

DynamicBrakeGrid
- Size
- 350 × 150 mm
- Copper layers
- 4
- Thickness
- 1.64 mm
- Parts
- 166
- Nets
- 94
- Pads
- 467
- Tracks, vias
- 474, 1,187
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Feb 2025
- Updated
- 28 May 2025
Overview
DynamicBrakeGrid is an open-source printed circuit board by datacrystals, from the datacrystals/TractionInverterV3 repository on GitHub. It is a 4-layer board of 350 × 150 mm with 166 parts on 94 nets, routed with 474 tracks and 1,187 vias.
It is built around the ISO1042BDWVR, ARDUINO UNO R3 and RFMM-0505S, with the ACS758ECB-200U-PFF-T, UCC27424QDRQ1 and LM358DR among its other parts. Its parts include 68 capacitors, 22 resistors, 20 connectors, 6 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12ISO1042BDWVR
SOIC-8-300mil-40℃~+125℃ 1.71V~5.5V、4.5V~5.5V 5Mbps 73.4mA CAN FD Transceiver SOIC-8-300mil CAN Transceivers ROHSTexas InstrumentsCAN TransceiversARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorisedRFMM-0505S
SIP,19.5x6mmIsolated Power ModulesYLPTECACS758ECB-200U-PFF-T
CB-5-40℃~+85℃ 120kHz 200A 20mV/A 3V~5.5V 3us 700Vrms Not supported CB-5 Current Sensors ROHSAllegro MicroSystems, LLCCurrent SensorsUCC27424QDRQ1
SOIC-8-40℃~+125℃ 15ns 2 20ns 25ns 35ns 4.5A 4.8A 4V~15V Low Side MOSFET SOIC-8 Gate Drivers ROHSTexas InstrumentsGate DriversLM358DR
UncategorisedUnknown makerALH82A750CB600
插件,D30xL30mm-40℃~+105℃ 1.861Ω@100Hz 10mm 3000hrs@105℃ 30mm 30mm 600V 75uF 970mA@100Hz Polarized ±20% Plugin,D30xL30mm Horn-Type Electrolytic Capacitors ROHSKEMETHorn-Type Electrolytic CapacitorsUVY1E102MPD1TD
插件-55℃~+105℃ 1000hrs@105℃ 1000uF 10mm 25V 5mm 610mA@120Hz ±20% 插件 Aluminum Electrolytic Capacitors - Leaded ROHSNichiconAluminum Electrolytic Capacitors - Leaded1SMB2EZ15_R1_00001
SMB(DO-214AA)-55℃~+150℃ 1 Independent 14.25V~15.75V 15V 2W 500nA@11.4V 700Ω 7Ω SMB(DO-214AA) Zener Diodes ROHSPANJIT InternationalZener DiodesB32652A0104K000
插件,P=15mm-55℃~+100℃ 100nF 1kV ±10% 插件,P=15mm Polypropylene Film Capacitors (CBB) ROHSTDKPolypropylene Film Capacitors (CBB)1SMB5956BT3G
SMBSMB Zener Diodes ROHSZhengxinZener DiodesB32774X0205K000
插件,P=27.5mm-40℃~+105℃ 1kV 2uF ±10% 插件,P=27.5mm Polypropylene Film Capacitors (CBB) ROHSTDKPolypropylene Film Capacitors (CBB)
Parts
166| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C32, C34, C37, C39, C60, C61, C64, C65, C69, C70, C72, C74, C77, C79, C80, C81 +6 |
| 16 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C26, C27, C28, C29, C36, C59, C62, C63, C66, C71, C73, C75, C78, C86, C90, C91 |
| 12 | 5442251 | InverterCom:5442251 | J5, J6, J7, J8, J9, J10, J11, J12, J14, J15, J24, J25 |
| 12 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1, M2, M3, M4, M5, M6, M7, M8, M9, M10, M11, M12 |
| 9 | 4.7k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R1, R2, R3, R4, R39, R50, R59, R72, R73 |
| 8 | ALH82A750CB600 | InverterCom:ALH82A750CB600 | C12, C13, C14, C15, C16, C17, C18, C19 |
| 8 | MountingHole_Pad | MountingHole:MountingHole_5.3mm_M5_ISO7380_Pad | H1, H2, H3, H4, H7, H8, H9, H10 |
| 8 | UVY1E102MPD1TD | InverterCom:CAPPRD500W60D1025H1750 | C2, C3, C4, C5, C6, C7, C8, C9 |
| 6 | 38969-0002 | InverterCom:389690002 | J13, J18, J19, J20, J21, J22 |
| 6 | RC2512JK-071ML | InverterCom:RESC6431X65N | R65, R66, R67, R68, R69, R70 |
| 6 | TestPoint | TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP23, TP24, TP25, TP26, TP27, TP28 |
| 5 | 22pF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C67, C68, C93, C94, C95 |
| 4 | 1SMB2EZ15_R1_00001 | InverterCom:1SMB2EZ15_R1_00001 | Z1, Z9, Z10, Z11 |
| 4 | B32652A0104K000 | InverterCom:B32652__18_x_9_ | C96, C97, C102, C103 |
| 3 | 1SMB5956BT3G | InverterCom:DIOM5436X247N | Z2, Z4, Z5 |
| 2 | 1987724 | InverterCom:1987724 | J1, J2 |
| 2 | 220 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R62, R63 |
| 2 | B32774X0205K000 | InverterCom:B32774X__31.5_x_12.5_ | C98, C104 |
| 2 | LM358DR | InverterCom:SOIC127P600X175-8N | IC5, IC8 |
| 2 | LOGO | InverterCom:Silkscreen_Logo_CelstialBeing_S | G***, G*** |
| 1 | 1 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R52 |
| 1 | 10 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R53 |
| 1 | 120 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R60 |
| 1 | 1k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R51 |
| 1 | 1nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C38 |
| 1 | 470pF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C76 |
| 1 | 60k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R71 |
| 1 | 8MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | ACS758ECB-200U-PFF | Sensor_Current:Allegro_CB_PFF | U6 |
| 1 | ACT45B-101-2P-TL003 | InverterCom:ACT45B1012PTL003 | FL1 |
| 1 | Arduino_UNO_R3 | InverterCom:Arduino_UNO_R3_ModifiedCourtyard | A1 |
| 1 | C4AQNBW5200M3LJ | InverterCom:C4AQNBW5200M3LJ | C87 |
| 1 | FBMJ1608HS220NTR | InverterCom:BEADC1608X100N | FB1 |
| 1 | FZ400R12KE4 | InverterCom:FZ400R12KE4 | Q1 |
| 1 | ISO1042BDWVR | InverterCom:SOIC127P1150X280-8N | IC1 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LOGO | InverterCom:ra | G*** |
| 1 | LTST-C230CKT | InverterCom:LEDC3216X120N | LED1 |
| 1 | LTST-C230GKT | InverterCom:LEDC3216X120N | LED2 |
| 1 | MCP2515-e_ST | InverterCom:SOP65P640X120-20N | IC6 |
| 1 | MMSZ5231B-TP | InverterCom:SOD3716X135N | Z3 |
| 1 | RFMM-0505S | InverterCom:RFMM0505S | PS1 |
| 1 | UCC27424QDRQ1 | InverterCom:SOIC127P600X175-8N | IC3 |
The 162 most common of 166 parts.
More from datacrystals/TractionInverterV3
6- 2 layers450 × 150 mm

