.495V~36V 2uA 400uA Adjustable Parallel ±1% SOT-23 Voltage Reference ROHSNexperiaVoltage ReferenceIHDM1008BCEV2R2M20
-0.7mΩ 2.2uH 204A 63A 69MHz ±20% - Color Ring Inductors / Through Hole Inductors ROHSVishay IntertechnologyColor Ring Inductors / Through Hole Inductors
FBMJ1608HS220NTR
06031 22Ω@100MHz 4mΩ 7.5A ±30% 0603 Ferrite Beads ROHSTaiyo YudenFerrite Beads
MMSZ5231B-TP
SOD-123-55℃~+150℃ 1 Independent 1.6kΩ 17Ω 5.1V 500mW 5uA SOD-123 Zener Diodes ROHSMicro Commercial ComponentsZener Diodes
LTST-C230GKT
1206130° 14mcd 2.1V 20mA 565nm 569nm Emerald Green Water Clear 1206 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
1SMB2EZ15_R1_00001
SMB(DO-214AA)-55℃~+150℃ 1 Independent 14.25V~15.75V 15V 2W 500nA@11.4V 700Ω 7Ω SMB(DO-214AA) Zener Diodes ROHSPANJIT InternationalZener DiodesLTST-C230CKT
1206-55℃~+85℃ 1.8V 100mW 130° 20mA 25mcd 638nm 660nm Red Reverse Mount Water Clear 1206 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
Parts
246| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | RC2512JK-071ML | InverterCom:RESC6431X65N | R1, R2, R3, R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R17, R18, R65 +12 |
| 20 | VS-30CDU06HM3_I | InverterCom:VS30CDU06HM3I | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 14 | 100nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C18, C23, C34, C48, C58, C60, C61, C64, C65, C69, C70, C73, C74, C79 |
| 12 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C19, C24, C33, C57, C59, C62, C63, C66, C72, C75, C76, C80 |
| 12 | IHDM1008BCEV2R2M20 | InverterCom:IHDM1008BCEV2R2M20 | L1, L2, L3, L4, L5, L6, L7, L8, L9, L10, L11, L12 |
| 10 | , , , , , , , , , | ||
| 10 | 330uF | InverterCom:CAPPRD1000W190D2250H2700 | C44, C45, C46, C50, C51, C52, C53, C54, C55, C56 |
| 7 | 10k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R28, R40, R46, R47, R51, R55, R59 |
| 7 | 1nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C27, C29, C30, C35, C36, C47, C77 |
| 6 | 0 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R29, R30, R41, R43, R58, R61 |
| 6 | 100k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R22, R26, R37, R49, R50, R80 |
| 6 | 75uF | InverterCom:ALH82A750CB600 | C14, C15, C17, C37, C38, C39 |
| 5 | LM358DR | InverterCom:SOIC127P600X175-8N | IC2, IC4, IC5, IC8, IC9 |
| 4 | 1 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R45, R52, R53, R56 |
| 4 | 1uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C4, C5, C20, C22 |
| 4 | 220 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R62, R63, R64, R79 |
| 4 | 470pF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C31, C32, C71, C78 |
| 4 | FBMJ1608HS220NTR | InverterCom:BEADC1608X100N | FB1, FB2, FB3, FB4 |
| 4 | IMBG65R015M2H | InverterCom:TO127P1500X470-8N-2-V1 | Q1, Q2, Q4, Q5 |
| 4 | MMSZ5231B-TP | InverterCom:SOD3716X135N | Z2, Z3, Z4, Z5 |
| 4 | ~ | InverterCom:WireSolderJoint | J7, J8, J9, J10 |
| 3 | 1000uF | InverterCom:CAPPRD500W60D1025H1750 | C1, C2, C3 |
| 3 | 1k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R34, R35, R57 |
| 3 | LTST-C230GKT | InverterCom:LEDC3216X120N | LED2, LED3, LED4 |
| 3 | ~ | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R38, R42, R44 |
| 2 | 120k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R32, R71 |
| 2 | 1987724 | InverterCom:1987724 | J1, J2 |
| 2 | 1M | InverterCom:RESC6431X65N | R70, R77 |
| 2 | 22pF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C67, C68 |
| 2 | 4.7k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R39, R54 |
| 2 | ACS758xCB-200U-PFF | Sensor_Current:Allegro_CB_PFF | U1, U6 |
| 2 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5, J6 |
| 2 | Conn_Coaxial | Connector_Coaxial:SMA_Wurth_60312002114503_Vertical | J3, J4 |
| 2 | TMP36xS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U5 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_3.0x3.0mm | TP1, TP2 |
| 1 | 10.2k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R24 |
| 1 | 101.85k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R20 |