- 4 layers430 × 310 mm

- 4 layers250 × 150 mm

- 4 layers250 × 150 mm

- 4 layers125 × 85 mm

- 4 layers112.5 × 120 mm

Similar boards
- 4 layers175 × 125 mm

- 4 layers240 × 160 mm

- 2 layers70 × 94 mm

- 2 layers60 × 52 mm

ADuM3165 USB ISOLATION
Fominsky/HIGH-SPEED-USB-ISOLATOR
High-speed USB isolator with external power based on ADuM3165/ADuM3166
68 parts4 - 4 layers154.5 × 112.9 mm

LibrePLC32
AndreiVladescu/LibrePLC32
The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.
295 parts14CERN-OHL-P-2.0 - 4 layers69.5 × 62.6 mm

Sensors Module
Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.
197 parts4 - 4 layers143.1 × 87.6 mm

Thermistor Expansion Module
Gad9889/Thermistor-Expansion-Module
KiCad project files remain at the repository root. Hierarchical schematic sheets are organized under schematics/, with connector sheets in schematics/connectors/ and gate sheets in schematics/gates/.
114 parts - 2 layers249 × 180.3 mm

Kicad snapshot step16 rev a layout complete 20260324 150352
jgrano/Nx-PCBA
Install all of these before opening the project:
91 parts
Questions
How big is the DynamicBrakeGrid PCB?
It measures 350 × 150 mm and has 4 copper layers, 1.64 mm thick.
What parts does the DynamicBrakeGrid use?
166 parts, built around the ISO1042BDWVR, ARDUINO UNO R3, RFMM-0505S and ACS758ECB-200U-PFF-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DynamicBrakeGrid KiCad files?
From the datacrystals/TractionInverterV3 repository on GitHub, at the commit this page was made from: the board is Boards/DynamicBrakeGrid/DynamicBrakeGrid.kicad_pcb and its schematic Boards/ControlBoard/AnalogInFilters.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DynamicBrakeGrid design in my own project?
Its repository states no licence, so its author keeps all rights: ask datacrystals before reusing the design.