| 1 | 10nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C25 |
| 1 | 12.79k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R19 |
| 1 | 120 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R60 |
| 1 | 149.21k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R21 |
| 1 | 180pF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C21 |
| 1 | 1SMB2EZ15_R1_00001 | InverterCom:1SMB2EZ15_R1_00001 | Z1 |
| 1 | 28k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R33 |
| 1 | 300k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R48 |
| 1 | 4.7uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C28 |
| 1 | 40.8k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R23 |
| 1 | 40k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R78 |
| 1 | 45.00k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R31 |
| 1 | 5.6k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R27 |
| 1 | 7k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R25 |
| 1 | 800.00k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R36 |
| 1 | 8MHz | Crystal:Crystal_SMD_7050-2Pin_7.0x5.0mm_HandSoldering | Y1 |
| 1 | Arduino_UNO_R3 | InverterCom:Arduino_UNO_R3_ModifiedCourtyard | A1 |
| 1 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabels | JP1 |
| 1 | LTST-C230CKT | InverterCom:LEDC3216X120N | LED1 |
| 1 | MCP2515-e_ST | InverterCom:SOP65P640X120-20N | IC6 |
| 1 | SIHFR120-GE3 | InverterCom:SIHFR120GE3 | Q3 |
| 1 | SW_Push | Connector_Coaxial:SMA_Wurth_60312002114503_Vertical | SW1 |
| 1 | TJA1050T_CM,118 | InverterCom:SOIC127P600X175-8N | IC7 |
| 1 | TL431AIDBZR | InverterCom:SOT95P237X112-3N | U2 |
| 1 | UCC27424QDRQ1 | InverterCom:SOIC127P600X175-8N | IC3 |
| 1 | UCC28220D | InverterCom:UCC28220D | IC1 |
| 1 | ~ | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C26 |
The 237 most common of 246 parts.
More from datacrystals/TractionInverterV3
6- 4 layers250 × 150 mm
- 4 layers250 × 150 mm
- 4 layers350 × 150 mm
- 4 layers125 × 85 mm
- 4 layers112.5 × 120 mm
Similar boards
- 4 layers175 × 125 mm
- 2 layers100 × 76 mm
Emc flyback
ChengminLi/AI-PCB-layout
AI agent skill for designing and reviewing power-electronics PCBs, with a human review gate after every step
90 parts31CC-BY-4.0 - 4 layers198.4 × 104.3 mm
DC33
Maritime-Hacking-Village/Badge-2025
Public repository for the official MHV 2025 badge.
200 parts15CERN-OHL-W-2.0 - 4 layers240 × 80 mm
- 8 layers64 × 56 mm
PS GAN-60W
jonahsaunders/planar-studio
KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.
89 parts4MIT - 2 layers43.6 × 25.5 mm
BikeUSBv2
H3wastooshort/BikeUSBv2
Charge your Phone off of your Bike while adapting charging power to available power / riding speed.
63 parts1GPL-3.0 - 2 layers85.6 × 54 mm
Wallet dmm
ArgonautGit/wallet_dmm
A multimeter the size of a credit card: DC volts, resistance, continuity and diode test, shown on a 0.91" OLED, with three buttons, an RGB LED and a piezo beeper.
70 parts - 2 layers58 × 58 mm
Ups lead acid electgpl v1.0
electgpl/MiniUPS12VLead-Acid
This project implements a mini uninterruptible power supply (UPS) designed for 12V Lead-Acid AGM/GEL batteries. It integrates a dedicated CN3767 lead-acid charger, a PMOS + Schottky bypass circuit, a TPS54360 buck…
78 parts
Questions
How big is the InverterBoostConverter PCB?
It measures 450 × 150 mm and has 2 copper layers, 1.6 mm thick.
What parts does the InverterBoostConverter use?
246 parts, built around the ARDUINO UNO R3, UCC27424QDRQ1, UCC28220D and LM358DR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InverterBoostConverter KiCad files?
From the datacrystals/TractionInverterV3 repository on GitHub, at the commit this page was made from: the board is Boards/DCLinkBusVRM/InverterBoostConverter.kicad_pcb and its schematic Boards/ControlBoard/AnalogInFilters.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the InverterBoostConverter design in my own project?
Its repository states no licence, so its author keeps all rights: ask datacrystals before reusing the design.